{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX0FL005","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX0FL005","canonicalUrl":"https://aoctrl.com/schneider/LX0FL005","factsUrl":"https://aoctrl.com/api/mcp/products/LX0FL005","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F contactor coil, LX0FL005, 48 V AC/DC control circuit voltage, obsolete status.","salesMarkdown":"The LX0FL005 is a TeSys F contactor coil from Schneider Electric, designed as the replaceable actuation coil for TeSys F contactors. It operates on a 48 V AC/DC control circuit, accepting AC from 50 to 400 Hz or DC standard supply. The coil is the service part that makes the contactor pull in and drop out, so if a contactor in the field stops engaging or drops out erratically, this is the component to swap before replacing the whole contactor assembly. The unlatching operating time is 50 to 100 ms, and the latching time is 40 to 80 ms — this timing governs how fast the contactor closes and opens, which matters for coordinating with other devices in a motor start circuit. The maximum operating rate is 120 cycles per hour at 104 °F (40 °C), so it's not intended for high-speed jogging or rapid cycling applications; exceeding that rate will overheat the coil. Mechanical durability is rated at 1 million cycles, which is the expected life of the coil mechanism under normal switching conditions before wear-out. ## Electrical characteristics for the panel The coil has an average resistance of 0.87 Ohm in the latching state and 204 Ohm in the unlatching state, both measured at 68 °F (20 °C). The latching resistance is the holding current path once the contactor is sealed in; the unlatching resistance is the initial pull-in circuit. Control circuit voltage limits are 0.85 to 1.1 times Uc for both latching and unlatching, meaning the coil will reliably operate between about 40.8 V and 52.8 V on a 48 V nominal supply. Below that range, the contactor may chatter or fail to pick; above it risks coil burnout.","metaTitle":"Schneider Electric LX0FL005 TeSys F Contactor Coil, 48 V AC/","metaDescription":"Schneider Electric LX0FL005 TeSys F contactor coil, 48 V AC/DC control voltage. Obsolete status; sourced to order against RFQ. Operating time 50-100 ms unlatching, 40-80 ms latchin","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactor & Starter Coils"],"specifications":{"Range":"TeSys","Category":"18401-WORLD SERVICE PARTS(CTR ACCESS)","Operating time":"50...100 ms unlatching 40...80 ms latching","lifecycle_stage":"current","Device short name":"LX0FL","Average resistance":"0.87 Ohm latching 68 °F (20 °C) 204 Ohm unlatching 68 °F (20 °C)","Control circuit type":"AC 50...400 Hz DC standard","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Product or Component Type":"Contactor coil","[Uc] control circuit voltage":"48 V AC 50...400 Hz 48 V DC","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6d266b96c1167d96f05ccb1ff55dae01.pdf","sourceUrl":"https://www.se.com/vn/en/product/LX0FL005/tesys-f-contactor-coil-lx0fl-48-v-ac-dc/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LX0FL005/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to LX0FL005 in this component family?","answer":"There is no official successor order code listed by Schneider for this coil. The LX0FL005 is a unique service part for TeSys F contactors; a direct replacement would need to be the same part number sourced from surplus stock."},{"question":"What is LX0FL005's listed range (TeSys) on this component line?","answer":"The LX0FL005 belongs to the TeSys range, specifically the TeSys F series of contactor coils."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX0FL005","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX0FL005 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}