{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX1G3SKUEN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX1G3SKUEN","canonicalUrl":"https://aoctrl.com/schneider/LX1G3SKUEN","factsUrl":"https://aoctrl.com/api/mcp/products/LX1G3SKUEN","rawCanonicalId":null},"summary":{"shortDescription":"TeSys control module, LX1G3SKUEN, 100-250 V AC/DC coil, 3-pole, push-in terminals, active.","salesMarkdown":"The LX1G3SKUEN is a replacement coil module for Schneider TeSys three-pole contactors, carrying a 100–250 V AC/DC control circuit voltage. It’s the part you order when the original coil burns out or you need a different voltage for a panel build – not a complete contactor, just the magnetic coil assembly that snaps into the TeSys frame. The built-in bidirectional peak-limiting electronics handle the DC coil suppression internally – no external flyback diode or RC snubber needed across the coil. Push-in terminals on the control circuit accept 0.2–2.5 mm² solid or 0.25–2.5 mm² flexible with ferrule, AWG 26 to 14 depending on the wire type. That’s a spring-clamp – no screw tightening, but verify strip length and ferrule type before production wiring. Rated for ambient operation -25…+60 °C, storage -60…+80 °C. Mechanical durability is 5 Mcycles; maximum operating rate 600 cycles/min at 60 °C. The LX1G3SKUEN is an active-production part – no end-of-life notice, no last-time-buy deadline. Supply runs through standard distribution; lead time is quoted against your RFQ and depends on current factory backlog. Because it’s an exact-fit TeSys coil with no generic substitute, the procurement decision is straightforward: confirm the frame size and voltage, then commit the BOM line.","metaTitle":"Schneider LX1G3SKUEN Contactor Coil, 100-250 V AC/DC","metaDescription":"Active-production replacement coil for TeSys contactors. 100-250 V AC/DC control, 690 W DC inrush, push-in terminals. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"3.7 in (93.0 mm)","Range":"TeSys","Width":"5.5 in (140.0 mm)","Height":"6.6 in (167.0 mm)","Category":"US10I1222328","Standards":"EN/IEC 60947-4-1 UL 60947-4-1A CSA C22.2 No 60947-4-1","Operating time":"20...35 ms opening 40...55 ms closing","Coil technology":"Built-in bidirectional peak limiting","lifecycle_stage":"current","Pollution degree":"3 IEC 60947-1","Quantity per Set":"1","Device short name":"LX1G","Inrush power in W":"690.0 W DC","Poles description":"3P","Inrush power in VA":"880 VA 240 V AC, 60 Hz","Operating altitude":"9842.52 ft (3000 m) without derating 5000 m with derating factor","Mechanical durability":"5 Mcycles","Nbr. of units in pkg.":"1","Maximum operating rate":"600 cyc/mn 140 °F (60 °C)","Connections - terminals":"Control circuit push-in termination 1 0.0003...0.004 in² (0.2...2.5 mm²) solid stranded without cable end sleeve AWG 26...AWG 12 Control circuit push-in termination 1 0.0004...0.004 in² (0.25...2.5 mm²) flexible with cable end sleeve AWG 24...AWG 14 Control circuit push-in termination 2 0.0008...0.002 in² (0.5...1.0 mm²) rigid or stranded with cable end sleeve AWG 20...AWG 18","IP degree of protection":"IP20 IEC 60529","Product or Component Type":"Contactor coil","[Uc] control circuit voltage":"100...250 V AC/DC 50/60 Hz","Electromagnetic compatibility":"EMC immunity conforming to IEC 60947-4-1 Emission tests criteria A conforming to IEC 60947-4-1 Immunity to radiated radio-electrical interference - test level: 20 V/m conforming to EN/IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to SEMI F47","Control circuit voltage limits":"Operational 0.8...1.1 Uc 140 °F (60 °C)) Drop-out 0...0.45 Uc 140 °F (60 °C))","Hold-in power consumption in W":"6.2 W DC","Hold-in power consumption in VA":"11.0 VA 240 V AC, 60 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"-13...140 °F (-25...60 °C)","Permissible ambient air temperature around the device":"-40...158 °F (-40...70 °C) at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$347.37 – $423.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a21410307ab2cea220404efb022c245a.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/LX1G3SKUEN/alternatives.json"},"ai":{"faq":[{"question":"What are the compliance certifications for LX1G3SKUEN?","answer":"The coil meets EN/IEC 60947-4-1, UL 60947-4-1A, and CSA C22.2 No 60947-4-1. It also complies with EMC immunity per IEC 60947-4-1 and SEMI F47 voltage dips/interruptions."},{"question":"What is the depth, width, and height of LX1G3SKUEN?","answer":"Depth is 3.7 in (93.0 mm), width 5.5 in (140.0 mm), height 6.6 in (167.0 mm)."},{"question":"What is the TeSys range for LX1G3SKUEN?","answer":"It belongs to the Schneider TeSys product range, which covers motor control and protection components for industrial panels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX1G3SKUEN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX1G3SKUEN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}