{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX1D2T6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX1D2T6","canonicalUrl":"https://aoctrl.com/schneider/LX1D2T6","factsUrl":"https://aoctrl.com/api/mcp/products/LX1D2T6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys D LX1D2T6 contactor coil, 480 V AC 60 Hz, 70 VA inrush / 7.5 VA hold, 2304 Ohm coil resistance, for 9 to 18 A contactors.","salesMarkdown":"## What this coil does and where it fits The LX1D2T6 is the replacement coil for a TeSys D contactor — specifically the 480 V AC 60 Hz variant that energises the 9 to 18 A frame. It is the part you swap when the original coil opens or shorts, not the whole contactor. That means the coil pulls in reliably between 384 V and 528 V at the terminals — useful when line voltage sags under load. ## Coil electrical signature — inrush vs hold Inrush power is 70 VA at 60 Hz, cos phi 0.75; once the contactor seals, hold-in drops to 7.5 VA at cos phi 0.3. The ratio tells you the control transformer needs to deliver the inrush peak without dropping below the dropout threshold — a 100 VA control transformer on the same circuit handles this comfortably. Coil resistance measures 2304 Ohm at 20 °C, and the closed-circuit inductance is 85 H. The high inductance explains the low holding VA — the AC impedance at 60 Hz is about 32 kOhm once the armature seats. This coil ships without a built-in suppressor module. If the contactor drives an inductive load or the PLC output is a solid-state relay, you will need an external RC snubber or varistor across the coil to limit back-EMF on dropout. The LX1D2T6 is marked obsolete by Schneider Electric. No official successor order code is listed for this specific 480 V 60 Hz coil. Availability is through independent surplus and new-old-stock channels. Quantities are confirmed at RFQ time — typical for a legacy TeSys D coil that is no longer in factory production.","metaTitle":"Schneider Electric LX1D2T6 TeSys contactor coil","metaDescription":"Schneider Electric LX1D2T6 TeSys D replacement contactor coil, 480 V AC 60 Hz for 9 to 18 A contactors. Obsolete — sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactor & Starter Coils"],"specifications":{"Range":"TeSys","Category":"22341-CONTACTOR,D,K,&F ACCESS","Coil technology":"Without built-in suppressor module","lifecycle_stage":"current","Device short name":"LX1D2","Average resistance":"2304 Ohm 68 °F (20 °C)","Inrush power in VA":"70 VA 60 Hz cos phi 0.75 (at 68 °F (20 °C))","Control circuit type":"AC 60 Hz","Product or Component Type":"Contactor coil","Inductance of closed circuit":"85 H","[Uc] control circuit voltage":"480 V AC 60 Hz","Control circuit voltage limits":"Operational: 0.8...1.1 Uc at 60 Hz (at <131 °F (55 °C))","Hold-in power consumption in VA":"7.5 VA 60 Hz cos phi 0.3 (at 68 °F (20 °C))"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$76.35","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/LX1D2T6/tesys-d-contactor-coil-lx1d2-480-v-ac-60-hz-for-9-to-18-a-contactor/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LX1D2T6/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX1D2T6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX1D2T6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}