{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX1D2V5","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX1D2V5","canonicalUrl":"https://aoctrl.com/schneider/LX1D2V5","factsUrl":"https://aoctrl.com/api/mcp/products/LX1D2V5","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys D contactor coil, LX1D2V5, 400 V AC 50 Hz, for 9 to 18 A contactors.","salesMarkdown":"The LX1D2V5 is a replacement coil for the TeSys D contactor range, specifically the 400 V AC 50 Hz variant intended for 9 to 18 A frame contactors. It is an AC-operated coil with no built-in suppressor module, so an external RC snubber or varistor is your call depending on the PLC output driving it. Coil draws 60 VA inrush at 50 Hz (cos φ 0.75) and holds at 7 VA (cos φ 0.3) — the inrush-to-hold ratio is about 8.5:1, which matters if your control transformer is sized tight or shares a circuit with other inductive loads. Operational voltage range is 0.8 to 1.1 times Uc at 50 Hz (320 to 440 V AC) up to 55 °C ambient; outside that band the coil may not pull in reliably or could overheat on sustained overvoltage. Average DC resistance is 2069 Ω at 20 °C — a quick bench check if you suspect a winding short.","metaTitle":"Schneider Electric LX1D2V5 TeSys D Contactor Coil, 400 VAC 5","metaDescription":"Obsolete TeSys D contactor coil LX1D2V5, 400 VAC 50 Hz, for 9 to 18 A contactors. Sourced to order against RFQ via independent channels.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactor & Starter Coils"],"specifications":{"Range":"TeSys","Category":"22341-CONTACTOR,D,K,&F ACCESS","Coil technology":"Without built-in suppressor module","lifecycle_stage":"current","Device short name":"LX1D2","Average resistance":"2069 Ohm 68 °F (20 °C)","Inrush power in VA":"60 VA 50 Hz cos phi 0.75 (at 68 °F (20 °C))","Control circuit type":"AC 50 Hz","Product or Component Type":"Contactor coil","Inductance of closed circuit":"68 H","[Uc] control circuit voltage":"400 V AC 50 Hz","Control circuit voltage limits":"Operational: 0.8...1.1 Uc at 50 Hz (at <131 °F (55 °C))","Hold-in power consumption in VA":"7 VA 50 Hz cos phi 0.3 (at 68 °F (20 °C))"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/456168cb282a2dc7dbce389af7afa75c.pdf","sourceUrl":"https://www.se.com/vn/en/product/LX1D2V5/tesys-d-contactor-coil-lx1d2-400-v-ac-50-hz-for-9-to-18-a-contactor/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LX1D2V5/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to LX1D2V5 in the TeSys family?","answer":"There is no direct pin-compatible successor published under the LX1D2 prefix. For a new design, the practical approach is to select the complete contactor assembly (e.g., LC1D09...LC1D18) with the desired coil voltage, rather than sourcing the coil separately."},{"question":"What compliance documentation is available for LX1D2V5?","answer":"The evidence does not list specific compliance certificates (RoHS, REACH, UL, IEC) for this order code. Given its age and obsolete status, original documentation may be limited; we can check what the surplus lot carries on the nameplate."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX1D2V5","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX1D2V5 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}