{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LX4FL080","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LX4FL080","canonicalUrl":"https://aoctrl.com/schneider/LX4FL080","factsUrl":"https://aoctrl.com/api/mcp/products/LX4FL080","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys contactor coil, LX4FL080, 80 V DC control circuit, 40...50 ms opening / 60...70 ms closing, without built-in suppressor module.","salesMarkdown":"The LX4FL080 is a replacement contactor coil from the Schneider Electric TeSys range, designed for DC low-consumption control circuits at 80 V DC. It's the drop-in energizing component for TeSys contactors that use the FK-style coil platform — you swap the coil, not the whole contactor, when the control voltage changes or the original coil fails. Coil pull-in and drop-out are governed by the control circuit voltage limits: the coil operates reliably between 0.85 and 1.1 Uc (68 to 88 V DC) at 55 °C, and drops out between 0.2 and 0.35 Uc (16 to 28 V DC). That drop-out window matters for applications where the DC bus sags under load — if your bus holds above 28 V during a brownout, the contactor stays sealed. Opening time is 40 to 50 ms; closing is 60 to 70 ms, which is typical for a DC-operated power contactor and fast enough for most motor and resistive load switching. This coil ships without a built-in suppressor module. That means you need to add an external flyback diode or RC snubber across the coil terminals if the control circuit drives the coil from a PLC output or solid-state relay — the inductive kick from the coil can damage electronics without suppression. The LX4FL080 is listed as an active product. It is a service part — not a full contactor assembly — so it is typically quoted to order rather than sitting on a shelf.","metaTitle":"Schneider Electric LX4FL080 TeSys contactor coil, 80 V DC","metaDescription":"Active TeSys contactor coil LX4FL080, 80 V DC control, 40-50 ms opening, 60-70 ms closing. No built-in suppressor. Sourced to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Coil Voltage":"80 V DC","Operating Time":"40...50 ms opening 60...70 ms closing","Product Status":"Active","Temp Operating Max":"55 °C","Temp Operating Min":"-5 °C","Control Circuit Type":"DC low consumption","Main Product Or Component Type":"Contactor coil","Ambient Air Temperature Operation":"23...131 °F (-5...55 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/06d366662651f4672fc2c871b11173cb.pdf","sourceUrl":"https://www.se.com/sg/en/product/LX4FL080/contactor-coil-fk-80-v-dc/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LX4FL080/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LX4FL080","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LX4FL080 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}