{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LP2K1210MD","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LP2K1210MD","canonicalUrl":"https://aoctrl.com/schneider/LP2K1210MD","factsUrl":"https://aoctrl.com/api/mcp/products/LP2K1210MD","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys K reversing contactor, 3P, AC-3 ≤440 V 12 A, 1 NO, 220 V DC coil, IP20, 57 mm depth.","salesMarkdown":"AC-1 (resistive) and AC-4 (inching/plugging) categories are also listed, so the same block covers heater banks or frequent reversing duty if derated. The power circuit is rated for 690 V AC 50/60 Hz, giving headroom on 480 V or 600 V line supplies. IP20 finger protection (VDE 0106) means it is safe for open-panel mounting but not for washdown environments — install inside an enclosure if moisture or dust is present. The 57 mm depth and 90 mm width fit a standard DIN-rail footprint alongside other TeSys K auxiliaries. This reversing contactor is pre-wired with the reversing busbar, so it saves a wiring step during panel build — just land the motor leads and coil control wires. The 220 V DC coil suits battery-backed or DC-switched control circuits common in industrial truck, crane, or solar-pump panels.","metaTitle":"TeSys LP2K1210MD reversing contactor, 3P, AC-3 12 A, 220 V D","metaDescription":"TeSys K LP2K1210MD reversing contactor, 3P, AC-3 ≤440 V 12 A, 1 NO, 220 V DC coil. Active production. IP20. 57 mm deep. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"57 mm","Range":"TeSys","Width":"90 mm","title":"LP2K1210MD","Height":"58 mm","description":"TeSys K reversing contactor, 3P, AC-3 <= 440 V 12 A, 1 NO, 220 V DC coil","Product name":"TeSys K","lifecycle_stage":"current","Flame retardance":"V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102","Device short name":"LP2K","Poles description":"3P","Device application":"Control","Operating altitude":"2000 m without derating","Device presentation":"Preassembled with reversing power busbar","Protective treatment":"TC conforming to IEC 60068 TC conforming to DIN 50016","Utilisation category":"AC-1 AC-3 AC-4","Contactor application":"Resistive load Motor control","Mechanical robustness":"Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27","IP degree of protection":"IP20 conforming to VDE 0106","Product or component type":"Reversing contactor","Power Pole Contact Composition":"3 NO","[Ue] rated operational voltage":"Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit","Ambient air temperature for storage":"-50...80 °C","Ambient air temperature for operation":"-25...50 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a713da64d358bdb78547099bddc6387d.pdf","sourceUrl":"https://www.se.com/ie/en/product/LP2K1210MD/tesys-k-reversing-contactor-3p-ac3-440-v-12-a-1-no-220-v-dc-coil/"},"ai":{"faq":[{"question":"What are the key electrical ratings I need to check for fit?","answer":"The critical rating is AC-3 motor-switching current: 12 A at ≤440 V. The coil is 220 V DC. The power circuit is rated for 690 V AC 50/60 Hz maximum. Utilisation categories also include AC-1 (resistive) and AC-4 (inching/plugging), so derate accordingly for those loads."},{"question":"What is the physical size of this contactor?","answer":"Depth is 57 mm, width 90 mm, height 58 mm. It is IP20 finger-protected and mounts on standard DIN rail within a control panel."},{"question":"What compliance documentation is available for this part?","answer":"The part carries V1 flame retardance per UL 94 and conforms to NF F 16-101/102. Protective treatment conforms to IEC 60068 and DIN 50016. Mechanical robustness is tested to IEC 60068-2-27 (shock) and IEC 60068-2-6 (vibration). IP20 per VDE 0106."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LP2K1210MD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LP2K1210MD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}