{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXM62DD15A21000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXM62DD15A21000","canonicalUrl":"https://aoctrl.com/schneider/LXM62DD15A21000","factsUrl":"https://aoctrl.com/api/mcp/products/LXM62DD15A21000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 LXM62 single drive, LXM62DD15A21000, 5 A continuous / 15 A peak, 400 V three-phase, SERCOS III, STO, IP20.","salesMarkdown":"## Single-axis servo drive for the PacDrive 3 cabinet The LXM62DD15A21000 is a single servo drive on the PacDrive 3 platform, device short name LXM 62, built to slot into a control cabinet as one axis of a multi-axis SERCOS III machine network. Power section is three-phase at 400 V with ±10 % tolerance, or 230 V three-phase / single-phase at the same tolerance; the drive therefore fits both 400 V European and 230 V North American machine mains without a separate transformer stage. ## 5 A continuous, 15 A peak — sizing the motor match Continuous output current is 5 A at a 4 kHz switching frequency, with a 3-second peak of 15 A at 4 kHz; the drive covers mid-range servo motors where the cyclic overload demand sits well above the steady-state thermal current. Switching frequency is 8 kHz nominal, so the 4 kHz ratings above are the conservative thermal baseline — pushing the carrier higher trims motor acoustic noise but trades continuous-current headroom. ## STO over SERCOS III — safety and fieldbus wiring Fieldbus is SERCOS III on the integrated port, so the drive daisy-chains into a PacDrive 3 controller loop — the cabinet layout treats it as one node on the motion ring rather than a separately wired axis. ## Cabinet wiring — what lands where Connections land on four pluggable terminal blocks: CN4 (control, 0.2–15 mm² / AWG 24–16), CN5 (0.5–16 mm² / AWG 20–6), CN6 (0.75–16 mm² / AWG 18–6), and CN7 (0.2–6 mm² / AWG 24–10), with the CN1 motor-side stud torqued to 2.5 N·m — CN5/CN6 sized for the DC-bus / motor power leads, CN4/CN7 for 24 V control and I/O. Housing is IP20 to IEC 60529 — a control-cabinet rating only; the drive lives inside an enclosure, not on the machine frame. Ambient operating window is 5–55 °C, 5–85 % relative humidity, 3K3 class per IEC 60721-3-3, with shock 100 m/s² and vibration 10 m/s² to the same standard, overvoltage category III, pollution degree 2 per IEC 61800-5-2 — standard industrial cabinet environment, not a sealed washdown location.","metaTitle":"Schneider LXM62DD15A21000 servo drive, 5 A / 15 A, 400 V","metaDescription":"Schneider LXM62DD15A21000 PacDrive 3 LXM62 single drive, 5 A continuous / 15 A peak, 400 V three-phase, STO, SERCOS III. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Servo Drives"],"specifications":{"title":"LXM62DD15A21000","Standards":"IEC 61800-5-1 ISO 13849-1 IEC 61800-5-2 CSA C22.2 No 14 IEC 62061 IEC 61800-3 IEC 61508 ISO 13849-2 UL 508C","description":"SCHNEIDER LXM62DD15A21000 SERVO DRIVE","Component name":"LXM62","Safety function":"STO (safe torque off)","lifecycle_stage":"current","Number of inputs":"2 digital 2 touch probe","Pollution degree":"2 conforming to IEC 61800-5-2","Range of product":"PacDrive 3","Shock resistance":"100 m/s² conforming to IEC 60721-3-3","Supply frequency":"50/60 Hz - 5...5 %","Device short name":"LXM 62","Number of outputs":"2 digital","Relative humidity":"5...85 %","Tightening torque":"CN1: 2.5 N.m","Switching frequency":"8 kHz","Overvoltage category":"III","Vibration resistance":"10 m/s² conforming to IEC 60721-3-3","Electrical connection":"Terminal, clamping capacity: 0.2...15 mm², AWG 24...AWG 16 (CN4) Terminal, clamping capacity: 0.5...16 mm², AWG 20...AWG 6 (CN5) Terminal, clamping capacity: 0.75...16 mm², AWG 18...AWG 6 (CN6) Terminal, clamping capacity: 0.2...6 mm², AWG 24...AWG 10 (CN7)","Discrete input voltage":"24 V DC for - 20...25 %","Output current 3s peak":"15 A at 4 kHz","Communication interface":"SERCOS III, integrated","Discrete output voltage":"24 V DC","IP degree of protection":"IP20 conforming to IEC 60529","Network number of phases":"Three phase","Continuous output current":"5 A at 4 kHz","Product or component type":"Single drive","[Us] rated supply voltage":"400 V (- 10...10 %) for three phase 230 V (- 10...10 %) for three phase 230 V (- 10...10 %) for single phase","Environmental characteristic":"3K3 conforming to IEC 60721-3-3","Ambient air temperature for operation":"5...55 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5b4c911c28818b1e68ad8b647fafd72c.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What motor current can the LXM62DD15A21000 deliver?","answer":"Continuous output current is 5 A at 4 kHz, with a 3-second peak of 15 A at 4 kHz; the peak figure is what covers the cyclic overload demand of mid-range servo loads during accel/decel, while the 5 A continuous figure sets the thermal sizing limit."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXM62DD15A21000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXM62DD15A21000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}