{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX1FL060","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX1FL060","canonicalUrl":"https://aoctrl.com/schneider/LX1FL060","factsUrl":"https://aoctrl.com/api/mcp/products/LX1FL060","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys LX1FL060, contactor coil, 60 V AC 50/60 Hz, for D-range contactors.","salesMarkdown":"## What this coil is for It is the control-side component that pulls in the contactor's main poles — when this coil fails, the contactor drops out, so it is a common spare for panel maintenance. No built-in suppressor module, so plan for external RC snubber or varistor across the coil terminals if driving from a PLC output or if the contactor switches inductive loads nearby. ## Mechanical endurance and operating rate Rated for 5 Mcycles mechanical durability, which is standard for a TeSys D-series coil — this is the mechanical life of the coil plunger and armature, not the contactor's electrical endurance under load. Maximum operating rate of 1200 cycles per hour at 55 °C means it can cycle every 3 seconds continuously at that temperature; derate for higher ambient or if the contactor is switching heavy loads that generate additional heat inside the enclosure. Listed as current production — this is an active catalog item, not a phase-out or NRND part. It is a standard spare that moves steadily through MRO channels; expect it to be a stocked line at most Schneider distributors. If you are freezing a BOM for a new panel design, this coil is a safe choice with no imminent obsolescence risk. ## Integration note Snaps onto the contactor base — no tools needed for the coil change. The 60 V AC coil draws its control power from a separate control transformer or a 60 V tap; verify the control circuit is AC (not DC) before wiring. The absence of a built-in suppressor means the coil's inductive kickback is unfiltered — if your PLC output card or relay driving this coil is rated for inductive loads at 60 V AC, you are fine; otherwise fit a suppressor across the coil terminals.","metaTitle":"TeSys LX1FL060 Contactor Coil, 60 V AC 50/60 Hz","metaDescription":"Active TeSys LX1FL060 replacement coil for D-range contactors. 60 V AC 50/60 Hz control, 5 Mcycles mechanical life. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactor & Starter Coils"],"specifications":{"Range":"TeSys","title":"LX1FL060","Category":"22341-CONTACTOR,D,K,&F ACCESS","description":"contactor coil - LX1F - 60 V AC - 50/60 Hz","Coil technology":"Without built-in suppressor module","lifecycle_stage":"current","Device short name":"LX1FL","Control circuit type":"AC 50/60 Hz","Mechanical durability":"5 Mcycles","Nbr. of units in pkg.":"1","Maximum operating rate":"1200 cyc/h 131 °F (55 °C)","Product or Component Type":"Contactor coil","[Uc] control circuit voltage":"60 V AC 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/724e3989e5941a195a3e28ca973a69fe.pdf","sourceUrl":"https://www.se.com/th/en/product/LX1FL060/contactor-coil-lx1f-60-v-ac-50-60-hz/"},"ai":{"faq":[{"question":"What is the closest alternative to LX1FL060 in the TeSys family?","answer":"Within the same D-range contactor family, the closest alternatives are other LX1F coils at different control voltages — LX1FL110 (110 V AC) or LX1FL024 (24 V AC) for example. They share the same mechanical interface and coil form factor, so swapping the voltage rating is the only change. No pin-compatible alternative at the same voltage exists outside this series."},{"question":"What compliance documentation is available for LX1FL060?","answer":"As a Schneider Electric TeSys component, it carries CE marking for the European market. RoHS and REACH compliance declarations are standard for the current-production TeSys range. UL and CSA listings apply to the contactor assembly, not to the coil as a separate component — check the specific contactor catalog number for those marks."},{"question":"What is the control circuit voltage and type?","answer":"60 V AC at 50/60 Hz. This is a single-voltage coil — not a dual-tap or auto-ranging type. The control circuit must supply 60 V AC within ±10% for reliable pickup."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX1FL060","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX1FL060 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}