{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX0FG012","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX0FG012","canonicalUrl":"https://aoctrl.com/schneider/LX0FG012","factsUrl":"https://aoctrl.com/api/mcp/products/LX0FG012","rawCanonicalId":null},"summary":{"shortDescription":"TeSys F, contactor coil, LX0FG012, 440 V AC 50/60 Hz, 35-40 ms latching, 106.1 Ohm latching coil resistance.","salesMarkdown":"## Contactor Coil for TeSys F — LX0FG012 It's the replacement coil for the corresponding TeSys F contactor frame, meaning if you've got a contactor in that line with a failed or wrong-voltage coil, this is the drop-in swap. Latching time runs 35 to 40 ms; unlatching is slower at 50 to 100 ms — that asymmetry matters when you're timing a sequence or coordinating with a PLC scan cycle. Coil resistance at 20 °C is 106.1 Ohm for the latching winding and 8126 Ohm for the unlatching winding. That's a big ratio — the hold-in current is much lower than the pick-up, which is standard for a dual-winding AC coil, but it means your control transformer sizing needs to cover the inrush, not just the sealed VA. No minimum buy-in required for a single unit, but if you're stocking multiple TeSys F frames, it makes sense to consolidate the coil order with the contactors. ## Mechanical Endurance & Duty Cycle Rated for 1 million mechanical cycles — that's the contactor frame's life, not the coil's alone, but the coil is the wear item. At a maximum operating rate of 120 cycles per hour at 40 °C, you're looking at roughly 8,333 hours of continuous cycling before mechanical end-of-life. For a conveyor line running 10 cycles per minute, that's about 14 days of 24/7 operation — so for high-duty applications, budget a spare.","metaTitle":"TeSys LX0FG012 Contactor Coil, 440 V AC, 50/60 Hz","metaDescription":"Active TeSys F contactor coil, LX0FG012, 440 V AC 50/60 Hz, 35-40 ms latching, 1 Mcycles mechanical durability. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactor & Starter Coils"],"specifications":{"Range":"TeSys","title":"LX0FG012","Category":"22341-CONTACTOR,D,K,&F ACCESS","description":"TeSys F - contactor coil - LX0FG - 440 V AC","Operating time":"35...40 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Device short name":"LX0FG","Average resistance":"106.1 Ohm latching 68 °F (20 °C) 8126 Ohm unlatching 68 °F (20 °C)","Control circuit type":"AC 50/60 Hz","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Product or Component Type":"Contactor coil","[Uc] control circuit voltage":"440 V AC 50/60 Hz","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/88762458fea22cd3f659b0d73daf4262.pdf","sourceUrl":"https://www.se.com/th/en/product/LX0FG012/tesys-f-contactor-coil-lx0fg-440-v-ac/"},"ai":{"faq":[{"question":"What is the control voltage for this coil?","answer":"440 V AC at 50/60 Hz. The latching voltage range is 0.85 to 1.1 times Uc (374 to 484 V AC), and the unlatching range is the same. That's a tight band — ensure your control supply stays within that window, especially under load."},{"question":"What is the mechanical durability of this coil?","answer":"1 million mechanical cycles, with a maximum operating rate of 120 cycles per hour at 40 °C. That's the frame rating, but the coil is the limiting component in practice."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX0FG012","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX0FG012 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}