{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC2K12013FE7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC2K12013FE7","canonicalUrl":"https://aoctrl.com/schneider/LC2K12013FE7","factsUrl":"https://aoctrl.com/api/mcp/products/LC2K12013FE7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys K reversing contactor, LC2K12013FE7, 3P, AC-3 <= 440 V 12 A, 1 NC, 115 V AC coil, preassembled with reversing power busbar.","salesMarkdown":"Rated AC-3 at 12 A up to 440 V, it handles reversing motor loads like conveyors, hoists, or pump direction changes. The 115 V AC coil and one NC auxiliary contact are built in; the contactor snaps onto a DIN rail inside a control panel (IP20 finger-safe per VDE 0106). The AC-3 rating of 12 A at <= 440 V is the motor-switching current — this is the number that decides whether the contactor can start and stop a given induction motor under load. AC-4 covers plugging and inching duty (higher wear). The 115 V AC coil means the control transformer or PLC output must supply 115 VAC; verify the control voltage matches your panel design. The 1 NC auxiliary gives one normally-closed feedback contact for status or interlock. Dimensions are 90 mm wide, 58 mm high, 57 mm deep — compact enough for a crowded DIN-rail row. Ambient operating range is -25 to 50 °C, storage -50 to 80 °C. Altitude derating starts above 2000 m.","metaTitle":"Schneider TeSys K LC2K12013FE7 Reversing Contactor, 12 A AC-","metaDescription":"Schneider TeSys K reversing contactor LC2K12013FE7, 3P, AC-3 12 A at 440 V, 115 VAC coil, 1 NC auxiliary. Obsolete — sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"57 mm","Range":"TeSys","Width":"90 mm","Height":"58 mm","Product name":"TeSys K","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102","Device short name":"LC2K","Poles description":"3P","Device application":"Control","Operating altitude":"2000 m without derating","Device presentation":"Preassembled with reversing power busbar","Protective treatment":"TC conforming to IEC 60068 TC conforming to DIN 50016","Utilisation category":"AC-1 AC-4 AC-3","Contactor application":"Resistive load Motor control","Mechanical robustness":"Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6","IP degree of protection":"IP20 conforming to VDE 0106","Product or component type":"Reversing contactor","Power Pole Contact Composition":"3 NO","[Ue] rated operational voltage":"Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit","Ambient air temperature for storage":"-50...80 °C","Ambient air temperature for operation":"-25...50 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1ae39866fa1e7221af66ffe51cb89956.pdf","sourceUrl":"https://www.se.com/ie/en/product/LC2K12013FE7/tesys-k-reversing-contactor-3p-ac3-440-v-12-a-1-nc-115-v-ac-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC2K12013FE7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings of the LC2K12013FE7?","answer":"It is a 3-pole reversing contactor rated AC-3 at 12 A up to 440 V, with a 115 V AC coil and one NC auxiliary contact. It is preassembled with a reversing power busbar and mounts on DIN rail with IP20 protection."},{"question":"What is the depth of the LC2K12013FE7?","answer":"The depth is 57 mm."},{"question":"What series does the LC2K12013FE7 belong to?","answer":"It is part of the Schneider TeSys K range of contactors."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC2K12013FE7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC2K12013FE7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}