{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LP1K12004MPD","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LP1K12004MPD","canonicalUrl":"https://aoctrl.com/schneider/LP1K12004MPD","factsUrl":"https://aoctrl.com/api/mcp/products/LP1K12004MPD","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys K contactor, LP1K12004MPD, 4P (4 NO), AC-1 rated 20 A at ≤440 V, 230 V DC coil.","salesMarkdown":"The Schneider Electric LP1K12004MPD is a TeSys K contactor with 4 normally-open poles, rated for 20 A in AC-1 utilisation category (resistive loads) at up to 690 V AC 50/60 Hz. The 230 V DC coil draws a 3 W hold-in power at 20 °C, with an inrush of 3 W at the same temperature. This is a compact 4-pole contactor — 45 mm wide, 58 mm tall, 57 mm deep — designed for rail or plate mounting in control panels. The AC-1 rating of 20 A at 690 V means it is sized for resistive loads like heaters or lighting banks; it is not rated for motor duty (AC-3) in this variant. The 4 NO pole configuration gives you four independent normally-open switching paths, each rated for the same 20 A — useful for switching multiple resistive circuits simultaneously or for single-phase load grouping. The 230 V DC coil has an operational range of 0.8 to 1.15 times the control voltage, with dropout between 0.1 and 0.75 Uc below 50 °C — so the coil holds reliably at 184 V DC minimum and drops out cleanly below 172.5 V DC. The LP1K12004MPD carries approvals under EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, GB/T 14048.4, and JIS C8201-4-1. The rated insulation voltage is 690 V per IEC 60947-4-1 and 600 V per UL 508 / CSA C22.2 No 14. The impulse withstand voltage is 8 kV, overvoltage category III. Flame retardance is V1 per UL 94, and it meets Requirement 2 of NF F 16-101 and NF F 16-102 for rail-vehicle fire behaviour. The safety reliability is quantified: B10d of 1,369,863 cycles under nominal resistive load and 20,000,000 cycles under mechanical load per EN/ISO 13849-1.","metaTitle":"LP1K12004MPD TeSys K Contactor, 4P 4NO, 20A AC-1, 230V DC Co","metaDescription":"Obsolete TeSys K contactor, 4P (4NO), 20A AC-1 at 690V, 230V DC coil. Sourced to order against RFQ. UL, CSA, IEC 60947-4-1 certified.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"57 mm","Range":"TeSys","Width":"45 mm","Height":"58 mm","Standards":"EN/IEC 60947-4-1 GB/T 14048.4 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1","Operating time":"30...40 ms coil energisation and NO closing 10 ms coil de-energisation and NO opening","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102","Mounting support":"Rail Plate","Range of product":"TeSys K","Average impedance":"3 mOhm - Ith 20 A 50 Hz for power circuit","Device short name":"LP1K","Inrush power in W":"3 W (at 20 °C)","Poles description":"4P","Tightening torque":"1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 1.3 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm","Compatibility code":"LP1K","Operating altitude":"2000 m without derating","Overvoltage category":"III","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"25 A gG at 25 A aM for power circuit","Maximum operating rate":"3600 cyc/h","Rated breaking capacity":"110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947","Pole contact composition":"4 NO","Safety reliability level":"B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1","Product or component type":"Contactor","Irms rated making capacity":"144 A AC for power circuit conforming to NF C 63-110 144 A AC for power circuit conforming to IEC 60947","[Ui] rated insulation voltage":"Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Power circuit: 600 V conforming to CSA C22.2 No 14","Control circuit voltage limits":"Operational: 0.8...1.15 Uc (at Drop-out: 0.1...0.75 Uc (at <50 °C)","Hold-in power consumption in W":"3 W at 20 °C","[Ie] rated operational current":"20 A (at 16 A (at <70 °C) at 690 V AC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: 690 V AC 50/60 Hz","Ambient air temperature for storage":"-50...80 °C","Ambient air temperature for operation":"-25...50 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Ith] conventional free air thermal current":"20 A (at 50 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d5c556801f40493582aaf84a847089ce.pdf","sourceUrl":"https://www.se.com/ie/en/product/LP1K12004MPD/tesys-k-contactor-4p-4-no-ac1-440v-20a-230v-dc-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LP1K12004MPD/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to LP1K12004MPD in the TeSys family?","answer":"There is no official direct replacement order code from Schneider for this specific 4P 4NO 20A AC-1 230V DC coil variant. A substitution would need to match the pole count (4 NO), coil voltage (230 V DC), and mounting footprint from current TeSys K or TeSys Deca catalog numbers. Send an RFQ with your application details for a cross-reference check."},{"question":"What are the key dimensions of LP1K12004MPD?","answer":"The contactor is 45 mm wide, 58 mm tall, and 57 mm deep. It mounts on a rail or plate."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LP1K12004MPD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LP1K12004MPD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}