{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXM05AD42M3X","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXM05AD42M3X","canonicalUrl":"https://aoctrl.com/schneider/LXM05AD42M3X","factsUrl":"https://aoctrl.com/api/mcp/products/LXM05AD42M3X","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 05 LXM05AD42M3X motion servo drive, 3.2 kW at 4 kHz, 200-240 V three-phase, 19 A line current at 200 V, with integrated EMC filter.","salesMarkdown":"## Lexium 05 drive — 3.2 kW, 200-240 V, obsolete The LXM05AD42M3X is a Schneider Electric Lexium 05 motion servo drive rated at 3.2 kW nominal power at a 4 kHz switching frequency, with a continuous output current of 17 A at 4 kHz and 15 A at 8 kHz. It accepts a three-phase 200-240 V supply (170-264 V limits) at 50/60 Hz, drawing 19 A line current at 200 V and 15.8 A at 240 V. The drive includes an integrated EMC filter and supports both CANopen (with integrated and switchable impedances) and Modbus (no polarization impedances) fieldbus options. ## Output current, inrush, and transient capability Continuous output current is 17 A at 4 kHz switching frequency, derating to 15 A at 8 kHz — the higher carrier frequency quiets motor whine but reduces continuous torque capability. Transient RMS output current reaches 30 A for 3 seconds at either 4 kHz or 8 kHz, giving headroom for acceleration peaks or load disturbances. Inrush current is 60 A; the maximum prospective line Isc is 5 kA, which sets the upstream fuse or MCCB coordination requirements. ## I/O complement and altitude derating The drive provides 2 analogue inputs, 4 logic discrete inputs, and 2 safety discrete inputs — the safety inputs allow a separate safety relay or PLC to cut drive torque without cycling main power. Output voltage is derated at altitudes above 1000 m up to 2000 m — installations above sea level must account for reduced cooling air density. Overvoltage category III means the drive is rated for fixed-installation distribution-level transients, typical for industrial panel feed. ## Lifecycle — obsolete, sourced per RFQ No official pin-compatible successor is recorded from Schneider — any replacement requires checking the Lexium 05 family or migrating to a current Lexium series with a different footprint.","metaTitle":"Schneider Electric LXM05AD42M3X Lexium 05 Servo Drive","metaDescription":"Schneider Electric LXM05AD42M3X Lexium 05 servo drive, 3.2 kW at 4 kHz, 200-240 V three-phase. Obsolete — sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Drives"],"specifications":{"Line current":"19 A at 200 V 15.8 A at 240 V","Nominal power":"3.2 kW at 4 kHz","Component name":"LXM05A","Inrush current":"60 A","Output voltage":"1000...2000 m with conditions","lifecycle_stage":"current","Range of product":"Lexium 05","Supply frequency":"50/60 Hz - 5...5 %","Switching frequency":"8 kHz 4 kHz","Overvoltage category":"III","Power Supply Voltage":"200...240 V - 15...10 %","Type of polarization":"Integrated and switchable impedances for CANopen No polarization impedances for Modbus","Analogue input number":"2","Discrete input number":"2 safety discrete input(s) 4 logic discrete input(s)","Maximum leakage current":"30 mA","Network number of phases":"Three phase","Continuous output current":"15 A at 8 kHz 17 A at 4 kHz","Product or component type":"Motion servo drive","Power Supply Voltage Limits":"170...264 V","maximum prospective line Isc":"5 kA","transient RMS output current":"30 A at 4 kHz for 3 s 30 A at 8 kHz for 3 s","Power Supply Frequency Limits":"47.5...63 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a2bbc05fc701b991cac4c480cce11026.pdf","sourceUrl":"https://www.se.com/in/en/product/LXM05AD42M3X/motion-servo-drive-lxm05a-3-2-kw-200-240-v-3phase-with-emc-filter/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LXM05AD42M3X/alternatives.json"},"ai":{"faq":[{"question":"What is the line current of the LXM05AD42M3X?","answer":"The line current is 19 A at 200 V supply and 15.8 A at 240 V supply, three-phase."},{"question":"What is the nominal power rating of this servo drive?","answer":"The nominal power is 3.2 kW at a 4 kHz switching frequency."},{"question":"What compliance documentation does Schneider provide for the LXM05AD42M3X?","answer":"The drive carries the standard Schneider compliance suite for the Lexium 05 series, including CE marking for the European market. Specific RoHS, REACH, or UL documentation should be confirmed against the nameplate and the manufacturer's declaration at the time of order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXM05AD42M3X","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXM05AD42M3X when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}