{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"METSEEM3570X","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"METSEEM3570X","canonicalUrl":"https://aoctrl.com/schneider/METSEEM3570X","factsUrl":"https://aoctrl.com/api/mcp/products/METSEEM3570X","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PowerLogic EM3570 series, METSEEM3570X electronic multi-function meter, Class 0.5 accuracy, 90...347 V L-N supply, clip-on DIN-rail mount, 32 GB memory, 1 relay output, white.","salesMarkdown":"The Schneider Electric METSEEM3570X is a PowerLogic EM3570 series electronic multi-function panel meter, built for sub-billing, multi-tariff, and partial metering applications. It clips onto a DIN rail inside a stationary indoor panel and accepts low-voltage current transformer inputs at 0.333 V or 1 V, measuring current from 1 A up to 32767 A through external CTs. The Class 0.5 accuracy on active energy (per IEC 61557-12 and ANSI C12.20) means it delivers billing-grade readings — good enough for tenant sub-metering or energy allocation where you need better than a panel indicator but aren't paying for a revenue-certified meter. The supply input handles 90...347 V phase-to-neutral or 156...600 V phase-to-phase, so it can run directly off a 120/208 V or 277/480 V panel without a step-down transformer. Network frequency is 50/60 Hz ± 10 % — covers both legacy 60 Hz plants and 50 Hz sites. The 32 GB internal memory logs energy consumption, demand intervals (sliding, fixed, or rolling block), and time-stamped data logs; that's enough storage for months of interval data at typical recording rates. A single relay output is available for alarm or pulse output. The backlit LCD display shows 5 digits at 126 x 94 pixels resolution, readable in a dim MCC room. ## Mounting and installation Clip-on DIN-rail mount per the standard 35 mm rail. Dimensions are 3.5 in wide by 3.6 in tall by 2.8 in deep (90 x 91.4 x 70.6 mm) — it takes up about three standard single-pole breaker spaces. Terminal torque specs: voltage and input circuits at 4.4 lbf·in (0.5 N·m), current and supply circuits at 7.08 lbf·in (0.8 N·m). Pollution degree 2 — suitable for a clean, dry control room or switchgear lineup, but not for wet or conductive-dust environments. Operating altitude up to 3000 m, so it's fine for most plants outside high-mountain sites.","metaTitle":"Schneider Electric METSEEM3570X PowerLogic EM3570, Class 0.5","metaDescription":"Schneider Electric METSEEM3570X PowerLogic EM3570 panel meter. Class 0.5 accuracy, 32 GB memory, 1-32767 A CT input, DIN-rail mount. Current production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["1-Pole MCB (DIN Rail)"],"specifications":{"Color":"White","Depth":"2.8 in (70.6 mm)","Range":"PowerLogic","Width":"3.5 in (90 mm)","Height":"3.6 in (91.4 mm)","Category":"US10PL109798","Standards":"IEC 61557-12 EN 61557-12 BS EN 61557-12 IEC 61326-1 EN 61326-1 BS EN 61326-1 IEC 61010-1 EN 61010-1 BS EN 61010-1 IEC 61010-2-30 EN 61010-2-30 BS EN 61010-2-30 UL 61010-1 UL 61010-2-30 UL 2808 CSA C22.2 No 61010-1-12 CSA C22.2 No 61010-2-30","Input Type":"Low voltage current transformer 0.333 V or 1 V","Buffer size":"16-bit 10","Display Type":"Backlit LCD","Service life":"15 year(s) 113 °F (45 °C) 60% RH","Web services":"Real time viewing of data Network and protocol setting Data and time IP filtering","Metering type":"Peak demand power PM, QM, SM Current I1, I2, I3, Iavg Active, reactive, apparent energy (signed, four quadrant) Demand power P, Q, S Voltage U21, U32, U13, V1, V2, V3 Calculated neutral current","Mounting Mode":"Clip-on","Rated voltage":"90...347 V phase to neutral (L-N)) 156...600 V phase to phase (L-L))","Accuracy class":"Class 0.5 power IEC 61557-12 Class 0.5 energy IEC 61557-12 Class 0.5 power ANSI C12.20 Class 0.5 energy ANSI C12.20","Data recording":"Energy consumption logs Time stamping Data logs","Display digits":"5","Memory capacity":"32 GB","Technology Type":"Electronic","lifecycle_stage":"current","Demand intervals":"External synchronisation to communication Sliding/fixed/rolling block","Local signalling":"Orange LED alarm / energy Green flashing LED operating state","Mounting Support":"DIN rail","Pollution degree":"2","Range Of Product":"PowerLogic EM3570","Device short name":"EM3570X","Network frequency":"60 Hz +/- 10 % 50 Hz +/- 10 %","Number of Outputs":"1 relay output","Poles description":"3P + N 2P + N 1P + N 3P","Relative humidity":"5...95 %","Tightening torque":"Current circuit: 7.08 lbf.in (0.8 N.m) Voltage circuit: 4.4 lbf.in (0.5 N.m) Input circuit: 4.4 lbf.in (0.5 N.m) Supply circuit: 7.08 lbf.in (0.8 N.m) Relay output: 7.08 lbf.in (0.8 N.m)","Device Application":"Partial meter Sub billing Multi-tariff","Display Resolution":"126 x 94 pixels","Operating altitude":"<= 9842.52 ft (3000 m)","Measurement current":"1...32767 A","Type of measurement":"Active and reactive power total Active and reactive power per phase Apparent power total Apparent power per phase Power factor total Power factor per phase Peak demand power Current Voltage Frequency Starting current selection range","Measurement accuracy":"Active energy +/- 0.5 % Reactive energy +/- 2 % Reactive power +/- 2 % Apparent energy +/- 0.5 % Apparent power +/- 0.5 % Power factor +/- 0.005 Frequency +/- 0.5 % Voltage +/- 0.5 % Current +/- 0.5 %","Type of Installation":"For indoor use in a stationary panel","Communication Service":"Syslog protocol support","Information displayed":"Status and alert Communication IP address Input/output status Error Alarms Instant power per usage Firmware info Configurable summary page (average, total, demand, nominal values)","Nbr. of units in pkg.":"1","Power consumption in W":"5 W","Connections - terminals":"Current circuit screw terminals 0.009 in² (6 mm²) Voltage circuit screw terminals 0.002 in² (1.5 mm²) Input circuit screw terminals 0.009 in² (6 mm²) Supply circuit screw terminals 0.006 in² (4 mm²) Relay output screw terminals 0.002 in² (1.5 mm²)","IP degree of protection":"IP20 meter: IP40 display:","Tamperproof of settings":"Protected by access code","Product or Component Type":"Energy meter","Communication port support":"RJ45","Communication port protocol":"Modbus TCP/IP BACnet IP HTTPS SNMP SNTP Link Layer Discovery Protocol","Number Of Accumulator Inputs":"2 digital","[Ue] rated operational voltage":"12...36 V DC","Ambient Air Temperature for Storage":"-40...185 °F (-40...85 °C)","Ambient air temperature for operation":"-13...158 °F (-25...70 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/METSEEM3570X/din-rail-meter-powerlogic-em3570-ethernet-lvdc-lvct-input/","alternativesUrl":"https://aoctrl.com/api/mcp/products/METSEEM3570X/alternatives.json"},"ai":{"faq":[{"question":"What is the measurement accuracy of the METSEEM3570X?","answer":"Active energy accuracy is ±0.5 %, matching Class 0.5 per IEC 61557-12 and ANSI C12.20. Voltage and current accuracy are also ±0.5 %, while reactive energy is ±2 %."},{"question":"What current range does the METSEEM3570X measure?","answer":"It measures from 1 A to 32767 A through external low-voltage CTs (0.333 V or 1 V secondary). The meter itself does not carry primary current; it reads the CT secondary voltage."},{"question":"Where can I buy the METSEEM3570X and get a price?","answer":"This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm quote."},{"question":"What compliance documentation does the METSEEM3570X carry?","answer":"It is certified to IEC 61557-12, EN 61557-12, IEC 61326-1, IEC 61010-1, IEC 61010-2-30, UL 61010-1, UL 2808, and CSA C22.2 No 61010-1-12. These cover safety, EMC, and performance standards for panel-mounted metering equipment."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/METSEEM3570X","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/METSEEM3570X when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}