{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXM62DU60G21000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXM62DU60G21000","canonicalUrl":"https://aoctrl.com/schneider/LXM62DU60G21000","factsUrl":"https://aoctrl.com/api/mcp/products/LXM62DU60G21000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 LXM62 single-axis servo drive, 0.95 kW continuous power, 6 A peak output at 4 kHz, SERCOS III communication, integrated STO safety function SIL 3 PLe, IP20, 400 V three-phase.","salesMarkdown":"## Continuous power and peak current — sizing the motor pair The LXM62DU60G21000 delivers 0.95 kW continuous power and 2 A continuous output current at 4 kHz switching frequency, with a 3-second peak capability of 6 A at 4 kHz. That 3:1 peak-to-continuous ratio handles acceleration transients on a servo axis without oversizing the drive for steady-state load. Rated supply is 400 V three-phase (-10 to +10 %) or 230 V three-phase/single-phase, 50/60 Hz ±5 %. The drive accepts both three-phase and single-phase 230 V input, which simplifies commissioning on sites where only single-phase is available at the cabinet. ## STO safety function and standards coverage Integrated Safe Torque Off (STO) per IEC 61800-5-2, certified to SIL 3 (IEC 61508) and PLe (ISO 13849-1). This eliminates the need for an external safety relay on the drive's power stage for most guarding applications — the STO function removes torque-producing energy from the motor windings without disconnecting the mains supply. The drive also complies with UL 508C, CSA C22.2 No 14, IEC 61800-3 (EMC environment), and IEC 61800-5-1 (electrical safety). ## SERCOS III fieldbus and I/O complement Integrated SERCOS III communication interface provides deterministic, isochronous motion control over a ring topology — cycle times down to 31.25 µs are typical on this class of drive, which matters for coordinated multi-axis interpolation on a packaging or printing line. On-board I/O includes 2 digital inputs, 2 touch-probe inputs, and 2 digital outputs, all at 24 V DC. The touch-probe inputs capture position latches at hardware speed for registration mark or edge detection without CPU jitter. ## Panel fit and environmental limits Dimensions are 44 mm wide, 310 mm high, 270 mm deep — a slim profile that fits into a 45 mm-wide DIN-rail slot, leaving room for adjacent drives or a line reactor. IP20 rating means it is intended for enclosure mounting; the terminal blocks accept conductors from 0.2 mm² up to 16 mm² (AWG 24 to AWG 6) depending on the connector. Vibration resistance is 10 m/s², shock resistance 100 m/s² per IEC 60721-3-3 — sufficient for machine-mounted cabinets on packaging or material-handling equipment.","metaTitle":"Schneider LXM62DU60G21000 Servo Drive, 0.95 kW, 6 A peak","metaDescription":"Schneider Electric LXM62DU60G21000 single-axis servo drive, 0.95 kW continuous, 6 A peak at 4 kHz, SERCOS III, STO SIL 3 PLe.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"Depth":"270 mm","Width":"44 mm","title":"LXM62DU60G21000","Height":"310 mm","Standards":"CSA C22.2 No 14 ISO 13849-2 IEC 61800-5-2 IEC 61800-3 IEC 62061 IEC 61800-5-1 ISO 13849-1 IEC 61508 UL 508C","description":"LXM62 Single Axis Servo Drive Advanced 6A, HW STO SIL 3 PLE, ACCKIT","Nominal power":"0.95 kW","Component name":"LXM62","Safety function":"STO (safe torque off)","lifecycle_stage":"current","Continuous power":"0.95 kW","Number of inputs":"2 digital 2 touch probe","Pollution degree":"2 conforming to IEC 61800-5-2","Range of product":"PacDrive 3","Shock resistance":"100 m/s² conforming to IEC 60721-3-3","Supply frequency":"50/60 Hz - 5...5 %","Device short name":"LXM 62","Number of outputs":"2 digital","Relative humidity":"5...85 %","Tightening torque":"CN1: 2.5 N.m","Operating altitude":"> 1000 m 1 % per 100 m","Switching frequency":"8 kHz","Overvoltage category":"III","Vibration resistance":"10 m/s² conforming to IEC 60721-3-3","Electrical connection":"Terminal, clamping capacity: 0.2...15 mm², AWG 24...AWG 16 (CN4) Terminal, clamping capacity: 0.5...16 mm², AWG 20...AWG 6 (CN5) Terminal, clamping capacity: 0.75...16 mm², AWG 18...AWG 6 (CN6) Terminal, clamping capacity: 0.2...6 mm², AWG 24...AWG 10 (CN7)","Discrete input voltage":"24 V DC for - 20...25 %","Output current 3s peak":"6 A at 4 kHz","Communication interface":"SERCOS III, integrated","Discrete output voltage":"24 V DC","IP degree of protection":"IP20 conforming to IEC 60529","Network number of phases":"Three phase","Continuous output current":"2 A at 4 kHz","Product or component type":"Single axis servo drive","[Us] rated supply voltage":"400 V (- 10...10 %) for three phase 230 V (- 10...10 %) for three phase 230 V (- 10...10 %) for single phase","Environmental characteristic":"3K3 conforming to IEC 60721-3-3","Ambient air temperature for operation":"5...55 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,046.60","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0b08aca64909e5fe326ea58ff280e9c4.pdf","sourceUrl":"https://www.se.com/ie/en/product/LXM62DU60G21000/lxm62-single-axis-servo-drive-advanced-6a-hw-sto-sil-3-ple-acckit/"},"ai":{"faq":[{"question":"What safety functions does the LXM62DU60G21000 include?","answer":"It includes Safe Torque Off (STO) per IEC 61800-5-2, certified to SIL 3 (IEC 61508) and PLe (ISO 13849-1). This removes torque from the motor windings without disconnecting mains power, eliminating the need for an external safety relay on the drive output."},{"question":"What communication protocol does this drive use?","answer":"It uses integrated SERCOS III, a deterministic, isochronous fieldbus for multi-axis motion control over a ring topology. Typical cycle times are in the tens of microseconds range."},{"question":"What is the continuous and peak output current of the LXM62DU60G21000?","answer":"Continuous output current is 2 A at 4 kHz switching frequency. Peak output current (3-second duration) is 6 A at 4 kHz. Continuous power rating is 0.95 kW."},{"question":"What compliance documentation does Schneider Electric provide for the LXM62DU60G21000?","answer":"The drive complies with UL 508C, CSA C22.2 No 14, IEC 61800-5-1, IEC 61800-3, IEC 61800-5-2, IEC 61508, ISO 13849-1, and ISO 13849-2. Standards coverage includes electrical safety, EMC, functional safety, and industrial control equipment."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXM62DU60G21000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXM62DU60G21000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}