{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LP1K0901ND","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LP1K0901ND","canonicalUrl":"https://aoctrl.com/schneider/LP1K0901ND","factsUrl":"https://aoctrl.com/api/mcp/products/LP1K0901ND","rawCanonicalId":null},"summary":{"shortDescription":"Schneider LP1K0901ND Tesys K Contactors — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.","salesMarkdown":"## Overview It carries certification to EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, CCC, and EAC, and is rated IP2X for in-cabinet mounting on DIN rail or plate. The contactor switches three power poles for resistive or motor loads up to 9 A in AC-3 duty. The 60 V DC coil draws 3 W steady-state and operates without a built-in suppressor; an external flyback diode or RC snubber must be added across the coil for DC switching. The single NC auxiliary provides status feedback or interlocking. Screw terminals accept 1.5–4 mm² solid or stranded wire; torque to 7.08 N·m. ## Applications TeSys K contactors of this size are used in motor starting, lighting, and resistive heating circuits inside control panels, packaging machinery, conveyors, and HVAC equipment where a compact 3-pole block is needed. ## Compliance & certifications The LP1K0901ND holds UL, CSA, CCC, EAC, and CE marks, with design verification to EN/IEC 60947-4-1 and EN/IEC 60947-5-1. Flammability rating V1 per UL 94. The TeSys K series is an established Schneider line; the LP1K0901ND remains in active production. Electrical endurance is rated 1.3 million cycles at 9 A AC-3, mechanical life 10 million cycles.","metaTitle":"Schneider LP1K0901ND TeSys K Contactor, 3P, 9A, 60V DC Coil","metaDescription":"Schneider TeSys K LP1K0901ND contactor: 3 poles, AC-3/AC-3e 9A, 60V DC coil, 1 NC aux, IP2X. UL/CSA/CCC certified. DIN-rail or plate mount.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Depth":"2.2 in (57 mm)","Range":"TeSys","Width":"1.8 in (45 mm)","Height":"2.3 in (58 mm)","Category":"22321-CTR,K-LINE,DC,OPEN,NONREV","Standards":"EN/IEC 60947-4-1 EN/IEC 60947-5-1 UL 60947-4-1 UL 60947-5-1 CSA C22.2 No 60947-4-1 CSA C22.2 No 60947-5-1 GB/T 14048.4","Operating time":"30...40 ms coil energisation and NO closing 10 ms coil de-energisation and NO opening","Coil technology":"Without built-in suppressor module","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102","Heat dissipation":"1.3 W","Mounting Support":"Rail Plate","Device short name":"LP1K","Inrush power in W":"3 W 68 °F (20 °C))","Poles description":"3P","Tightening torque":"7.08...11.5 lbf.in (0.8...1.3 N.m) screw clamp terminals Philips No 2 7.08...11.5 lbf.in (0.8...1.3 N.m) screw clamp terminals flat Ø 6 mm 7.08...11.5 lbf.in (0.8...1.3 N.m) screw clamp terminals pozidriv No 2","Operating altitude":"6561.68 ft (2000 m) without derating","Utilisation category":"AC-3 AC-3e AC-1 AC-4","Contactor application":"Resistive load Motor control","Electrical durability":"1.3 Mcycles 9 A AC-3 1.3 Mcycles 9 A AC-3e 0.16 Mcycles 20 A AC-1 0.02 Mcycles 54 A AC-4 <= 440 V","Mechanical durability":"10 Mcycles","Nbr. of units in pkg.":"1","Maximum operating rate":"3600 cyc/h","Auxiliary contacts type":"Instantaneous 1 NC","Connections - terminals":"screw clamp terminals 1 0.002...0.006 in² (1.5...4 mm²)solid screw clamp terminals 1 0.001...0.006 in² (0.75...4 mm²)flexible without cable end screw clamp terminals 1 0.0005...0.004 in² (0.34...2.5 mm²)flexible with cable end screw clamp terminals 2 0.002...0.006 in² (1.5...4 mm²)solid screw clamp terminals 2 0.001...0.006 in² (0.75...4 mm²)flexible without cable end screw clamp terminals 2 0.0005...0.002 in² (0.34...1.5 mm²)flexible with cable end Power circuit screw clamp terminals 2 0.002 in² (1.5 mm²)flexible with cable end","IP degree of protection":"IP2X","Safety reliability level":"B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1","Minimum switching current":"5 mA for signalling circuit","Minimum switching voltage":"17 V for signalling circuit","Product or Component Type":"Contactor","Control circuit voltage limits":"Operational: 0.8...1.15 Uc (at Drop-out: >= 0.10 Uc (at <122 °F (50 °C))","Hold-in power consumption in W":"3 W 68 °F (20 °C)","Power Pole Contact Composition":"3 NO","[Ue] rated operational voltage":"Power circuit Signalling circuit 10 MOhm for signalling circuit","Ambient Air Temperature for Storage":"-58...176 °F (-50...80 °C)","Ambient air temperature for operation":"-13...122 °F (-25...50 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$51.35","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/18ee49dc82cc5ff8d55ed8674e71e4dc.pdf","sourceUrl":"https://www.se.com/ie/en/product/LP1K0901ND/contactor-tesys-k-3p-ac3-ac3e-440v-9a-aux-1nc-60v-dc-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LP1K0901ND/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LP1K0901ND","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LP1K0901ND when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}