{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LP1D65008DW","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LP1D65008DW","canonicalUrl":"https://aoctrl.com/schneider/LP1D65008DW","factsUrl":"https://aoctrl.com/api/mcp/products/LP1D65008DW","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys D contactor, LP1D65008DW, 4-pole (2NO+2NC), AC-1 rated 80 A at 440 V, DC wide-range coil, screw clamp terminals.","salesMarkdown":"The Schneider LP1D65008DW is a TeSys D 4-pole contactor with a 2 NO + 2 NC pole configuration, rated for AC-1 resistive loads up to 80 A at 440 V. That AC-1 rating means it's designed for switching resistive heater banks, lighting, or transformer primaries where inrush is low — not motor starting (that would be AC-3). The DC wide-range control coil includes a built-in bidirectional peak limiting diode suppressor, so you don't need to add external flyback suppression on the control side. The 80 A AC-1 thermal current (Ith) at 50 Hz gives the continuous current-carrying capacity of the power circuit — use this for sizing the main conductors and the upstream fuse (associated fuse rating is 125 A gG for type 2 coordination). The rated breaking and making capacity is 1000 A at 440 V, so it can interrupt a fault or close into a shorted load within its coordination limits. Mechanical durability is 6 million cycles; electrical durability is 1.4 million cycles at 80 A AC-1 under 440 V — that's a solid lifespan for a resistive-load machine. The footprint is 5 in (127 mm) high, 3.3 in (85 mm) wide, and 7.2 in (182 mm) deep — that depth matters when you're laying out a shallow enclosure; check the door clearance if the contactor is mounted near the hinge side. Control circuit terminals take up to 4 mm², torqued to 1.7 N·m.","metaTitle":"Schneider LP1D65008DW TeSys D Contactor, 4P 2NO+2NC, AC-1 80","metaDescription":"Schneider LP1D65008DW TeSys D contactor, 4-pole, 2NO+2NC, AC-1 rated 80A at 440V. Current production. UL/CSA/IEC. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"7.2 in (182 mm)","Range":"TeSys","Width":"3.3 in (85 mm)","title":"LP1D65008DW","Height":"5 in (127 mm)","Category":"22357-CTR,TESYS D,OPEN,40-65A AC","Standards":"CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508","description":"TeSys D contactor - 4P(2 NO + 2 NC) - AC-1 - <= 440 V 80 A - 96 V DC coil","Time constant":"75 ms","Operating time":"4...19 ms opening 12...26 ms closing","Coil technology":"Built-in bidirectional peak limiting diode suppressor","Fire resistance":"1562 °F (850 °C) IEC 60695-2-1","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94","Mounting Support":"Plate Rail","Pollution degree":"3","Protective cover":"Without","Range of Product":"TeSys D","Average impedance":"1.5 mOhm - Ith 80 A 50 Hz for power circuit","Device short name":"LP1D","Inrush power in W":"22 W 68 °F (20 °C))","Poles description":"4P","Tightening torque":"Power circuit 70.8 lbf.in (8 N.m) screw clamp terminals 0.04...0.05 in² (25...35 mm²) hexagonal 0.2 in (4 mm) Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 44.3 lbf.in (5 N.m) screw clamp terminals 0.002...0.04 in² (1...25 mm²) hexagonal 0.2 in (4 mm)","Compatibility code":"LP1D","Operating altitude":"0...9842.52 ft (0...3000 m)","Control circuit type":"DC wide range","Overvoltage category":"III","Utilisation category":"AC-1","Contactor application":"Resistive load","Electrical durability":"1.4 Mcycles 80 A AC-1 <= 440 V","Mechanical durability":"6 Mcycles","Mechanical robustness":"Vibrations contactor open 2 Gn, 5...300 Hz) Vibrations contactor closed 4 Gn, 5...300 Hz) Shocks contactor open 10 Gn for 11 ms) Shocks contactor closed 15 Gn for 11 ms)","Nbr. of units in pkg.":"1","Associated fuse rating":"125 A gG at 125 A gG at <= 690 V coordination type 2 for power circuit","Maximum operating rate":"3600 cyc/h 140 °F (60 °C)","Connections - terminals":"Power circuit: screw clamp terminals 1 0.002...0.05 in² (1...35 mm²) - cable stiffness: flexible without cable end Power circuit: screw clamp terminals 2 0.002...0.04 in² (1...25 mm²) - cable stiffness: flexible without cable end Power circuit: screw clamp terminals 1 0.002...0.05 in² (1...35 mm²) - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 2 0.002...0.04 in² (1...25 mm²) - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 1 0.002...0.05 in² (1...35 mm²) - cable stiffness: solid Power circuit: screw clamp terminals 2 0.002...0.04 in² (1...25 mm²) - cable stiffness: solid Control circuit: screw clamp terminals 1 0.002...0.006 in² (1...4 mm²) - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 1 0.002...0.006 in² (1...4 mm²) - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 2 0.002...0.004 in² (1...2.5 mm²) - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 0.002...0.006 in² (1...4 mm²) - cable stiffness: solid Control circuit: screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) - cable stiffness: solid","IP degree of protection":"IP20 front face IEC 60529","Rated breaking capacity":"1000 A at 440 V for power circuit conforming to IEC 60947","Pole contact composition":"2 NO + 2 NC","Safety reliability level":"B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1","Product or Component Type":"Contactor","Irms rated making capacity":"1000 A at 440 V for power circuit conforming to IEC 60947","Power dissipation per pole":"9.6 W AC-1","[Uc] control circuit voltage":"96 V DC","[Ui] rated insulation voltage":"Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL","Control circuit voltage limits":"0.1...0.3 Uc (-40...158 °F (-40...70 °C)):drop-out DC 0.75...1.2 Uc (-40...131 °F (-40...55 °C)):operational DC 1...1.2 Uc (131...158 °F (55...70 °C)):operational DC","Hold-in power consumption in W":"22 W 68 °F (20 °C)","[Ie] rated operational current":"80 A (at <140 °F (60 °C)) at <= 440 V AC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit Power circuit <= 300 V DC","[Uimp] rated impulse withstand voltage":"6 kV IEC 60947","[Icw] rated short-time withstand current":"110 A 104 °F (40 °C) - 10 min for power circuit 260 A 104 °F (40 °C) - 1 min for power circuit 520 A 104 °F (40 °C) - 10 s for power circuit 900 A 104 °F (40 °C) - 1 s for power circuit","[Ith] conventional free air thermal current":"80 A (at 140 °F (60 °C)) for power circuit","Permissible ambient air temperature around the device":"-76...176 °F (-60...80 °C) storage -40...140 °F (-40...60 °C) operation 140...158 °F (60...70 °C) with derating"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e9073f1b5ed82c12caa530afc58f9047.pdf","sourceUrl":"https://www.se.com/ie/en/product/LP1D65008DW/tesys-d-contactor-4p2-no-+-2-nc-ac1-440-v-80-a-96-v-dc-coil/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative in the TeSys D family?","answer":"The TeSys D family includes many 4-pole contactors with the same footprint and terminal layout. The deciding factor is the AC-1 current rating and coil voltage — the LP1D65008DW is a 80 A AC-1, DC coil variant. A lower or higher current rating in the same family (e.g., LP1D12 or LP1D80) would share the same mounting and wiring pattern but differ in thermal capacity."},{"question":"What compliance documentation does Schneider provide for this part?","answer":"The part is listed to UL 508, CSA C22.2 No 14, IEC 60947-4-1, and IEC 60947-5-1. Fire resistance is rated at 1562 °F (850 °C) per IEC 60695-2-1, and the enclosure material is V-1 per UL 94. Pollution degree 3 (industrial environment). Standard Schneider declarations for RoHS and REACH are available through their documentation portal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LP1D65008DW","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LP1D65008DW when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}