{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LE4K065M7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LE4K065M7","canonicalUrl":"https://aoctrl.com/schneider/LE4K065M7","factsUrl":"https://aoctrl.com/api/mcp/products/LE4K065M7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys LE series, LE4K065M7, enclosed DOL starter, 6 A conventional free-air thermal current, 220 V AC 50/60 Hz control coil, IP65, polycarbonate enclosure.","salesMarkdown":"The Schneider Electric LE4K065M7 is an enclosed direct-on-line (DOL) starter from the TeSys LE range, rated for a conventional free-air thermal current of 6 A and a 220 V AC 50/60 Hz control coil. It is designed to start and stop three-phase induction motors in a standard environment, with motor power ratings of 3 kW at 440 V AC, 2.2 kW at 380/400 V or 415 V AC, and 1.5 kW at 220/230 V AC. The IP65 polycarbonate enclosure (IK09 impact-rated) makes it suitable for washdown or dusty environments — think food processing lines, packaging cells, or outdoor-adjacent installations — without needing a separate panel. For motor duty, the actual operating current is determined by the motor full-load amps, which must be below this figure after accounting for the thermal overload relay (ordered separately). The associated fuse rating is 10 A aM in a 10 x 38 mm cartridge. This is the maximum short-circuit protection the starter is coordinated with. The control circuit runs on 220 V AC 50/60 Hz. If your panel control voltage is different, you will need an interface relay or a different starter variant. Enclosure dimensions are 175 mm wide, 165 mm high, 146 mm deep — compact enough for machine-mounted or wall-mounted installation. Cable entries include multiple ISO20 knockouts plus Pg 13 and Pg 16 ports top and bottom.","metaTitle":"Schneider Electric LE4K065M7 TeSys LE Enclosed DOL Starter,","metaDescription":"Obsolete Schneider Electric LE4K065M7 TeSys LE enclosed DOL starter, 6 A, 220 V AC coil, IP65, IEC 60947-4-1. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Overload Relays"],"specifications":{"Depth":"146 mm","Range":"TeSys","Width":"175 mm","Height":"165 mm","Material":"Polycarbonate","Standards":"IEC 60947-4-1","Control type":"Push-button start green I Push-button stop/reset red O","Product name":"TeSys LE","Motor power kW":"3 kW at 440 V AC 50/60 Hz 1.5 kW at 220/230 V AC 50/60 Hz 2.2 kW at 380/400 V AC 50/60 Hz 2.2 kW at 415 V AC 50/60 Hz","lifecycle_stage":"current","Device short name":"LE4K","Cable entry number":"4 ISO20 top 4 2 Pg 13 + 2 Pg 16 top 4 ISO20 bottom 4 2 Pg 13 + 2 Pg 16 bottom","Device application":"Standard","Device composition":"Thermal overload relay ordered separately Contactor Fuse disconnector","Utilisation category":"AC-3","Associated fuse rating":"10 A 10 x 38 mm aM","IK degree of protection":"IK09 conforming to IEC 60529","IP degree of protection":"IP65 conforming to IEC 60529","Product or component type":"Enclosed DOL starter","Environmental characteristic":"Standard environment","[Uc] control circuit voltage":"220 V AC 50/60 Hz","Ambient air temperature for operation":"-5...40 °C","[Ith] Conventional free air thermal current":"6 A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/58afa2bfb45dc6261ebe3f64750df642.pdf","sourceUrl":"https://www.se.com/sg/en/product/LE4K065M7/tesys-le-enclosed-dol-starter-6-a-220-v-ac-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LE4K065M7/alternatives.json"},"ai":{"faq":[{"question":"What is the closest replacement for the LE4K065M7?","answer":"There is no direct pin-compatible or form-fit-function successor listed in the official documentation. For new designs, consider migrating to the current TeSys island or TeSys Deca enclosed starter ranges, but verify enclosure dimensions, wiring, and ratings against your application."},{"question":"What compliance standards does the LE4K065M7 meet?","answer":"The LE4K065M7 complies with IEC 60947-4-1 for contactors and motor-starters. The enclosure is rated IP65 per IEC 60529 and IK09 per IEC 60529 for impact resistance. The material is polycarbonate."},{"question":"What motor power can the LE4K065M7 handle?","answer":"It is rated for 3 kW at 440 V AC, 2.2 kW at 380/400 V AC or 415 V AC, and 1.5 kW at 220/230 V AC, all at 50/60 Hz, in AC-3 duty."},{"question":"Does the LE4K065M7 include a thermal overload relay?","answer":"No, the thermal overload relay is ordered separately. The starter is a combination of a contactor and fuse disconnector in an enclosure, with the overload relay as a separate component to be added."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LE4K065M7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LE4K065M7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}