{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30701P01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30701P01F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30701P01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30701P01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30701P01F2200 servo motor with brake, 930 W continuous power, three-phase, IP65, single-turn SinCos Hiperface encoder, 70 mm flange, smooth shaft.","salesMarkdown":"## Motor dimensions and mounting — fits the standard 70 mm flange The MH30701P01F2200 carries a 70 mm flange (2.8 in) with a 60 mm centring collar and 5.5 mm mounting holes, so it bolts directly to any standard IEC 70 mm motor mount without an adapter plate. Overall body length is 161 mm (6.3 in) with a smooth shaft 11 mm in diameter and 23 mm of usable shaft length — enough to couple to most inline gearboxes or pulleys without shaft modification. Continuous stall torque is 1.4 N·m (12.4 lbf·in) across the full 115–480 V three-phase range, and the holding brake locks at 3 N·m (26.6 lbf·in) — enough to hold a vertical load without a separate mechanical brake, as long as the load torque stays under that figure. Nominal speed depends on the drive supply: 1250 rpm at 115 V single-phase, 3000 rpm at 230 V, 5500 rpm at 400 V three-phase, and 7000 rpm at 480 V three-phase. The maximum mechanical speed is 8000 rpm, so the motor can overshoot briefly during a fast stop without damaging the rotor. Peak stall torque reaches 4.2 N·m (37.2 lbf·in) at any three-phase voltage — that is 3× the continuous rating, giving headroom for acceleration or short-duration overloads without tripping the drive. ## Encoder and feedback — single-turn Hiperface for position loops The single-turn SinCos Hiperface encoder provides absolute position within one revolution and analogue sine/cosine tracks for high-resolution velocity feedback. ## Environmental protection and cooling — IP65 with natural convection IP65 rating means the motor housing and shaft seal resist dust ingress and low-pressure water jets from any direction — suitable for washdown areas in food processing or for dusty packaging lines. No forced cooling fan means no fan noise and no filter to clean, but the 930 W continuous rating assumes free air around the motor; derating applies if it is boxed in. The rotatable right-angled connectors let the cable exit in any of four directions, so the motor fits tight enclosures without a hard 90° cable bend. No official successor or cross-reference is listed, so this is the direct replacement for any existing MH3-series installation. The part number is the braked variant (MH30701P01F2200); the non-braked version uses a different order code.","metaTitle":"Schneider Electric MH30701P01F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30701P01F2200 servo motor with brake, 930 W continuous power, 3-phase, IP65, single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.3 in (161 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1250 rpm LXM52 1.75 mA, 115 V, single phase 3000 rpm LXM52 1.75 mA, 230 V, single phase 5500 rpm LXM52 1.72 mA, 400 V, three phase 7000 rpm LXM52 1.7 mA, 480 V, three phase 1250 rpm LXM62 1.75 mA, 115 V, single phase 3000 rpm LXM62 1.75 mA, 230 V, single phase 5500 rpm LXM62 1.72 mA, 400 V, three phase 7000 rpm LXM62 1.7 mA, 480 V, three phase","Rotor inertia":"0.7 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.21 lbf.in (1.38 N.m) LXM52 1.75 mA, 115 V, three phase 11.86 lbf.in (1.34 N.m) LXM52 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM52 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM52 1.7 mA, 480 V, three phase 12.21 lbf.in (1.38 N.m) LXM62 1.75 mA, 115 V, single phase 11.86 lbf.in (1.34 N.m) LXM62 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM62 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM62 1.7 mA, 480 V, three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.79 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"930 W","Mounting Support":"International standard flange","Sizing reference":"MH30701P","Back emf constant":"50.72 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"37.2 lbf.in (4.2 N.m), 115...480 V, three phase","Stator inductance":"23.4 mH","Stator resistance":"8.28 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.97 A","Nominal output power":"0.18 W, 115 V 0.42 W, 230 V 0.75 W, 400 V 0.93 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"12.4 lbf.in (1.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.78 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"2.8 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/356e0ac98a2e77fa25c7c0bdc3b24979.pdf","sourceUrl":"https://www.se.com/ca/en/product/MH30701P01F2200/servo-motor-mh3-070-14nmno-keysingleno-brakeip65-ip676krpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30701P01F2200/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for the MH30701P01F2200?","answer":"Submit an RFQ through the storefront; the sourcing desk will respond with a firm price, lead time, and any volume breaks from authorized Schneider distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30701P01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30701P01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}