{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LXMSTS60F200000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LXMSTS60F200000","canonicalUrl":"https://aoctrl.com/schneider/LXMSTS60F200000","factsUrl":"https://aoctrl.com/api/mcp/products/LXMSTS60F200000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 STS60 SCARA robot, 4-axis, 8 kg payload, ±0.01 mm repeatability, ball-screw 200 mm vertical, floor-mount variant, part LXMSTS60F200000.","salesMarkdown":"## PacDrive 3 SCARA, four axes, 8 kg on the wrist The LXMSTS60F200000: Schneider lists this part number as obsolete, so a fresh BOM line gets quoted against independent channel stock rather than a factory PO; confirm the variant suffix (floor-mount, ball screw 200, user I/O cable) matches the cell layout before committing. It rides under the Servo Drives category even though it is a complete robot arm — the PacDrive 3 ecosystem ties the kinematics, servo loop and safety logic into the same controller family as the rest of the line. ## Motion envelope and what the speed numbers actually mean Angular speed is specified per axis rather than as a single headline figure: nominal 1200°/s on axis 4 with a maximum of 1929°/s, versus 385°/s nominal / 490°/s maximum on axis 1 and 500°/s nominal / 610°/s maximum on axis 2 — meaning the wrist joint runs hardest in short-index moves while the shoulder carries the slower, higher-torque arcs. Linear travel on the horizontal planes is 6.39 m/s on axes 1 and 2 with a 2000 mm/s rated speed on axis 3, and the maximum actuation speed reaches 8.01 m/s horizontally; vertical travel is rated 0...200 mm (0...7.9 in) and horizontal travel 0...1200 mm (0...47.2 in), so the cycle-time budget needs to fit inside that envelope. Repeatability is ±0.01 mm — enough for screwdriving, dispensing and small-parts insertion where the cell treats each pick as a single repeatable event rather than a vision-corrected one. ## Mounting, orientation and what drops into a PacDrive 3 cell The arm is rated for rotational 360° orientation on the floor-mount variant, with the controller and servo loop belonging to the PacDrive 3 family — so existing Lexium STS cells can usually meet the new arm where it is, provided the controller firmware slot, safety configuration and user I/O cable bundle match the original PacDrive 3 deployment. One unit per package — verify the controller and the user I/O cable are on the same RFQ as the arm itself, since the headline order code covers the mechanical assembly and the field wiring is typically broken out as a separate line. ## Sourcing reality for an obsolete SCARA arm Schneider's own status flag on this MPN is Obsolete, which puts the supply path on independent distribution and surplus channels: quoted to order against the BOM, with availability, condition (factory-sealed versus refurb) and lead time confirmed at RFQ rather than promised from stock. No official successor order code ships with the record on this MPN — any replacement is a different mechanical/control package in a later PacDrive generation, which is a tooling and program change rather than a like-for-like swap.","metaTitle":"LXMSTS60F200000 Schneider SCARA Robot, 4-axis, 8 kg","metaDescription":"Schneider Electric LXMSTS60F200000 PacDrive 3 SCARA robot, 4-axis, 8 kg payload, repeatability ±0.01 mm. Obsolete — quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Drives"],"specifications":{"Category":"US1PC5218357","Angular speed":"1200°/s nominal axis 4 1929°/s maximum axis 4 385°/s nominal axis 1 490°/s maximum axis 1 500°/s nominal axis 2 610°/s maximum axis 2","Nominal speed":"2000 mm/s axis 3 6.39 m/s axis 1 6.39 m/s axis 2","Number of axis":"4","Repeat accuracy":"+/- 0.01 mm","lifecycle_stage":"current","Operating travel":"0...7.9 in (0...200 mm) vertical 0...47.2 in (0...1200 mm) horizontal","Range of Product":"PacDrive 3","Device short name":"STS60","Operating position":"Rotational 360°","Nbr. of units in pkg.":"1","Maximum actuation speed":"2220 mm/s axis 3 26.28 ft/s (8.01 m/s) axis 1 26.28 ft/s (8.01 m/s) axis 2","Product or Component Type":"SCARA robot","Permanent permissible load":"17.6 lb(US) (8 kg)","Environmental characteristic":"Normal environment"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5e465334d39d1bbabab7436700591a50.pdf","sourceUrl":"https://www.se.com/us/en/product/LXMSTS60F200000/sts60-floor-ball-screw-200-user-i-o-cable/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LXMSTS60F200000/alternatives.json"},"ai":{"faq":[{"question":"What is the LXMSTS60F200000's listed angular speed per axis?","answer":"Per the published spec, axis 4 is rated 1200°/s nominal and 1929°/s maximum, axis 1 is 385°/s nominal and 490°/s maximum, and axis 2 is 500°/s nominal and 610°/s maximum — wrist runs faster than shoulder for short-index cycles."},{"question":"What repeatability and payload does the LXMSTS60F200000 carry?","answer":"Repeatability is ±0.01 mm and the permanent permissible load is 8 kg (17.6 lb) — appropriate for screwdriving, dispensing and small-parts assembly where the cell treats each cycle as a single repeatable event."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LXMSTS60F200000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LXMSTS60F200000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}