{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXM23DU55M3X","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXM23DU55M3X","canonicalUrl":"https://aoctrl.com/schneider/LXM23DU55M3X","factsUrl":"https://aoctrl.com/api/mcp/products/LXM23DU55M3X","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric LXM23DU55M3X motion servo drive, Lexium 23 Plus series, 5.5 kW at 220 V, three-phase 170-255 V supply, 40 A continuous output, book format.","salesMarkdown":"## Reading the lifecycle signal first The LXM23DU55M3X is flagged obsolete on the manufacturer's record, so the conversation shifts from new-channel catalog stock to independent supply and last-buy inventory — what is on the market now is what stays on the market. For a procurement line, that changes the RFQ posture: lead time and unit availability are confirmed only when a quote is opened, and any board revision that swaps this drive in must be planned as a one-way move with no factory replenishment behind it. ## What the part is and where it sits in the cabinet The LXM23DU55M3X is a motion servo drive from the Lexium 23 Plus series, packaged in the book format that mounts side-by-side in a control cabinet and pairs with a matching Lexium 23 motor for position, velocity, or torque control. ## Power rating and how it sizes to the motor Nominal power is 5.5 kW at 220 V with a continuous output current of 40 A — the 5.5 kW figure is the sizing number for matching a Lexium 23 servo motor in the same frame, not a mechanical shaft rating, and the 40 A continuous figure is the thermal ceiling that the motor's continuous current must sit under at the worst-case ambient. Output voltage is given as 1000 to 2000 m with continuous power derating of 1 % per 100 m of altitude — at a 1500 m panel installation the continuous output drops to roughly 95 % of nameplate, and at 2000 m it drops another 5 %, which matters for high-altitude cabinets where the motor may need to be sized down or the drive de-rated. Maximum leakage current is 3.5 mA, above the 3.5 mA threshold that triggers the IEC 61800-5-1 fixed-installation PE requirement — the cabinet PE conductor must be sized accordingly and any upstream RCD must be of the type tolerant to pulsed DC leakage, otherwise the drive trips on first power-up. ## Sourcing posture for a discontinued servo drive With the part flagged obsolete, independent distribution channels hold the remaining factory-traceable stock — quote the BOM quantity and the supply window is confirmed against what the channel can pull from current inventory; no factory replenishment is behind this code. Plan for the next revision now: if the cabinet design will run another five to ten years, evaluate the current-generation Lexium successor or a comparable three-phase servo drive before the independent channel runs dry — leaving a discontinued drive in a long-lifecycle machine is the most expensive way to find out stock is gone.","metaTitle":"LXM23DU55M3X Lexium 23 Plus 5.5 kW 220 V Servo Drive","metaDescription":"Schneider LXM23DU55M3X motion servo drive, Lexium 23 Plus, 5.5 kW at 220 V, three-phase 170-255 V, 40 A output. Obsolete — sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Drives"],"specifications":{"Nominal power":"5.5 kW at 220 V","Output voltage":"1000...2000 m with continuous power derating of 1 % per 100 m","lifecycle_stage":"current","Continuous power":"5500 W at 220 V","Range of product":"Lexium 23 Plus","Supply frequency":"50/60 Hz - 5...5 %","Device short name":"LXM23","Format of the drive":"Book","Supply voltage limits":"170...255 V 3 phases","Maximum leakage current":"3.5 mA","Network frequency limits":"47.5...63 Hz","Network number of phases":"3 phases","Continuous output current":"40 A","Product or component type":"Motion servo drive","[Us] rated supply voltage":"220 V 3 phases (tolerance: - 20...15 %)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/uk/en/product/LXM23DU55M3X/motion-servo-drive-lexium-23-three-phase-170-255-v-5-5-kw-i-o/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LXM23DU55M3X/alternatives.json"},"ai":{"faq":[{"question":"What is the listed nominal power on the LXM23DU55M3X?","answer":"Nominal power is 5.5 kW at 220 V, with a continuous output current of 40 A — the sizing figure for matching a Lexium 23 series servo motor in the same frame."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXM23DU55M3X","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXM23DU55M3X when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}