{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX1FG1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX1FG1000","canonicalUrl":"https://aoctrl.com/schneider/LX1FG1000","factsUrl":"https://aoctrl.com/api/mcp/products/LX1FG1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F contactor coil, LX1FG1000, 1000 V AC 50 Hz, 805 VA inrush, 55 VA hold, 10 Mcycles mechanical durability.","salesMarkdown":"## Coil for TeSys F contactors — 1000 V AC 50 Hz The LX1FG1000 is a replacement coil for Schneider Electric TeSys F contactors, rated for 1000 V AC 50 Hz control circuits. It draws 805 VA inrush at 20 °C (cos φ 0.3) and settles to 55 VA holding — the 18…24 W heat dissipation at 50 Hz means the contactor enclosure needs ventilation if multiple coils are stacked in a sealed panel. Operating time is 20…35 ms closing, 7…15 ms opening — fast enough for motor starting duty but not for high-speed jogging circuits. The coil has no built-in suppressor module; if your control system uses solid-state outputs or a PLC with triac drivers, add an external RC snubber or varistor across the coil terminals to limit switching transients. ## Voltage tolerance and duty cycle Drop-out occurs at 0.35…0.55 Uc (350…550 V AC) and pick-up at 0.85…1.1 Uc (850…1100 V AC), both at 55 °C. That wide drop-out band means the coil will hold in through brief sags down to about 55 % of nominal — useful on weak utility feeds. Maximum operating rate is 2400 cycles per hour at 55 °C, which translates to one operation every 1.5 seconds; beyond that the coil temperature rise may exceed the 55 °C ambient limit. Mechanical durability is 10 million cycles — a long life for a contactor coil, but the electrical life of the main poles will be the limiting factor in most motor-switching applications. The coil resistance is 370 Ω at 20 °C; inductance of the closed circuit is 51.6 H, which influences the suppression component selection.","metaTitle":"Schneider LX1FG1000 TeSys F contactor coil, 1000 V AC 50 Hz","metaDescription":"TeSys F contactor coil LX1FG1000, 1000 V AC 50 Hz, 805 VA inrush, 55 VA hold, 10 Mcycles mechanical durability. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactor & Starter Coils"],"specifications":{"Range":"TeSys","title":"LX1FG1000","Category":"22341-CONTACTOR,D,K,&F ACCESS","description":"TeSys F - contactor coil - LX1FG - 1000 V AC 50 Hz","Operating time":"20...35 ms closing 7...15 ms opening","Coil technology":"Without built-in suppressor module","lifecycle_stage":"current","Heat dissipation":"18...24 W 50 Hz","Device short name":"LX1FG","Average resistance":"370 Ohm 68 °F (20 °C)","Inrush power in VA":"805 VA 50 Hz cos phi 0.3 (at 68 °F (20 °C))","Control circuit type":"AC 50 Hz","Mechanical durability":"10 Mcycles","Nbr. of units in pkg.":"1","Maximum operating rate":"2400 cyc/h 131 °F (55 °C)","Product or Component Type":"Contactor coil","Inductance of closed circuit":"51.6 H","[Uc] control circuit voltage":"1000 V AC 50 Hz","Control circuit voltage limits":"Drop-out 0.35...0.55 Uc 50/60 Hz 131 °F (55 °C)) Operational 0.85...1.1 Uc 50/60 Hz 131 °F (55 °C))","Hold-in power consumption in VA":"55 VA 50 Hz cos phi 0.3 (at 68 °F (20 °C))","Ambient Air Temperature for Operation":"23...131 °F (-5...55 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/19428a4c9636a0aaa3b7f2cbe1066119.pdf","sourceUrl":"https://www.se.com/vn/en/product/LX1FG1000/tesys-f-contactor-coil-lx1fg-1000-v-ac-50-hz/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to LX1FG1000 in this component family?","answer":"Within the TeSys F family, the LX1FG coil series shares the same mechanical footprint and terminal arrangement. The only difference is the control voltage — verify that an alternative coil (e.g., LX1FG for 400 V or 690 V AC) matches your control circuit voltage. No direct pin-compatible substitute with the same 1000 V AC rating exists in the same series."},{"question":"What is LX1FG1000's listed range (TeSys) on this component line?","answer":"The LX1FG1000 belongs to the Schneider Electric TeSys range, specifically the TeSys F contactor accessory family."},{"question":"What is LX1FG1000's listed category (22341-CONTACTOR,D,K,&F ACCESS) on this component line?","answer":"The category code 22341-CONTACTOR,D,K,&F ACCESS indicates this is an accessory (coil) for TeSys D, K, or F contactors, not a standalone contactor."},{"question":"What compliance documentation does this brand provide for LX1FG1000 (RoHS, REACH, UL, IEC)?","answer":"Schneider Electric typically provides RoHS and REACH declarations for TeSys components. UL and IEC compliance applies to the assembled contactor, not the coil alone. The coil itself is designed for use in UL-listed and IEC-rated contactor assemblies. Specific documentation is available from Schneider's product support portal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX1FG1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX1FG1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}