{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXM16MU15M2X","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXM16MU15M2X","canonicalUrl":"https://aoctrl.com/schneider/LXM16MU15M2X","factsUrl":"https://aoctrl.com/api/mcp/products/LXM16MU15M2X","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy Lexium 16 servo drive, LXM16MU15M2X, 1.5 kW at 220 V, single-phase 200-240 VAC, 8 kHz switching frequency, no EMC filter, Modbus communication, compact housing.","salesMarkdown":"## Sizing the drive to the load The LXM16MU15M2X delivers 1.5 kW nominal at 220 V with an 8 kHz switching frequency. That power rating is the continuous output the drive can sustain into the motor — size the motor nameplate at or below this figure to keep the IGBT junction within its thermal limit. Continuous output current is 8.3 A, with a 3-second peak of 30 A at 220 V. The peak figure handles acceleration torque transients; the continuous figure governs the RMS load current the drive sees over a full cycle. Line current draw is 14.4 A at 144.8 % of rated load — a single-phase 200-240 VAC supply at 50/60 Hz. The supply must be capable of this draw; the input wiring and upstream breaker are sized from the line current, not the output current. ## Supply and installation constraints Single-phase 200-240 VAC input, with a tolerance of -15% to +10%. The drive is rated overvoltage category III — suitable for fixed installation downstream of the building distribution board, with transient withstand to that category. Maximum leakage current is 3.5 mA. This is below the 30 mA threshold for most Type A RCDs, but if the installation requires a Type B RCD for drives, verify the leakage sum across all connected drives. The drive ships without an EMC filter — the system builder must add an external filter to meet conducted-emission limits for the target market (CE, UKCA, etc.). The filter selection depends on cable length and switching frequency. ## Production status and sourcing This is a current-model Easy Lexium 16 drive. The compact housing format fits the same footprint as other LXM16D-family drives; panel cut-out and mounting dimensions are common across the series.","metaTitle":"Schneider Electric LXM16MU15M2X Servo Drive, 1.5 kW","metaDescription":"Schneider Electric LXM16MU15M2X Easy Lexium 16 servo drive, 1.5 kW at 220 V, 8 kHz switching frequency, single-phase 200-240 VAC, no EMC filter, Modbus.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"LXM16MU15M2X","description":"motion servo drive, Easy Lexium 16, single phase 200...240V 1.5kW, no EMC filter, Modbus","Line current":"14.4 A 144.8 % at 220 V, single phase","Nominal power":"1.5 kW at 220 V 8 kHz","Output voltage":"1000...2000 m with current derating","lifecycle_stage":"current","Continuous power":"1500 W at 220 V","Range of product":"Easy Lexium 16","Supply frequency":"50/60 Hz - 5...5 %","Device short name":"LXM16D","Network frequency":"47.5...63 Hz","Format of the drive":"Compact housing","Switching frequency":"8 kHz","Overvoltage category":"III","Supply voltage limits":"200...240 V single phase","Output current 3s peak":"30 A at 220 V","Maximum leakage current":"3.5 mA","Network number of phases":"Single phase","Continuous output current":"8.3 A","Product or component type":"Motion servo drive","[Us] rated supply voltage":"220 V (- 15...10 %) for single phase"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4304aabcfac567e9ff583aba5231b763.pdf","sourceUrl":"https://www.se.com/id/en/product/LXM16MU15M2X/motion-servo-drive-easy-lexium-16-single-phase-200-240v-1-5kw-no-emc-filter-modbus/"},"ai":{"faq":[{"question":"What is the continuous and peak output current for LXM16MU15M2X?","answer":"Continuous output current is 8.3 A; peak output current (3-second) is 30 A at 220 V. The continuous figure is the RMS limit for the drive, the peak handles acceleration transients."},{"question":"What is the line current draw for LXM16MU15M2X?","answer":"Line current is 14.4 A at 144.8 % of rated load, single-phase 200-240 VAC. This is the input current the supply wiring and upstream protection must be sized for."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXM16MU15M2X","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXM16MU15M2X when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}