{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX1G4SBEEA","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX1G4SBEEA","canonicalUrl":"https://aoctrl.com/schneider/LX1G4SBEEA","factsUrl":"https://aoctrl.com/api/mcp/products/LX1G4SBEEA","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys series, contactor coil LX1G4SBEEA, 4 poles, 24...48 V AC/DC control circuit, built-in bidirectional peak limiting, IP20.","salesMarkdown":"## What This Coil Is For The LX1G4SBEEA is the replacement coil for a Schneider TeSys 4-pole contactor. It pulls in on 24 to 48 V AC/DC, and the built-in bidirectional peak limiting handles the snubbing itself — you don't need an external R-C or varistor across the coil. Rated for 5 million mechanical cycles, and it'll cycle up to 600 times a minute at 140 °F (60 °C) ambient. That's a lot of opening and closing before the coil gives up. Opening time runs 20 to 35 ms, closing 40 to 55 ms — consistent enough for sequence timing on a motor starter or reversing circuit. Compliance is covered: the coil meets EN/IEC 60947-4-1, UL 60947-4-1A, and CSA C22.2 No 60947-4-1. Pollution degree 3 for dirty panels, and it holds a SEMI F47 immunity rating for voltage dips – good for semiconductor fab gear. Physical footprint: 6.6 in high, 7.3 in wide, 3.7 in deep – it sits where the TeSys frame expects it. AWG 26 to 12 for solid, AWG 24 to 14 for flexible with ferrule. Operating temperature range is -13 to 140 °F (-25 to 60 °C); storage down to -76 °F (-60 °C). If you're mounting it up high where the ambient creeps near 158 °F (70 °C), the coil can still hold at rated control voltage.","metaTitle":"Schneider LX1G4SBEEA TeSys Contactor Coil, 24-48 V AC/DC","metaDescription":"Active contactor coil for TeSys 4-pole contactors. 24-48 V AC/DC control circuit with built-in bidirectional peak limiting. Sourced per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"3.7 in (93.0 mm)","Range":"TeSys","Width":"7.3 in (185.0 mm)","Height":"6.6 in (167.0 mm)","Category":"US10I1222328","Standards":"EN/IEC 60947-4-1 UL 60947-4-1A CSA C22.2 No 60947-4-1","Operating time":"20...35 ms opening 40...55 ms closing","Coil technology":"Built-in bidirectional peak limiting","lifecycle_stage":"current","Pollution degree":"3 IEC 60947-1","Quantity per Set":"1","Device short name":"LX1G","Poles description":"4P","Operating altitude":"9842.52 ft (3000 m) without derating 5000 m with derating factor","Mechanical durability":"5 Mcycles","Nbr. of units in pkg.":"1","Maximum operating rate":"600 cyc/mn 140 °F (60 °C)","Connections - terminals":"Control circuit push-in termination 1 0.0003...0.004 in² (0.2...2.5 mm²) solid stranded without cable end sleeve AWG 26...AWG 12 Control circuit push-in termination 1 0.0004...0.004 in² (0.25...2.5 mm²) flexible with cable end sleeve AWG 24...AWG 14 Control circuit push-in termination 2 0.0008...0.002 in² (0.5...1.0 mm²) rigid or stranded with cable end sleeve AWG 20...AWG 18","IP degree of protection":"IP20 IEC 60529","Product or Component Type":"Contactor coil","[Uc] control circuit voltage":"24...48 V AC/DC 50/60 Hz","Electromagnetic compatibility":"EMC immunity conforming to IEC 60947-4-1 Emission tests criteria A conforming to IEC 60947-4-1 Immunity to radiated radio-electrical interference - test level: 20 V/m conforming to EN/IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to SEMI F47","Control circuit voltage limits":"Operational 0.8...1.1 Uc 140 °F (60 °C)) Drop-out 0...0.45 Uc 140 °F (60 °C))","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"-13...140 °F (-25...60 °C)","Permissible ambient air temperature around the device":"-40...158 °F (-40...70 °C) at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$421.28","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0166104ba81ecf159ba7491016186a52.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/LX1G4SBEEA/alternatives.json"},"ai":{"faq":[{"question":"What is the control voltage range?","answer":"The coil operates on 24 to 48 V AC/DC (50/60 Hz). It pulls in at 0.8 to 1.1 Uc and drops out below 0.45 Uc at 140 °F (60 °C)."},{"question":"What standards does it comply with?","answer":"It meets EN/IEC 60947-4-1, UL 60947-4-1A, CSA C22.2 No 60947-4-1, and EMC immunity per IEC 60947-4-1 with test level 20 V/m for radiated interference."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX1G4SBEEA","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX1G4SBEEA when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}