{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXM62DD45G21000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXM62DD45G21000","canonicalUrl":"https://aoctrl.com/schneider/LXM62DD45G21000","factsUrl":"https://aoctrl.com/api/mcp/products/LXM62DD45G21000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 LXM 62 single-axis servo drive, 9.6 kW, 20 A continuous at 4 kHz, 400 V three-phase, STO SIL 3 PL e, SERCOS III, ACCKIT.","salesMarkdown":"## Where it sits on the machine The LXM62DD45G21000: The LXM 62 is a single-axis servo drive in the PacDrive 3 family, sized for machines that need a deterministic SERCOS III motion loop with on-board safety rather than a generic VFD on a multi-axis line. Continuous output is 20 A at the 4 kHz switching-frequency default; the 45 A peak for 3 s at the same carrier is the headroom the motion profile can draw during acceleration and deceleration, not the steady-state load — sizing matches the continuous figure to the motor's rated current and uses the peak for the mechanical inertia calculation. Supply acceptance runs 400 V three-phase (-10…10 %) or 230 V three- or single-phase on the same unit, at 50/60 Hz with ±5 % tolerance, so the drive drops into both 400 V European machine-tool cabinets and 230 V single-phase utility feeds on packaging lines without a transformer tap. ## Safety stack and motion I/O STO (safe torque off) is integrated to SIL 3 / PL e per IEC 62061, ISO 13849-1 and IEC 61800-5-2, which means the drive removes torque from the motor without cutting the DC bus — guarding circuits on a PacDrive 3 cell can wire directly to the drive instead of a contactor upstream, provided the risk assessment supports the architecture. Discrete I/O is light by design: two digital inputs, two touch-probe inputs, and two digital outputs at 24 V DC with a -20…25 % input window, so high-speed probe and camera-trigger signals ride on the drive and slower field I/O lives on the PacDrive controller — don't plan a PLC-class point count against this unit. ## Cabinet-side fit The chassis measures 44 mm wide × 270 mm deep × 310 mm tall, which is the side-by-side mounting footprint in the PacDrive 3 cabinet system — depth matters more than width here because the CN5/CN6 motor terminals (AWG 6 / 16 mm² clamping) need the cable bend room behind the drive. Ambient air temperature for operation is 5…55 °C with derating above 1000 m at 1 % per 100 m of altitude, and the cabinet has to hold IP20 mounting so the ventilation slots stay clear of debris; vibration and shock profiles (10 m/s² / 100 m/s² per IEC 60721-3-3, class 3K3 environmental) match a machine cabinet, not a moving platform. ## Sourcing posture for the storeroom For an MRO storeroom, this is a long-tail servo drive rather than a fast mover: pairing the drive with its ACCKIT and the matching PacDrive controller is part of the BOM line, not the drive alone.","metaTitle":"LXM62DD45G21000 PacDrive 3 Servo Drive, 9.6 kW, 20 A","metaDescription":"Schneider PacDrive 3 LXM62 single-axis servo drive, 9.6 kW, 20 A continuous at 4 kHz, STO SIL3 PL e, SERCOS III, quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"Depth":"270 mm","Width":"44 mm","title":"LXM62DD45G21000","Height":"310 mm","Standards":"CSA C22.2 No 14 ISO 13849-2 IEC 61800-5-2 IEC 61800-3 IEC 62061 IEC 61800-5-1 ISO 13849-1 IEC 61508 UL 508C","description":"LXM62 Single Axis Servo Drive Advanced 45A, HW STO SIL 3 PLE, ACCKIT","Nominal power":"9.6 kW","Component name":"LXM62","Safety function":"STO (safe torque off)","lifecycle_stage":"current","Continuous power":"9.6 kW","Number of inputs":"2 digital 2 touch probe","Pollution degree":"2 conforming to IEC 61800-5-2","Range of product":"PacDrive 3","Shock resistance":"100 m/s² conforming to IEC 60721-3-3","Supply frequency":"50/60 Hz - 5...5 %","Device short name":"LXM 62","Number of outputs":"2 digital","Relative humidity":"5...85 %","Tightening torque":"CN1: 2.5 N.m","Operating altitude":"> 1000 m 1 % per 100 m","Switching frequency":"8 kHz","Overvoltage category":"III","Vibration resistance":"10 m/s² conforming to IEC 60721-3-3","Electrical connection":"Terminal, clamping capacity: 0.2...15 mm², AWG 24...AWG 16 (CN4) Terminal, clamping capacity: 0.5...16 mm², AWG 20...AWG 6 (CN5) Terminal, clamping capacity: 0.75...16 mm², AWG 18...AWG 6 (CN6) Terminal, clamping capacity: 0.2...6 mm², AWG 24...AWG 10 (CN7)","Discrete input voltage":"24 V DC for - 20...25 %","Output current 3s peak":"45 A at 4 kHz","Communication interface":"SERCOS III, integrated","Discrete output voltage":"24 V DC","IP degree of protection":"IP20 conforming to IEC 60529","Network number of phases":"Three phase","Continuous output current":"20 A at 4 kHz","Product or component type":"Single axis servo drive","[Us] rated supply voltage":"400 V (- 10...10 %) for three phase 230 V (- 10...10 %) for three phase 230 V (- 10...10 %) for single phase","Environmental characteristic":"3K3 conforming to IEC 60721-3-3","Ambient air temperature for operation":"5...55 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4,177.44","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/LXM62DD45G21000/lxm62-single-axis-servo-drive-advanced-45a-hw-sto-sil-3-ple-acckit/"},"ai":{"faq":[{"question":"What compliance documentation ships with the LXM62DD45G21000?","answer":"The drive carries the standards bundle listed in the spec sheet: CSA C22.2 No 14, UL 508C, IEC 61800-3 (EMC), IEC 61800-5-1 (safety of power drive systems), IEC 62061 and IEC 61508 (functional safety), and ISO 13849-1/-2. Declarations of Conformity and the product manual are sourced from the manufacturer at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXM62DD45G21000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXM62DD45G21000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}