{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXM26DU20M3X","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXM26DU20M3X","canonicalUrl":"https://aoctrl.com/schneider/LXM26DU20M3X","factsUrl":"https://aoctrl.com/api/mcp/products/LXM26DU20M3X","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy Lexium 26 LXM26DU20M3X motion servo drive, three-phase 200...230 V, 2 kW, 12 A continuous output at 8 kHz, compact housing.","salesMarkdown":"## 2 kW at 220 V — the continuous power ceiling for motor matching The LXM26DU20M3X delivers 2 kW continuous power at 220 V three-phase input, with the same figure confirmed as both nominal and continuous power — meaning the drive sustains full rated torque without derating across the duty cycle, not just a peak rating. Continuous output current is 12 A at the default 8 kHz switching frequency. The 3-second peak of 36 A at 220 V gives headroom for acceleration transients — useful when sizing for high-inertia loads like indexing conveyors or rotary tables where the RMS stays under 12 A but the peak exceeds it momentarily. Line current draw is 8.7 A at 137.1 % of rated load — a figure that matters when sizing the upstream branch circuit protection and the supply transformer. At full load the drive pulls less than 9 A per phase, so a 10 A or 16 A MCB on the three-phase feed is the typical coordination point. ## Compact housing, three-phase supply — panel fit and supply constraints The drive ships in a compact housing format — no frame size is stated, but the form factor is designed for DIN-rail or panel-mount integration where space is at a premium. The supply voltage limits are 170...255 V three-phase, with rated supply at 220 V (-10/+15 %), so it runs on nominal 200–230 V three-phase networks common in North American and Asian light-industrial plants. Overvoltage category III means the drive is rated for fixed-installation distribution-level transients — no additional surge suppression needed on the incoming supply side within a standard panel. Maximum leakage current is 1.35 mA — below the 3.5 mA threshold that triggers mandatory hardwired earth-leakage detection in most industrial installations, so standard Type A RCDs on the supply side are acceptable unless multiple drives share a single RCD. ## Active production — no lifecycle risk for BOM planning The LXM26DU20M3X carries an active lifecycle status — no end-of-life notice, no last-time-buy window. For a category-sourcing perspective, this means the drive is a safe anchor for multi-year production BOMs without requalification risk from obsolescence. It belongs to the Easy Lexium 26 range, positioned as a compact, cost-optimized servo drive family for basic motion control applications — not the high-performance Lexium 32 series, but a solid fit for applications where the 8 kHz switching frequency and 2 kW ceiling match the load profile.","metaTitle":"Schneider Electric LXM26DU20M3X Servo Drive, 2 kW, 220 V","metaDescription":"Schneider Electric LXM26DU20M3X Easy Lexium 26 servo drive, 2 kW at 220 V three-phase, 12 A continuous output. Active production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"LXM26DU20M3X","description":"motion servo drive - Lexium 26 - three phase 200...230 V - 2 kW","Line current":"8.7 A 137.1 % at 220 V, three phase","Nominal power":"2 kW at 220 V 8 kHz","Output voltage":"1000...2000 m 1 % per 100 m","lifecycle_stage":"current","Continuous power":"2000 W at 220 V","Range of product":"Easy Lexium 26","Supply frequency":"50/60 Hz - 5...5 %","Device short name":"LXM26D","Network frequency":"47.5...63 Hz","Format of the drive":"Compact housing","Switching frequency":"8 kHz","Overvoltage category":"III","Supply voltage limits":"170...255 V three phase","Output current 3s peak":"36 A at 220 V","Maximum leakage current":"1.35 mA","Network number of phases":"Three phase","Continuous output current":"12 A at 8 kHz","Product or component type":"Motion servo drive","[Us] rated supply voltage":"220 V (- 10...15 %) for three phase"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9ab01137812a71787e35e1b95f29e3d7.pdf","sourceUrl":"https://www.se.com/id/en/product/LXM26DU20M3X/motion-servo-drive-lexium-26-three-phase-200-230-v-2-kw/"},"ai":{"faq":[{"question":"Where can I buy LXM26DU20M3X and how do I get a price?","answer":"Submit an RFQ for current availability and pricing — lead time and volume breaks are confirmed at quote time, not from a shelf stock figure."},{"question":"What is LXM26DU20M3X's listed line current?","answer":"The line current is 8.7 A at 137.1 % of rated load, measured at 220 V three-phase input. This is the draw under overload conditions — at continuous rated load the line current will be lower, typically proportional to the 12 A continuous output current."},{"question":"What is LXM26DU20M3X's listed nominal power?","answer":"Nominal power is 2 kW at 220 V with an 8 kHz switching frequency. Continuous power is also rated at 2000 W at 220 V, so the drive sustains its full power rating without thermal derating under normal conditions."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXM26DU20M3X","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXM26DU20M3X when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}