{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXM28EU04M1X","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXM28EU04M1X","canonicalUrl":"https://aoctrl.com/schneider/LXM28EU04M1X","factsUrl":"https://aoctrl.com/api/mcp/products/LXM28EU04M1X","rawCanonicalId":null},"summary":{"shortDescription":"Schneider LXM28EU04M1X — now discontinued, supplied from remaining surplus and broker stock.","salesMarkdown":"## Overview The LXM28EU04M1X is a Schneider Lexium 28 single-axis AC servo drive rated 400 W at 110 V supply, delivering 2.6 A continuous at 16 kHz switching frequency with integrated EtherCAT on an RJ45 port. It runs on 24 V DC logic power, carries CSA, CULus, and CE markings, and is built to IP20 with natural convection cooling — no internal EMC filter, so plan for an external filter at the line entry. The LXM28EU04M1X delivers 2.6 A at 16 kHz versus the LXM32MD12N4's 3 A at 8 kHz — the LXM28E runs a higher switching frequency for smoother low-speed torque but at a lower continuous current, so size up to the LXM32MD12N4 when the load demands more than 2.6 A RMS.","metaTitle":"Schneider LXM28EU04M1X Lexium 28 servo drive, 400 W, EtherCAT","metaDescription":"Schneider LXM28EU04M1X Lexium 28 single-axis servo drive: 400 W at 110 V, 2.6 A at 16 kHz, EtherCAT, IP20, no EMC filter, natural convection.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Depth":"170 mm","Width":"55 mm","Height":"150 mm","Marking":"CSA CULus CE","Standards":"IEC 61800-5-1","EMC filter":"Without EMC filter","Status LED":"1 LED (red) DC bus energized 1 LED (multi-colour) N.RUN 1 LED (multi-colour) N.ERR 2 LEDs (yellow) Link (Link Status) 2 LEDs (yellow) activity","Line current":"5.7 A 211.6 % at 110 V, single phase","Safety level":"SIL 2 conforming to IEC 61800-5-2: 2007 SIL 2 conforming to IEC 61508-1: 2010 PL d/category 3 conforming to ISO 13849-1: 2008 SIL 2 conforming to ISO 13849-1: 2009/AC SIL 2 conforming to IEC 60204-1: 2006 SIL 2 conforming to IEC 60204-1: 2009/A1 SIL 2 conforming to IEC 60204-1: 2010/AC SIL 2 conforming to IEC 62061: 2012","Nominal power":"0.4 kW at 110 V 16 kHz","Type of cable":"Shielded motor cable (temperature: 0...55 °C) copper","Connector type":"RJ45 (CN4) for EtherCAT","Output voltage":"<= power supply voltage","Field weakening":"False","Protection type":"Against reverse polarity: inputs signal Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor","Safety function":"STO (safe torque off), integrated","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"400 W at 110 V","Method of access":"Slave","Range of product":"Lexium 28","Shock resistance":"10 gn, type I conforming to IEC 60721-3-3","Supply frequency":"50/60 Hz - 5...5 %","Device short name":"LXM28E","Network frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation","Transmission rate":"100 Mbit/s for EtherCAT","Operating altitude":"<= 1000 m without derating","Operating position":"Vertical","Physical interface":"RS485 for Modbus Serial line slave","Control signal type":"Servo motor encoder feedback CN2","Format of the drive":"Compact housing","Signalling function":"Servo status and fault codes five 7-segment display units","Switching frequency":"16 kHz","Discrete input logic":"Positive or negative (CN1)","Electrical isolation":"Between power and control","Overvoltage category":"III","Vibration resistance":"3M4 amplitude = 3 mm (f = 9...200 Hz) conforming to IEC 60721-3-3","Discrete input number":"8 programmable (CN1) 2 fast capture (CN1) 1 safety function STO (CN9)","Discrete output logic":"Positive or negative (CN1)","Electrical connection":"Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S)","Supply voltage limits":"108...132 V single phase","Switching frequency 2":"16 kHz","Switching frequency 3":"16 kHz","Discrete input voltage":"24 V DC for logic","Discrete output number":"1 pulse train output (PTO) (CN1) 4 logic output (CN1) at 12...24 V DC","Output current 3s peak":"7.8 A at 110 V","Communication interface":"EtherCAT, integrated","Discrete output voltage":"12...24 V DC","IP degree of protection":"IP20","Maximum leakage current":"0.9 mA","Communication iinterface":"EtherCAT Pulse train output","Emc filter compatibility":"Type 022 Type 020","Network number of phases":"1","Continuous output current":"2.6 A at 16 kHz","Product or component type":"Motion servo drive","[Us] rated supply voltage":"110 V (- 2...20 %) for single phase","Supply voltage description":"Single phase 110 V AC 50...60 Hz","Continuous output current 2":"2.6 A","Continuous output current 3":"2.6 A","Electromagnetic compatibility":"Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3","Drive voltage drop coefficient":"1","Ambient air temperature for storage":"-25...65 °C","Ambient air temperature for operation":"0...55 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,089.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6bcf5055dffe0b38ed95edae885a4ded.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/LXM28EU04M1X/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXM28EU04M1X","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXM28EU04M1X when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}