{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1K09008N7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1K09008N7","canonicalUrl":"https://aoctrl.com/schneider/LC1K09008N7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1K09008N7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys K LC1K09008N7 contactor, 4-pole, 2 NO + 2 NC, 400-415 VAC 50/60 Hz coil, screw clamp terminals, DIN rail or plate mount.","salesMarkdown":"## What this 4-pole contactor is wired to do The LC1K09008N7 is a TeSys K contactor with a 400-415 VAC 50/60 Hz coil and a 4-pole contact configuration of 2 normally-open and 2 normally-closed. ## Panel fit and wiring constraints Screw clamp terminals accept 1.5-4 mm² solid or 0.75-4 mm² flexible wire (without ferrule); two wires can be clamped per terminal on the same cross-section range. Tightening torque is 0.8-1.3 N·m. IP2X finger protection per VDE 0106 means the contactor is safe for open-panel mounting where incidental contact is possible. Coil inrush is 30 VA at 20 °C, holding power 4.5 VA; the heat dissipation of 1.3 W is manageable in a standard enclosure without forced airflow. ## Switching performance and duty cycle The coil dropout time (NO opening) is 10-20 ms, coil pickup (NO closing) also 10-20 ms; NC transitions are slightly slower at 15-25 ms opening and 5-15 ms closing. Rated making capacity is 110 A AC for the power circuit per IEC 60947 and NF C 63-110. Associated fuse ratings for short-circuit protection are 25 A gG or 25 A aM in the power circuit. Impulse withstand voltage is 8 kV, overvoltage category III. Flame retardance is V1 per UL 94, plus NF F 16-101 and NF F 16-102 Level 2 — relevant for rail-rolling-stock applications. Safety reliability data: B10d = 1,369,863 cycles under nominal load, 20,000,000 cycles under mechanical load per EN/ISO 13849-1.","metaTitle":"Schneider Electric LC1K09008N7 TeSys K Contactor","metaDescription":"Schneider Electric LC1K09008N7 TeSys K 4-pole contactor, 400-415 VAC 50/60 Hz coil, 2 NO + 2 NC contacts. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"2.2 in (57 mm)","Range":"TeSys","Width":"1.8 in (45 mm)","Height":"2.3 in (58 mm)","Category":"22326-CTR,K-LINE,AC,OPEN,NONREV","Standards":"EN/IEC 60947-4-1 GB/T 14048.4 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1","Operating time":"10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing 15...25 ms coil de-energisation and NC closing 5...15 ms coil energisation and NC opening","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102","Heat dissipation":"1.3 W","Mounting Support":"Rail Plate","Range of Product":"TeSys K","Average impedance":"3 mOhm - Ith 20 A 50 Hz for power circuit","Poles description":"4P","Tightening torque":"7.08...11.5 lbf.in (0.8...1.3 N.m) screw clamp terminals Philips No 2 7.08...11.5 lbf.in (0.8...1.3 N.m) screw clamp terminals flat Ø 6 mm 7.08...11.5 lbf.in (0.8...1.3 N.m) screw clamp terminals pozidriv No 2","Inrush power in VA":"30 VA (at 68 °F (20 °C))","Operating altitude":"6561.68 ft (2000 m) without derating","Control circuit type":"AC 50/60 Hz","Overvoltage category":"III","Protective treatment":"TC IEC 60068 TC DIN 50016","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"25 A gG at 25 A aM for power circuit","Maximum operating rate":"3600 cyc/h","Connections - terminals":"screw clamp terminals 1 0.002...0.006 in² (1.5...4 mm²)solid screw clamp terminals 1 0.001...0.006 in² (0.75...4 mm²)flexible without cable end screw clamp terminals 1 0.0005...0.004 in² (0.34...2.5 mm²)flexible with cable end screw clamp terminals 2 0.002...0.006 in² (1.5...4 mm²)solid screw clamp terminals 2 0.001...0.006 in² (0.75...4 mm²)flexible without cable end screw clamp terminals 2 0.0005...0.002 in² (0.34...1.5 mm²)flexible with cable end","IP degree of protection":"IP2X VDE 0106","Rated breaking capacity":"110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947","Pole contact composition":"2 NO + 2 NC","Safety reliability level":"B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1","Product or Component Type":"Contactor","Irms rated making capacity":"110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947","[Uc] control circuit voltage":"400...415 V AC 50/60 Hz","[Ui] rated insulation voltage":"Power circuit 600 V UL 508 Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA C22.2 No 14","Control circuit voltage limits":"Operational: 0.85...1.1 Uc (at Drop-out: 0.2...0.75 Uc (at <122 °F (50 °C))","[Ue] rated operational voltage":"Power circuit 690 V AC 50/60 Hz","Hold-in power consumption in VA":"4.5 VA (at 68 °F (20 °C))","Ambient Air Temperature for Storage":"-58...176 °F (-50...80 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Ith] conventional free air thermal current":"20 A (at 122 °F (50 °C)) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$27.08","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/LC1K09008N7/tesys-k-contactor-4p-2-no-+-2-nc-ac1-440-v-20-a-400-415-v-ac-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1K09008N7/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider provide for the LC1K09008N7?","answer":"It meets flame-retardance V1 per UL 94 and NF F 16-101/102 Level 2."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1K09008N7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1K09008N7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}