{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1K098P7S335","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1K098P7S335","canonicalUrl":"https://aoctrl.com/schneider/LC1K098P7S335","factsUrl":"https://aoctrl.com/api/mcp/products/LC1K098P7S335","rawCanonicalId":null},"summary":{"shortDescription":"Schneider LC1K098P7S335 Tesys K Contactors — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.","salesMarkdown":"## Overview The LC1K098P7S335 is a Schneider TeSys K contactor, 4-pole configuration with 2 NO + 2 NC power contacts, rated for 20 A switching current in AC-1 utilization category. The coil is 230 VAC at 50/60 Hz, drawing 4.5 W holding power, and the main circuit is rated up to 690 V supply voltage. The contactor uses an AC-operated coil without built-in suppression; the 4.5 W heat dissipation (1.3 W at coil) means the panel temperature rise is modest even under continuous hold-in. The 2 NO + 2 NC pole arrangement suits control of dual-speed motors, reversing starters, or loads requiring separate normally-open and normally-closed paths in the same frame. Switching current of 20 A at AC-1 covers resistive and lightly inductive loads up to 690 V line-to-line. The 10 ms operating time is fast enough for most sequencing but not for high-speed synchronous switching — plan for mechanical life of 10 Mcycles and electrical life of 0.16 Mcycles at rated load. ## Applications TeSys K contactors of this size are common in panel building for motor control centres, lighting contactor panels, and HVAC equipment where 4-pole switching is needed. The 20 A AC-1 rating also suits resistive heating loads, transformer primary switching, and capacitor bank switching with appropriate derating. The compact 45 mm width fits tightly packed DIN-rail assemblies. Within the TeSys K range, the LC1K098P7S335 fills the niche for 4-pole contactors with a mixed NO/NC contact arrangement — most peers offer 4 NO or 3 NO + 1 NC. The 230 VAC coil is a standard voltage for European and Asian panels, and the screw-clamp terminals accept up to 4 mm² solid or 2.5 mm² flexible with ferrule, matching typical control wiring practices.","metaTitle":"Schneider LC1K098P7S335 TeSys K Contactor, 4 Pole, 230 VAC Coil","metaDescription":"Schneider TeSys K LC1K098P7S335 contactor: 4 poles, 2 NO + 2 NC, 20 A switching current, 230 VAC 50/60 Hz coil, 690 V supply, IP20, EN/IEC 60947-4-1.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"57 mm","Range":"TeSys","Width":"45 mm","Height":"58 mm","Standards":"EN/IEC 60947-4-1 GB/T 14048.4 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1","Operating time":"10...20 ms coil energisation and NO closing 5...15 ms coil energisation and NC opening 10...20 ms coil de-energisation and NO opening 15...25 ms coil de-energisation and NC closing","Coil technology":"Without built-in suppressor module","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102","Heat dissipation":"1.3 W","Mounting support":"Rail Plate","Average impedance":"3 mOhm - Ith 20 A 50 Hz for power circuit","Device short name":"LC1K","Poles description":"4P","Tightening torque":"0.8 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm 0.8 N.m - on screw clamp terminals - with screwdriver Philips No 2 0.8 N.m - on screw clamp terminals - with screwdriver pozidriv No 2","Device application":"Control","Inrush power in VA":"30 VA (at 20 °C)","Operating altitude":"0...2000 m without derating","Control circuit type":"AC at 50/60 Hz","Overvoltage category":"III","Protective treatment":"TC conforming to IEC 60068 TC conforming to DIN 50016","Utilisation category":"AC-1","Contactor application":"Resistive load","Electrical durability":"0.16 Mcycles 20 A AC-1 at Ue <= 690 V","Mechanical durability":"10 Mcycles","Mechanical robustness":"Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6","Associated fuse rating":"25 A gG at 25 A aM for power circuit","Maximum operating rate":"3600 cyc/h","Connections - terminals":"Screw clamp terminals 1 cable(s) 1.5...4 mm²solid Screw clamp terminals 1 cable(s) 0.75...4 mm²flexible without cable end Screw clamp terminals 1 cable(s) 0.34...2.5 mm²flexible with cable end Screw clamp terminals 2 cable(s) 1.5...4 mm²solid Screw clamp terminals 2 cable(s) 0.75...4 mm²flexible without cable end Screw clamp terminals 2 cable(s) 0.34...1.5 mm²flexible with cable end","IP degree of protection":"IP20 conforming to VDE 0106","Rated breaking capacity":"110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947","Safety reliability level":"B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1","Product or component type":"Contactor","Irms rated making capacity":"110 A AC for power circuit conforming to IEC 60947","[Uc] control circuit voltage":"230 V AC 50/60 Hz","[Ui] rated insulation voltage":"Power circuit: 600 V conforming to UL 60947-4-1 Power circuit: 600 V conforming to CSA C22.2 No 60947-4-1 Power circuit: 690 V conforming to IEC 60947-4-1 Power circuit: 690 V conforming to BS 5424 Power circuit: 690 V conforming to NF C 20-040 Power circuit: 750 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.8...1.15 Uc (at Drop-out: >= 0.20 Uc (at <50 °C)","Power Pole Contact Composition":"2 NO + 2 NC","[Ie] rated operational current":"20 A (at <60 °C) at <= 690 V AC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: Signalling circuit: <= 690 V AC <= 400 Hz","Hold-in power consumption in VA":"4.5 VA (at 20 °C)","Ambient air temperature for storage":"-50...80 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"90 A 50 °C - 1 s for power circuit 85 A 50 °C - 5 s for power circuit 80 A 50 °C - 10 s for power circuit 60 A 50 °C - 30 s for power circuit 45 A 50 °C - 1 min for power circuit 40 A 50 °C - 3 min for power circuit 20 A 50 °C - >= 15 min for power circuit","[Ith] conventional free air thermal current":"20 A (at 60 °C) for power circuit 10 A (at 50 °C) for signalling circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$59.98","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/26cc42c86acf5604976e4bf179465177.pdf","sourceUrl":"https://www.se.com/uk/en/product/LC1K098P7S335/tesys-k-contactor-4p-2no+2nc-690v-20a-ac1-coil-230v-ac-50-60hz/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1K098P7S335/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1K098P7S335","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1K098P7S335 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}