{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LP1K12004FD","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LP1K12004FD","canonicalUrl":"https://aoctrl.com/schneider/LP1K12004FD","factsUrl":"https://aoctrl.com/api/mcp/products/LP1K12004FD","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys LP1K series, 4-pole contactor LP1K12004FD, 20 A AC-1, 110 VDC coil, screw clamp terminals.","salesMarkdown":"The Schneider Electric TeSys LP1K12004FD is a 4-pole contactor with a 110 V DC coil, rated for 20 A in AC-1 utilisation category (resistive loads) up to 690 V. The 4 NO power poles give you four independent switching paths, so it handles single-phase or three-phase resistive loads with a spare pole for a neutral or auxiliary circuit. At 45 mm wide, 58 mm tall, and 57 mm deep, it takes up a standard 4-module footprint on the rail — that's another SKU that fits the same slot as the rest of the TeSys LP1K family. Screw-clamp terminals accept 1.5 to 4 mm² solid or stranded, with a tightening torque of 0.8 to 1.3 N·m. IP2X means finger-safe but not washdown-rated; keep it inside the enclosure. ## What the approvals tell you Certified to EN/IEC 60947-4-1 and -5-1, plus UL 60947-4-1 and -5-1, and CSA C22.2 No 60947-4-1 and -5-1. That covers both power switching and control-circuit duty across IEC and North American jurisdictions. Also carries GB/T 14048.4 for the Chinese market. Flame retardance is V-0 per UL 94.","metaTitle":"Schneider TeSys LP1K12004FD Contactor, 4P, 20A AC-1, 110 VDC","metaDescription":"Schneider TeSys LP1K12004FD 4-pole contactor, 20 A rated operational current (AC-1), 110 VDC coil. Current production. Sourced to order. UL/CSA/IEC certified.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"57 mm","Range":"TeSys","Width":"45 mm","title":"LP1K12004FD","Height":"58 mm","Standards":"EN/IEC 60947-4-1 EN/IEC 60947-5-1 UL 60947-4-1 UL 60947-5-1 CSA C22.2 No 60947-4-1 CSA C22.2 No 60947-5-1 GB/T 14048.4","description":"contactor, TeSys K, 4P(4NO),AC-1, 440V, 20A, 110V DC coil","Operating time":"30...40 ms coil energisation and NO closing 10 ms coil de-energisation and NO opening","Coil technology":"Without built-in suppressor module","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102","Heat dissipation":"1.3 W","Mounting support":"Rail Plate","Average impedance":"3 mOhm - Ith 20 A 50 Hz for power circuit","Device short name":"LP1K","Inrush power in W":"3 W (at 20 °C)","Poles description":"4P","Tightening torque":"0.8...1.3 N.m - on screw clamp terminals Philips No 2 0.8...1.3 N.m - on screw clamp terminals flat Ø 6 mm 0.8...1.3 N.m - on screw clamp terminals pozidriv No 2","Operating altitude":"2000 m without derating","Control circuit type":"DC standard","Overvoltage category":"III","Utilisation category":"AC-1","Contactor application":"Resistive load","Electrical durability":"0.3 Mcycles 20 A AC-1 at Ue <= 690 V","Mechanical durability":"10 Mcycles","Associated fuse rating":"25 A gG at 25 A aM for power circuit","Maximum operating rate":"3600 cyc/h","Connections - terminals":"Screw clamp terminals 1 cable(s) 1.5...4 mm²solid Screw clamp terminals 1 cable(s) 0.75...4 mm²flexible without cable end Screw clamp terminals 1 cable(s) 0.34...2.5 mm²flexible with cable end Screw clamp terminals 2 cable(s) 1.5...4 mm²solid Screw clamp terminals 2 cable(s) 0.75...4 mm²flexible without cable end Screw clamp terminals 2 cable(s) 0.34...1.5 mm²flexible with cable end Power circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end","IP degree of protection":"IP2X","Rated breaking capacity":"110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947","Safety reliability level":"B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1","Product or component type":"Contactor","Irms rated making capacity":"144 A AC for power circuit conforming to IEC 60947","[Uc] control circuit voltage":"110 V DC","[Ui] rated insulation voltage":"Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Power circuit: 600 V conforming to CSA C22.2 No 14","Control circuit voltage limits":"Operational: 0.8...1.15 Uc (at Drop-out: >= 0.10 Uc (at <50 °C)","Hold-in power consumption in W":"3 W at 20 °C","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"20 A (at <60 °C) at <= 690 V AC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: Signalling circuit: <= 690 V AC <= 400 Hz","Ambient air temperature for storage":"-50...80 °C","Ambient air temperature for operation":"-25...50 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"115 A 50 °C - 1 s for power circuit 105 A 50 °C - 5 s for power circuit 100 A 50 °C - 10 s for power circuit 75 A 50 °C - 30 s for power circuit 55 A 50 °C - 1 min for power circuit 50 A 50 °C - 3 min for power circuit 25 A 50 °C - >= 15 min for power circuit","[Ith] conventional free air thermal current":"20 A (at 60 °C) for power circuit 10 A (at 50 °C) for signalling circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fb78f76744dfd32c21cf91c274c78327.pdf","sourceUrl":"https://www.se.com/vn/en/product/LP1K12004FD/contactor-tesys-k-4p4noac1-440v-20a-110v-dc-coil/"},"ai":{"faq":[{"question":"What is the closest alternative to this contactor in the TeSys family?","answer":"Within the same LP1K frame size, the closest sibling would be a variant with a different coil voltage — for example, a 24 V DC or 48 V DC coil version of the same 4-pole 20 A contactor. The mechanical footprint, terminal layout, and pole configuration are identical; only the control circuit voltage changes. If you need a different coil voltage, that's the swap. There is no pin-compatible substitute outside the LP1K series without rewiring."},{"question":"What is the depth of the LP1K12004FD?","answer":"57 mm. That's the dimension from the mounting surface to the front of the contactor body, not including any add-on auxiliary contact blocks or suppressor modules."},{"question":"What compliance documentation does Schneider provide for this part?","answer":"The contactor carries UL, CSA, and CE marks per the standards listed: UL 60947-4-1, UL 60947-5-1, CSA C22.2 No 60947-4-1, CSA C22.2 No 60947-5-1, EN/IEC 60947-4-1, and EN/IEC 60947-5-1. It also meets GB/T 14048.4 for China. Flame retardance is V-0 per UL 94. RoHS and REACH declarations are standard Schneider documentation available on request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LP1K12004FD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LP1K12004FD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}