{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX1D8L6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX1D8L6","canonicalUrl":"https://aoctrl.com/schneider/LX1D8L6","factsUrl":"https://aoctrl.com/api/mcp/products/LX1D8L6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys D LX1D8L6 contactor coil, 208 V AC 60 Hz, 300 VA inrush / 22 VA hold.","salesMarkdown":"The LX1D8L6 is a replacement coil for the TeSys D contactor range, wound for 208 V AC at 60 Hz. It's the part that pulls the contactor in — when this coil opens, the main poles close. Rated for 300 VA inrush at 0.8 power factor and 22 VA holding at 0.3 PF, both at 68 °F (20 °C). That inrush figure is what the control transformer and the PLC output driving it need to handle; the hold-in draw is what the contactor consumes once sealed. ## Fit and operating range Control circuit voltage limits are 0.85 to 1.1 Uc at up to 131 °F (55 °C), so the coil will pick up reliably at 176.8 V AC and must not see more than 228.8 V AC. Coil resistance is 67.92 Ω at 68 °F (20 °C) — useful for verifying the coil hasn't shorted before you bolt it in. The control circuit connector accepts 1 to 4 mm² flexible or solid wire, with a tightening torque of 1.2 N·m (10.6 lbf·in).","metaTitle":"Schneider LX1D8L6 TeSys D Contactor Coil, 208 V AC 60 Hz","metaDescription":"Schneider Electric LX1D8L6 replacement coil for TeSys D contactors. 208 V AC 60 Hz control voltage, 300 VA inrush, 22 VA hold. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactor & Starter Coils"],"specifications":{"Range":"TeSys","title":"LX1D8L6","Category":"22341-CONTACTOR,D,K,&F ACCESS","Coil type":"AC 60 Hz","description":"contactor coil, TeSys D LX1D, 208 V 60 Hz","lifecycle_stage":"current","Tightening torque":"Control circuit 10.6 lbf.in (1.2 N.m) connector","Average resistance":"67.92 Ohm 68 °F (20 °C)","Inrush power in VA":"300 VA 0.8 3P or 4P 68 °F (20 °C))","Control circuit type":"AC","Mechanical durability":"10000000 cycles","Nbr. of units in pkg.":"1","Connections - terminals":"Control circuit connector 1 0.002...0.006 in² (1...4 mm²)flexible with cable end Control circuit connector 1 0.002...0.006 in² (1...4 mm²)flexible without cable end Control circuit connector 1 0.002...0.006 in² (1...4 mm²)solid without cable end Control circuit connector 2 0.002...0.004 in² (1...2.5 mm²)flexible with cable end Control circuit connector 2 0.002...0.006 in² (1...4 mm²)flexible without cable end","Product or Component Type":"Contactor coil","[Uc] control circuit voltage":"208 V AC 60 Hz","Control circuit voltage limits":"0.85...1.1 Uc (at <131 °F (55 °C))","Hold-in power consumption in VA":"22 VA 60 Hz 0.3 3P or 4P 68 °F (20 °C))","Ambient Air Temperature for Operation":"68 °F (20 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a8dabbf377fb6d5063dd6fe46471b879.pdf","sourceUrl":"https://www.se.com/uk/en/product/LX1D8L6/contactor-coil-tesys-d-lx1d-208-v-60-hz/"},"ai":{"faq":[{"question":"What contactor does this coil fit?","answer":"It's a replacement coil for the TeSys D contactor range. The 208 V AC 60 Hz winding matches the standard D-series coil footprint and connector."},{"question":"What are the key electrical ratings for this coil?","answer":"Control voltage is 208 V AC at 60 Hz. Inrush power is 300 VA at 0.8 PF; hold-in power is 22 VA at 0.3 PF. Coil resistance is 67.92 Ω at 68 °F (20 °C). Operating voltage range is 0.85 to 1.1 Uc at up to 131 °F (55 °C)."},{"question":"What wire size does the control circuit connector accept?","answer":"The connector accepts 1 to 4 mm² flexible or solid wire. Tightening torque is 1.2 N·m (10.6 lbf·in)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX1D8L6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX1D8L6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}