{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LP1K09008MPD","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LP1K09008MPD","canonicalUrl":"https://aoctrl.com/schneider/LP1K09008MPD","factsUrl":"https://aoctrl.com/api/mcp/products/LP1K09008MPD","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys K contactor, LP1K09008MPD, 4-pole (2 NO + 2 NC), AC-1 rated 20 A at 690 V, 230 V DC coil, active production.","salesMarkdown":"That's not a motor rating — for motor switching you'd need the AC-3 duty class, which this part doesn't list. The 690 V insulation voltage (Ui) and 8 kV impulse withstand (Uimp) put it solidly in IEC 60947-4-1 territory for industrial control panels. ## Deployment context The 58 mm height and 45 mm width leave room for finger-duct and wiring around it. Coil energization takes 30–40 ms to close the NO contacts, 10 ms to open them on de-energization — fast enough for most sequencing but not for high-speed cycling; the maximum operating rate is 3600 cycles per hour. The 3 W hold-in power means the coil driver doesn't need oversized DC supplies. Screw-clamp terminals accept up to a certain wire gauge; tighten to 1.3 N·m using a #2 Philips or 6 mm flat-blade screwdriver. The power circuit impedance is 3 mΩ at 20 A, 50 Hz — low enough to keep voltage drop negligible in a control panel. Operating temperature range is -25 to 50 °C, storage from -50 to 80 °C, and it works at altitudes up to 2000 m without derating.","metaTitle":"Schneider Electric LP1K09008MPD TeSys K Contactor, 4P 20A AC","metaDescription":"Schneider Electric LP1K09008MPD TeSys K contactor, 4-pole (2 NO + 2 NC), rated 20 A at 690 V AC in AC-1, 230 V DC coil. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"57 mm","Range":"TeSys","Width":"45 mm","Height":"58 mm","Standards":"EN/IEC 60947-4-1 GB/T 14048.4 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1","Operating time":"30...40 ms coil energisation and NO closing 10 ms coil de-energisation and NO opening 25...35 ms coil energisation and NC opening 15 ms coil de-energisation and NC closing","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102","Mounting support":"Rail Plate","Range of product":"TeSys K","Average impedance":"3 mOhm - Ith 20 A 50 Hz for power circuit","Device short name":"LP1K","Inrush power in W":"3 W (at 20 °C)","Poles description":"4P","Tightening torque":"1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 1.3 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm","Compatibility code":"LP1K","Operating altitude":"2000 m without derating","Overvoltage category":"III","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"25 A gG at 25 A aM for power circuit","Maximum operating rate":"3600 cyc/h","Rated breaking capacity":"110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947","Pole contact composition":"2 NO + 2 NC","Safety reliability level":"B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1","Product or component type":"Contactor","Irms rated making capacity":"110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947","[Ui] rated insulation voltage":"Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Power circuit: 600 V conforming to CSA C22.2 No 14","Control circuit voltage limits":"Operational: 0.8...1.15 Uc (at Drop-out: 0.1...0.75 Uc (at <50 °C)","Hold-in power consumption in W":"3 W at 20 °C","[Ie] rated operational current":"20 A (at 16 A (at <70 °C) at 690 V AC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: 690 V AC 50/60 Hz","Ambient air temperature for storage":"-50...80 °C","Ambient air temperature for operation":"-25...50 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Ith] conventional free air thermal current":"20 A (at 50 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/in/en/product/LP1K09008MPD/tesys-k-contactor-4p-2-no-+-2-nc-ac1-440v-20a-230v-dc-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LP1K09008MPD/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to LP1K09008MPD in the TeSys K family?","answer":"The closest pin-compatible alternative within the TeSys K range would be a variant with the same pole configuration (4P, 2 NO + 2 NC) but a different coil voltage. For example, an LP1K09008BD with a 24 V DC coil shares the same contactor body and ratings, only the coil changes. The mechanical and electrical ratings remain identical."},{"question":"What compliance documentation does Schneider provide for LP1K09008MPD?","answer":"Schneider Electric provides a declaration of conformity to EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, GB/T 14048.4, and JIS C8201-4-1. The part is UL 94 V-0 flame rated and meets NF F 16-101/102 railway fire requirements. RoHS and REACH compliance documentation is available through Schneider's product documentation portal."},{"question":"What is the depth of LP1K09008MPD?","answer":"The LP1K09008MPD has a depth of 57 mm, width of 45 mm, and height of 58 mm. This compact footprint fits standard DIN-rail enclosures and leaves room for wiring duct."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LP1K09008MPD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LP1K09008MPD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}