{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LP1D40004GD","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LP1D40004GD","canonicalUrl":"https://aoctrl.com/schneider/LP1D40004GD","factsUrl":"https://aoctrl.com/api/mcp/products/LP1D40004GD","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys Deca LP1D40004GD, 4-pole contactor, AC-1 60 A at 440 V, coil 125 V DC.","salesMarkdown":"The Schneider Electric LP1D40004GD is a 4-pole contactor from the TeSys Deca range, rated for resistive loads at 60 A in AC-1 utilisation category at 440 V, with a 125 V DC coil. It's built to switch power circuits in industrial control panels, handling motor starting (AC-3, AC-3e) and resistive heating loads (AC-1) up to its rated operational voltage. The contactor carries approvals to IEC 60947-4-1, EN 60947-4-1, BS 5424, NF C 63-110, JEM 1038, and VDE 0660, giving it broad acceptance across European and Asian markets. If you're maintaining an existing panel that uses this contactor, the 4-pole form factor and 125 VDC coil voltage are the critical fit parameters to match when evaluating a replacement. The TeSys Deca series had a long production run, so a parametric cross-reference within the same family is possible, but no official replacement code is published. The AC-1 rating of 60 A at 440 V governs resistive loads like heaters or lighting — that's the current the contactor can make and break without arc damage. For motor duty, the AC-3 and AC-3e categories apply, which derate the current for inductive starting. The 4-pole configuration (4P) means it switches all four poles simultaneously, with a non-overlap time of 1.5 ms between NC and NO contacts on both energisation and de-energisation — important for interlocking circuits that must avoid a make-before-break condition. The contactor mounts to a plate or DIN rail, with dimensions of 182 mm depth, 85 mm width, and 127 mm height. It's rated IP2X for finger protection, so it's intended for installation inside an enclosure, not exposed to washdown. Operating altitude goes to 3000 m without derating, which covers most high-elevation plant sites. Mechanical robustness is specified for shock and vibration: the contactor withstands 8 Gn for 11 ms when open, 10 Gn for 11 ms when closed, and vibration up to 4 Gn from 5 to 300 Hz in the closed position. This makes it suitable for installation on machinery or conveyors with moderate vibration levels.","metaTitle":"TeSys LP1D40004GD Contactor, 4-Pole, 60 A AC-1, 125 VDC Coil","metaDescription":"Obsolete TeSys Deca LP1D40004GD 4-pole contactor, 60 A AC-1 at 440 V, 125 VDC coil. Sourced to order against RFQ. IEC/EN 60947-4-1. 182 mm depth.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"182 mm","Width":"85 mm","Height":"127 mm","Standards":"NF C 63-110 EN 60947-4-1 BS 5424 IEC 60947-4-1 IEC 60947-1 EN 60947-1 JEM 1038 VDE 0660","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94","Mounting support":"Plate Rail","Non-overlap time":"1.5 ms on de-energisation between NC and NO contacts 1.5 ms on energisation between NC and NO contacts","Range of product":"TeSys Deca","Device short name":"LP1D","Poles description":"4P","Operating altitude":"3000 m without derating","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1 AC-3 AC-3e AC-4","Contactor application":"Resistive load","Mechanical robustness":"Shocks contactor open (8 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms) Vibrations contactor opened (2 Gn, 5...300 Hz) Vibrations contactor closed (4 Gn, 5...300 Hz)","IP degree of protection":"IP2X conforming to IEC 60529 IP2X conforming to VDE 0106","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-5...60 °C -40...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5f6287eeef40f084ba706089b945791d.pdf","sourceUrl":"https://www.se.com/au/en/product/LP1D40004GD/contactor-tesys-lp1d-4-poles-ac1-440v-60-a-coil-125-v-dc/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LP1D40004GD/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings of the LP1D40004GD?","answer":"It is a 4-pole contactor rated 60 A in AC-1 utilisation category at 440 V, with a 125 V DC coil. It handles AC-3, AC-3e, and AC-4 motor duty categories and meets IEC 60947-4-1 standards."},{"question":"What is the physical size of the LP1D40004GD?","answer":"The contactor measures 182 mm depth, 85 mm width, and 127 mm height. It mounts to a plate or DIN rail."},{"question":"What compliance standards does the LP1D40004GD meet?","answer":"It complies with IEC 60947-4-1, EN 60947-4-1, BS 5424, NF C 63-110, JEM 1038, and VDE 0660. It also has TH protective treatment for pollution degree 3 and V1 flame retardance per UL 94."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LP1D40004GD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LP1D40004GD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}