{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MGP1003NAX","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MGP1003NAX","canonicalUrl":"https://aoctrl.com/schneider/MGP1003NAX","factsUrl":"https://aoctrl.com/api/mcp/products/MGP1003NAX","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PowerPacT 4, switch disconnector, MGP1003NAX, 3P, 100 A, 415 V AC, toggle control, backplate mount.","salesMarkdown":"The MGP1003NAX is classified as obsolete by the manufacturer. Rated 100 A and certified to BS EN 60947-3 for isolation, this 3-pole switch disconnector is intended for use as a visible-break isolator in panelboard feeders up to 250 A or 400/630 A panelboard mains. The utilisation categories AC-22A and AC-23A cover switching of mixed resistive and inductive loads, including motor loads within the rated current — AC-23A specifically permits switching of motors and other highly inductive loads. DC-22A and DC-23A extend the same capability to DC circuits. The short-time withstand current rating of 1600 A for 1 s (1800 A for 3 s, 690 A for 20 s) defines the fault-current duration the switch can carry without damage — critical for selective coordination in a distribution board. The rated short-circuit making capacity of 2.6 kA peak confirms it can close onto a fault without welding contacts. The IP40 enclosure protection keeps tools and fingers out but is not washdown-rated; the backplate mount is standard for panelboard integration. Electrical durability is specified at 35,000 cycles at 440 V at In/2 and 20,000 cycles at 440 V at In — this is the contact life under load, not the mechanical life of 50,000 cycles. The toggle control provides a clear visual contact-position indicator, confirming the isolation state required by BS EN 60947-3. Certified to BS EN 60947-3, the standard for switch-disconnectors and fuse-combination units. Class II electrical shock protection means no protective earth connection is required on the device enclosure. The storage temperature range of -50 to 85 °C and operating range of -25 to 70 °C cover most panel environments.","metaTitle":"MGP1003NAX PowerPacT 4 Switch Disconnector, 100 A, 3P","metaDescription":"Obsolete Schneider Electric MGP1003NAX PowerPacT 4 switch disconnector, 100 A, 3P, 415 V AC. Sourced to order against RFQ. Certified to BS EN 60947-3 for isolation.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Miniature Circuit Breakers (MCB)"],"specifications":{"Range":"PowerPact","Depth (D)":"86 mm","Standards":"BS EN 60947-3","Width (W)":"105 mm","Height (H)":"161 mm","Control type":"Toggle","lifecycle_stage":"current","Mounting support":"Backplate","Pollution degree":"3 conforming to EN/IEC 60664-1","Range of product":"PowerPacT 4","Poles description":"3P","Device application":"Isolation","[In] rated current":"100 A","Product destination":"250 A panelboard 400/630 A panelboard","Utilisation category":"AC-22A AC-23A DC-22A DC-23A","Electrical durability":"35000 cycles 440 V In/2 20000 cycles 440 V In","Mechanical durability":"50000 cycles","Breaking capacity code":"NA","IK degree of protection":"IK07 conforming to EN/IEC 62262","IP degree of protection":"IP40 conforming to EN/IEC 60529","Earth-leakage protection":"Without","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to BS EN 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"800 V AC 50/60 Hz","[Ue] rated operational voltage":"415 V AC 50/60 Hz","Electrical shock protection class":"Class II","Ambient air temperature for storage":"-50...85 °C","Ambient air temperature for operation":"-25...70 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1600 A during 1 s 1800 A during 3 s 690 A during 20 s","[Icm] rated short-circuit making capacity":"2.6 kA peak"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0d9982e4ff48f5312c507ddc0aa7701e.pdf","sourceUrl":"https://www.se.com/ie/en/product/MGP1003NAX/switch-disconnector-powerpact-4-3p-100a/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MGP1003NAX/alternatives.json"},"ai":{"faq":[{"question":"What is the MGP1003NAX used for?","answer":"It is a 100 A, 3-pole switch disconnector certified to BS EN 60947-3 for isolation in panelboard feeders and mains up to 630 A panelboard systems."},{"question":"What compliance documentation does Schneider Electric provide for MGP1003NAX?","answer":"The switch is certified to BS EN 60947-3, carries a Class II shock protection rating, and is rated for pollution degree 3 per EN/IEC 60664-1. Documentation includes the declaration of conformity for these standards."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MGP1003NAX","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MGP1003NAX when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}