{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LE4D25E7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LE4D25E7","canonicalUrl":"https://aoctrl.com/schneider/LE4D25E7","factsUrl":"https://aoctrl.com/api/mcp/products/LE4D25E7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys LE, enclosed DOL starter, LE4D25E7, 25 A, 48 V AC coil, IP65, polycarbonate enclosure.","salesMarkdown":"The LE4D25E7 is a TeSys LE enclosed direct-on-line starter from Schneider Electric, rated 25 A conventional free-air thermal current with a 48 V AC 50/60 Hz control coil. It is designed for standard industrial environments, switching motor loads up to 11 kW at 380/400/415/440 V AC or 15 kW at 500 V AC in AC-3 duty. The polycarbonate enclosure carries IP65 and IK07 ratings, meaning it withstands hose-directed water and low-energy impacts — suitable for standalone mounting near the motor rather than inside a central panel. The 25 A thermal current (Ith) is the continuous current the starter can carry in free air — this governs the conductor sizing and the upstream protection. The AC-3 utilisation category means the starter is rated for starting and stopping squirrel-cage motors, not resistive loads; the motor power table (11 kW at 400 V, 15 kW at 500 V) is the practical selection guide. The 48 V AC control coil is uncommon in modern 24 VDC panels — verify your control voltage before specifying, as a coil mismatch is a common field issue with this generation of starters. ## Deployment context The IP65 polycarbonate enclosure allows this starter to be mounted directly on the machine frame or near the motor in washdown areas, without a separate panel. Cable entries are sized for ISO20, ISO25, ISO32, and ISO40 glands on both top and bottom faces. The unit ships without a thermal overload relay — that is ordered separately and must be specified to complete the motor protection scheme.","metaTitle":"TeSys LE LE4D25E7 Enclosed DOL Starter, 25A, 48V AC","metaDescription":"Obsolete TeSys LE LE4D25E7 enclosed DOL starter, 25A, 48V AC coil, IP65. Sourced to order against RFQ. IEC 60947-4-1, AC-3 utilisation.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Overload Relays"],"specifications":{"Depth":"175.5 mm","Range":"TeSys","Width":"186 mm","Height":"330 mm","Material":"Polycarbonate","Standards":"IEC 60947-4-1","Control type":"Push-button start green I Push-button stop/reset red O","Product name":"TeSys LE","Motor power kW":"11 kW at 380/400 V AC 50/60 Hz 11 kW at 415 V AC 50/60 Hz 11 kW at 440 V AC 50/60 Hz 15 kW at 500 V AC 50/60 Hz 5.5 kW at 220/230 V AC 50/60 Hz","lifecycle_stage":"current","Device short name":"LE4D","Cable entry number":"2 ISO20 top 2 ISO25 top 2 ISO32 top 2 ISO40 top 2 ISO20 bottom 2 ISO25 bottom 2 ISO32 bottom 2 ISO40 bottom","Device application":"Standard","Device composition":"Thermal overload relay ordered separately Contactor Fuse disconnector","Utilisation category":"AC-3","Associated fuse rating":"25 A 10 x 38 mm aM","IK degree of protection":"IK07 conforming to IEC 60529","IP degree of protection":"IP65 conforming to IEC 60529","Product or component type":"Enclosed DOL starter","Environmental characteristic":"Standard environment","[Uc] control circuit voltage":"48 V AC 50/60 Hz","Ambient air temperature for operation":"-5...40 °C","[Ith] Conventional free air thermal current":"25 A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/sg/en/product/LE4D25E7/tesys-le-enclosed-dol-starter-25-a-48-v-ac-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LE4D25E7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this starter?","answer":"25 A conventional free-air thermal current (Ith), 48 V AC 50/60 Hz control coil, AC-3 utilisation category, IP65 protection. Motor power ranges from 5.5 kW at 220/230 V up to 15 kW at 500 V."},{"question":"What compliance standards does this starter meet?","answer":"It is designed to IEC 60947-4-1, the standard for contactors and motor-starters. The enclosure carries IK07 impact protection per IEC 60529."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LE4D25E7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LE4D25E7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}