{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30701P06F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30701P06F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30701P06F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30701P06F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30701P06F2200, MH3 series servo motor with holding brake, 930 W continuous, 3-phase, IP65, single-turn SinCos Hiperface encoder, smooth shaft, 70 mm flange.","salesMarkdown":"## 930 W continuous power — sizing the drive match The MH30701P06F2200 delivers 930 W continuous power from a three-phase supply, which sets the minimum drive current rating. The continuous stall current is 1.78 A, and the maximum RMS current hits 5.97 A — the drive's continuous and peak output must cover both numbers without tripping into current limit. ## Holding brake and encoder — what's built in The holding brake delivers 3 N·m holding torque and pulls in at 7 W. That brake holds the load on a vertical axis when power drops — no external mechanical brake needed. The brake release voltage must match the drive's brake control output; the 7 W coil is a DC solenoid, so the drive's brake chopper or external relay handles the switching. Feedback comes from a single-turn SinCos Hiperface encoder. This is an analog sine-cosine encoder with a serial comms channel for position data — it works with Schneider LXM52/LXM62 drives natively, and with third-party drives that support the Hiperface protocol. Single-turn means absolute position within one revolution; multi-turn applications need a different encoder option. ## IP65 enclosure and shaft — washdown-ready IP65 standard means the motor body is dust-tight and protected against low-pressure water jets from any direction. That's enough for washdown in food processing or wet machining lines, but not for submersion or high-pressure spray (IP66/IP67 would cover that). Smooth shaft, 11 mm diameter, 23 mm length — no keyway. The smooth shaft means the coupling or pulley clamps onto the shaft with a set-screw or friction lock; no keyseat to align. The 70 mm flange (2.8 in) is an international standard flange, so it bolts to common gearbox and mounting brackets without adapters. ## Thermal limits and torque derating The torque constant is 0.79 N·m/A at 120 °C copper temperature — that's the hot-winding value, not the cold start. Continuous stall torque is 1.4 N·m across the 115–480 V range, and peak stall torque hits 4.2 N·m. The stator resistance is 8.28 Ω and inductance 23.4 mH; the drive's current loop gains should be tuned for these values, especially on longer motor cables where the cable capacitance adds to the load. Natural convection cooling — no fan. The 930 W continuous rating assumes free air around the motor body; mounting it in a confined space or against a heat sink reduces the duty cycle. Maximum mechanical speed is 8000 rpm, but the torque available above 3000 rpm drops as the radial force limit tightens (460 N at 3000 rpm vs 360 N at 6000 rpm).","metaTitle":"Schneider Electric MH30701P06F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30701P06F2200 servo motor with brake, 930 W continuous power, 3-phase, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.3 in (161 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1250 rpm LXM52 1.75 mA, 115 V, single phase 3000 rpm LXM52 1.75 mA, 230 V, single phase 5500 rpm LXM52 1.72 mA, 400 V, three phase 7000 rpm LXM52 1.7 mA, 480 V, three phase 1250 rpm LXM62 1.75 mA, 115 V, single phase 3000 rpm LXM62 1.75 mA, 230 V, single phase 5500 rpm LXM62 1.72 mA, 400 V, three phase 7000 rpm LXM62 1.7 mA, 480 V, three phase","Rotor inertia":"0.7 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.21 lbf.in (1.38 N.m) LXM52 1.75 mA, 115 V, three phase 11.86 lbf.in (1.34 N.m) LXM52 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM52 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM52 1.7 mA, 480 V, three phase 12.21 lbf.in (1.38 N.m) LXM62 1.75 mA, 115 V, single phase 11.86 lbf.in (1.34 N.m) LXM62 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM62 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM62 1.7 mA, 480 V, three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.79 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"930 W","Mounting Support":"International standard flange","Sizing reference":"MH30701P","Back emf constant":"50.72 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"37.2 lbf.in (4.2 N.m), 115...480 V, three phase","Stator inductance":"23.4 mH","Stator resistance":"8.28 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.97 A","Nominal output power":"0.18 W, 115 V 0.42 W, 230 V 0.75 W, 400 V 0.93 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"12.4 lbf.in (1.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.78 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"2.8 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7997f9d99914fa22343349c006b43789.pdf","sourceUrl":"https://www.se.com/us/en/product/MH30701P06F2200/servo-motor-mh3-070-14nmno-keysingle16-linesno-brakeip65-ip676krpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30701P06F2200/alternatives.json"},"ai":{"faq":[{"question":"What drive works with the MH30701P06F2200's Hiperface encoder?","answer":"The single-turn SinCos Hiperface encoder pairs natively with Schneider LXM52 and LXM62 servo drives. Third-party drives that support the Hiperface protocol can also read it, but the drive must handle the analog sine-cosine signals plus the serial data channel."},{"question":"What is the holding torque of the brake on this servo motor?","answer":"The holding brake delivers 26.6 lbf·in (3 N·m) of holding torque with a pull-in power of 7 W. This is enough to hold a vertical load of roughly 30 kg at a 100 mm radius arm, assuming no external shock loads."},{"question":"What compliance documentation does Schneider provide for the MH30701P06F2200?","answer":"Standard Schneider servo motors carry CE and UKCA marking for the European market, and UL/CSA recognition for North America. RoHS and REACH declarations are available through Schneider's documentation portal. The IP65 rating is tested to IEC 60529."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30701P06F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30701P06F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}