{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1K0610FE7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1K0610FE7","canonicalUrl":"https://aoctrl.com/schneider/LC1K0610FE7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1K0610FE7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys K contactor, 3-pole, AC-3/AC-3e 6 A at 440 V, 115 V AC coil, 1 NO auxiliary contact, screw clamp terminals.","salesMarkdown":"The Schneider LC1K0610FE7 is a 3-pole contactor from the TeSys K series, rated for motor control duty at 6 A in AC-3 and AC-3e utilisation categories up to 440 V. The 6 A figure means it handles motors drawing that current during running; the inrush during start is higher but the contactor is designed for that duty cycle per EN/IEC 60947-4-1. The coil is 115 V AC, drawing 30 VA inrush and 4.5 VA hold-in power at 20 °C. Heat dissipation is 1.3 W, which matters for enclosure temperature rise when multiple contactors are ganged on a DIN rail. Electrical durability is rated at 1.3 million cycles at 6 A AC-3, and mechanical durability at 10 million cycles. The B10d value for the contactor under nominal load is 1,369,863 cycles per EN/ISO 13849-1, which is relevant if this contactor is used in a safety-related control circuit. ## Integration notes The contactor has one built-in instantaneous NO auxiliary contact. Screw clamp terminals accept 1.5 to 4 mm² solid or 0.75 to 4 mm² flexible wire, with a tightening torque of 0.8 to 1.3 N·m. The IP2X finger protection per VDE 0106 means it is safe for open-panel use where accidental contact is a concern. Operating altitude is 2000 m without derating. The coil operates between 0.8 and 1.15 times the rated control voltage, and drops out at or above 0.2 Uc below 50 °C. Minimum switching capability for the signalling circuit is 5 mA at 17 V, so it can handle low-level PLC inputs without issues.","metaTitle":"Schneider LC1K0610FE7 TeSys K Contactor, 3P, 6A AC-3, 115V A","metaDescription":"Schneider TeSys K contactor LC1K0610FE7, 3-pole, 6 A at 440 V AC-3/AC-3e, 115 V AC coil, 1 NO aux. Active production. UL/CSA/IEC. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"57 mm","Range":"TeSys","Width":"45 mm","Height":"58 mm","Standards":"EN/IEC 60947-4-1 GB/T 14048.4 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1","Operating time":"10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing","Coil technology":"Without built-in suppressor module","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102","Heat dissipation":"1.3 W","Mounting support":"Rail Plate","Device short name":"LC1K","Poles description":"3P","Tightening torque":"0.8...1.3 N.m - on screw clamp terminals Philips No 2 0.8...1.3 N.m - on screw clamp terminals flat Ø 6 mm 0.8...1.3 N.m - on screw clamp terminals pozidriv No 2","Device application":"Control","Inrush power in VA":"30 VA (at 20 °C)","Operating altitude":"2000 m without derating","Non overlap distance":"0.5 mm","Protective treatment":"TC conforming to IEC 60068 TC conforming to DIN 50016","Utilisation category":"AC-3 AC-3e AC-4","Contactor application":"Motor control","Electrical durability":"1.3 Mcycles 6 A AC-3 at Ue 1.3 Mcycles 6 A AC-3e at Ue 0.05 Mcycles 36 A AC-4 at Ue <= 440 V","Mechanical durability":"10 Mcycles","Mechanical robustness":"Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6","Maximum operating rate":"3600 cyc/h","Auxiliary contacts type":"type instantaneous 1 NO","Connections - terminals":"Screw clamp terminals 1 cable(s) 1.5...4 mm²solid Screw clamp terminals 1 cable(s) 0.75...4 mm²flexible without cable end Screw clamp terminals 1 cable(s) 0.34...2.5 mm²flexible with cable end Screw clamp terminals 2 cable(s) 1.5...4 mm²solid Screw clamp terminals 2 cable(s) 0.75...4 mm²flexible without cable end Screw clamp terminals 2 cable(s) 0.34...1.5 mm²flexible with cable end","IP degree of protection":"IP2X conforming to VDE 0106","Safety reliability level":"B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1","Minimum switching current":"5 mA for signalling circuit","Minimum switching voltage":"17 V for signalling circuit","Product or component type":"Contactor","Signalling circuit frequency":"<= 400 Hz","Control circuit voltage limits":"Operational: 0.8...1.15 Uc (at Drop-out: >= 0.20 Uc (at <50 °C)","Power Pole Contact Composition":"3 NO","[Ue] rated operational voltage":"Power circuit: Signalling circuit: 10 MOhm for signalling circuit","Hold-in power consumption in VA":"4.5 VA (at 20 °C)","Ambient air temperature for storage":"-50...80 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/640eb008cbcf67e513dd05cab96ce665.pdf","sourceUrl":"https://www.se.com/vn/en/product/LC1K0610FE7/contactor-tesys-k-3p-ac3-ac3e440v-6a-aux-1no-115v-ac-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1K0610FE7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"The LC1K0610FE7 is a 3-pole contactor rated 6 A at 440 V in AC-3 and AC-3e utilisation categories. The coil is 115 V AC. It has one NO auxiliary contact and screw clamp terminals."},{"question":"What compliance documentation does this part carry?","answer":"It is certified to EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and JIS C8201-4-1. Flame retardance is V1 per UL 94, and it meets NF F 16-101 and NF F 16-102 for railway fire behaviour."},{"question":"What is the depth of the LC1K0610FE7?","answer":"The depth is 57 mm. Width is 45 mm and height is 58 mm."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1K0610FE7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1K0610FE7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}