{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXM62DD15G21000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXM62DD15G21000","canonicalUrl":"https://aoctrl.com/schneider/LXM62DD15G21000","factsUrl":"https://aoctrl.com/api/mcp/products/LXM62DD15G21000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 LXM62 single-axis servo drive, 2.4 kW continuous, 5 A at 4 kHz, 15 A peak, STO SIL 3 PL e, SERCOS III, 400 V three-phase, IP20, 44 x 310 x 270 mm.","salesMarkdown":"## Panel fit and power delivery The LXM62DD15G21000 is a single-axis servo drive from the PacDrive 3 family, sized at 44 mm wide by 310 mm high by 270 mm deep — a slim profile that fits standard 600 mm deep enclosures with room for gland plates and wiring ducts. Rated for 2.4 kW continuous power with a continuous output current of 5 A at 4 kHz switching frequency, and a 3-second peak of 15 A at 4 kHz — enough headroom to handle acceleration transients on a 2.4 kW servo motor without tripping. Supply voltage is 400 V three-phase (-10 to +10 %) or 230 V three-phase/single-phase, at 50/60 Hz ±5 %, so it works on both European 400 V line and North American 230 V installations without a transformer swap. ## Safety and compliance for guarded zones Hardware-based STO (safe torque off) is integrated, rated SIL 3 per IEC 61508 and PL e per ISO 13849-1 — this meets the highest safety integrity level for a drive, so it can be wired directly into a safety circuit without an external safety relay for the STO function. The drive carries approvals to CSA C22.2 No 14, UL 508C, IEC 61800-5-1, IEC 61800-5-2, and IEC 62061 — covering North American and European machinery safety standards for export or multi-site deployment. Pollution degree 2 per IEC 61800-5-2 means it's rated for normal factory-floor environments with only non-conductive dust — no special conformal coating needed for most panel installations. ## Communication and I/O for multi-axis lines Integrated SERCOS III interface handles real-time motion control over a ring or line topology — this is the standard for synchronized multi-axis systems in packaging, printing, and material handling, where cycle times under 1 ms per axis are expected. Two digital inputs, two touch-probe inputs, and two digital outputs at 24 V DC give enough local I/O for limit switches, home sensors, and fault feedback without an additional I/O module. ## Environmental ratings for cabinet placement IP20 protection means it's intended for clean, dry electrical enclosures — not for washdown or outdoor locations. Operating temperature range is 5 to 55 °C, with 5 to 85 % relative humidity non-condensing. Vibration resistance is 10 m/s² and shock resistance is 100 m/s² per IEC 60721-3-3, so it holds up on machines with moderate vibration like conveyors or packaging lines without additional damping mounts. Derate output current by 1 % per 100 m above 1000 m altitude — at a typical 2000 m installation, budget 10 % less continuous current than the 5 A rating.","metaTitle":"Schneider Electric LXM62DD15G21000 Servo Drive, 2.4 kW","metaDescription":"Active-production Schneider LXM62DD15G21000 PacDrive 3 servo drive, 2.4 kW continuous, 5 A at 4 kHz, STO SIL 3 PL e, SERCOS III, 400 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"Depth":"270 mm","Width":"44 mm","title":"LXM62DD15G21000","Height":"310 mm","Standards":"CSA C22.2 No 14 ISO 13849-2 IEC 61800-5-2 IEC 61800-3 IEC 62061 IEC 61800-5-1 ISO 13849-1 IEC 61508 UL 508C","description":"LXM62 Single Axis Servo Drive Advanced 15A, HW STO SIL 3 PLE, ACCKIT","Nominal power":"2.4 kW","Component name":"LXM62","Safety function":"STO (safe torque off)","lifecycle_stage":"current","Continuous power":"2.4 kW","Number of inputs":"2 digital 2 touch probe","Pollution degree":"2 conforming to IEC 61800-5-2","Range of product":"PacDrive 3","Shock resistance":"100 m/s² conforming to IEC 60721-3-3","Supply frequency":"50/60 Hz - 5...5 %","Device short name":"LXM 62","Number of outputs":"2 digital","Relative humidity":"5...85 %","Tightening torque":"CN1: 2.5 N.m","Operating altitude":"> 1000 m 1 % per 100 m","Switching frequency":"8 kHz","Overvoltage category":"III","Vibration resistance":"10 m/s² conforming to IEC 60721-3-3","Electrical connection":"Terminal, clamping capacity: 0.2...15 mm², AWG 24...AWG 16 (CN4) Terminal, clamping capacity: 0.5...16 mm², AWG 20...AWG 6 (CN5) Terminal, clamping capacity: 0.75...16 mm², AWG 18...AWG 6 (CN6) Terminal, clamping capacity: 0.2...6 mm², AWG 24...AWG 10 (CN7)","Discrete input voltage":"24 V DC for - 20...25 %","Output current 3s peak":"15 A at 4 kHz","Communication interface":"SERCOS III, integrated","Discrete output voltage":"24 V DC","IP degree of protection":"IP20 conforming to IEC 60529","Network number of phases":"Three phase","Continuous output current":"5 A at 4 kHz","Product or component type":"Single axis servo drive","[Us] rated supply voltage":"400 V (- 10...10 %) for three phase 230 V (- 10...10 %) for three phase 230 V (- 10...10 %) for single phase","Environmental characteristic":"3K3 conforming to IEC 60721-3-3","Ambient air temperature for operation":"5...55 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6c1da68a48d109c6354c1ab7183a5057.pdf","sourceUrl":"https://www.se.com/be/en/product/LXM62DD15G21000/lxm62-single-axis-servo-drive-advanced-15a-hw-sto-sil-3-ple-acckit/"},"ai":{"faq":[{"question":"What safety functions does the LXM62DD15G21000 include?","answer":"It includes hardware-based STO (safe torque off) rated SIL 3 per IEC 61508 and PL e per ISO 13849-1, which is the highest safety integrity level for a drive. This allows direct wiring into a safety circuit without an external safety relay for the STO function."},{"question":"What communication protocol does this drive use?","answer":"It uses integrated SERCOS III, a real-time Ethernet-based motion bus standard for synchronized multi-axis control in packaging, printing, and material handling applications."},{"question":"What are the key electrical ratings for the LXM62DD15G21000?","answer":"Continuous power is 2.4 kW, continuous output current is 5 A at 4 kHz switching frequency, and 3-second peak current is 15 A at 4 kHz. Supply voltage is 400 V three-phase or 230 V three-phase/single-phase at 50/60 Hz."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXM62DD15G21000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXM62DD15G21000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}