{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX1FL350","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX1FL350","canonicalUrl":"https://aoctrl.com/schneider/LX1FL350","factsUrl":"https://aoctrl.com/api/mcp/products/LX1FL350","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys LX1FL350 contactor coil, 350 V AC 50/60 Hz, without built-in suppressor module.","salesMarkdown":"The Schneider Electric LX1FL350 is a replacement contactor coil from the TeSys range, designed for LX1F contactor frames. It operates on a 350 V AC control circuit at 50/60 Hz, with no built-in suppressor module — so you'll need to add external suppression (RC snubber or varistor) across the coil terminals if driving it from a PLC output or electronic controller. Rated for continuous duty, it delivers 5 Mcycles mechanical durability and a maximum operating rate of 1200 cycles per hour at 55 °C. That's a solid 20 operations per minute — enough for most conveyor cycling and pump start/stop sequences, but not for high-speed pick-and-place applications where you'd want a DC coil or a dedicated fast-switching contactor. Because it's a standard TeSys accessory, availability is generally stable through distribution. No pin-compatible direct alternative exists in the same family at this voltage — the LX1FL line is voltage-specific, so swapping to a 380 V or 400 V coil means changing the order code entirely. Mounts directly onto the LX1F contactor magnet assembly — no adapter plate needed. The coil terminals are clearly marked A1/A2 per IEC 60947-4-1. Wire with 1.5 mm² minimum for the control circuit; the inrush current at 350 V AC can pull several amps momentarily, so don't share the control transformer with sensitive electronics without isolation. No built-in suppressor means the coil's inductive kickback is your problem. If the contactor is switched by a PLC relay output, install a properly rated RC snubber (0.1 µF + 100 Ω, 630 V) across A1-A2 to protect the output. For hard-wired pushbutton control, the arc across the stop button contacts will be noticeable — a varistor (e.g., Schneider VZ3) extends button life.","metaTitle":"Schneider LX1FL350 TeSys Contactor Coil, 350 V AC","metaDescription":"Schneider Electric LX1FL350 TeSys contactor coil, 350 V AC 50/60 Hz, no built-in suppressor. Active lifecycle. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactor & Starter Coils"],"specifications":{"Range":"TeSys","title":"LX1FL350","Category":"22341-CONTACTOR,D,K,&F ACCESS","description":"contactor coil - LX1F - 350 V AC - 50/60 Hz","Coil technology":"Without built-in suppressor module","lifecycle_stage":"current","Device short name":"LX1FL","Control circuit type":"AC 50/60 Hz","Mechanical durability":"5 Mcycles","Nbr. of units in pkg.":"1","Maximum operating rate":"1200 cyc/h 131 °F (55 °C)","Product or Component Type":"Contactor coil","[Uc] control circuit voltage":"350 V AC 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1112ec66da996270e9cc3f1965716add.pdf","sourceUrl":"https://www.se.com/sg/en/product/LX1FL350/contactor-coil-lx1f-350-v-ac-50-60-hz/"},"ai":{"faq":[{"question":"What is the closest alternative to the LX1FL350 in the TeSys family?","answer":"There is no pin-compatible direct alternative at the same voltage. The LX1FL line is voltage-specific — a 380 V or 400 V coil requires a different order code (e.g., LX1FL380 or LX1FL400). For a 350 V AC application, this is the only TeSys coil that fits."},{"question":"What compliance documentation is available for the LX1FL350?","answer":"As a Schneider TeSys component, the LX1FL350 carries CE marking per the Low Voltage Directive (2014/35/EU). RoHS and REACH declarations are available from Schneider's documentation portal. UL/CSA listing applies to the assembled contactor, not the coil alone — verify with the complete contactor catalog number for your jurisdiction."},{"question":"What is the maximum operating rate of this coil?","answer":"Rated for 1200 cycles per hour at 55 °C — that's 20 operations per minute. Above that rate, the coil temperature rise may exceed the insulation class limit."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX1FL350","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX1FL350 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}