{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30701P07F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30701P07F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30701P07F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30701P07F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30701P07F2200 servo motor with brake, 930 W continuous power, 5500 rpm nominal speed, 1.38 N.m nominal torque, IP65, Multiturn SinCos Hiperface encoder, smooth shaft, 70 mm flange.","salesMarkdown":"The MH30701P07F2200 is a 930 W continuous-power servo motor from Schneider Electric's MH3 series, spinning at 5500 rpm nominal. That speed puts it in the high-speed class — good for direct-drive spindles, packaging cutoffs, or any axis where you want to skip a gearbox and run the load at motor speed. Nominal torque is 1.38 N.m when paired with an LXM52 drive at 115 V three-phase input, and it derates slightly to 1.27 N.m at 480 V three-phase. The peak stall torque hits 4.2 N.m across the 115–480 V three-phase range — that's the short-term muscle for acceleration through a cycle. The holding brake delivers 3 N.m static torque, enough to hold a vertical load or keep a position on power loss without the drive holding current. Brake pull-in power is 7 W — small enough that the holding brake won't cook the motor in a stalled condition. ## Encoder feedback and sealing — field-install realities The Multiturn SinCos Hiperface encoder gives absolute position over multiple revolutions, so the controller knows the shaft angle at power-up without a homing move. That saves a few seconds per cycle on machines that cycle power between batches. IP65 rating means the motor body and the connector interface are sealed against hose-directed water — fine for washdown zones in food plants or outdoor conveyor sections. The shaft seal is the weak point at sustained high rpm; the radial force limits drop from 660 N at 1000 rpm to 360 N at 6000 rpm, so a belt-driven load at top speed needs a bearing check. Natural convection cooling — no fan, so the motor relies on its own surface area to shed heat. The continuous stall torque is 1.4 N.m across the voltage range, which is essentially the thermal limit at zero speed. If the duty cycle keeps the motor near stall, expect the 135 °C copper hot limit to be the binding constraint. The motor mates with Schneider LXM52 and LXM62 drive families — the nominal torque figures in the spec table are measured with those drives at the stated input voltages. If you're replacing an existing motor in a Lexium system, verify the drive model and the feedback cable pinout before committing.","metaTitle":"Schneider Electric MH30701P07F2200 Servo Motor, 930 W","metaDescription":"Schneider Electric MH30701P07F2200 servo motor with brake, 930 W continuous power, 5500 rpm nominal speed, IP65, Multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH30701P07F2200","Length":"6.3 in (161 mm)","Inertia":"0.11 kg.cm² of brake 0.59 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 70mm, 1 stack, smooth Shaft, SinCos Multiturn 16, Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"5500 rpm","Rotor inertia":"0.7 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.21 lbf.in (1.38 N.m) LXM52 1.75 mA, 115 V, three phase 11.86 lbf.in (1.34 N.m) LXM52 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM52 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM52 1.7 mA, 480 V, three phase 12.21 lbf.in (1.38 N.m) LXM62 1.75 mA, 115 V, single phase 11.86 lbf.in (1.34 N.m) LXM62 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM62 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM62 1.7 mA, 480 V, three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.79 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"930 W","Mounting Support":"International standard flange","Sizing reference":"MH30701P","Back emf constant":"50.72 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"37.2 lbf.in (4.2 N.m), 115...480 V, three phase","Stator inductance":"23.4 mH","Stator resistance":"8.28 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.97 A","Nominal output power":"0.18 W, 115 V 0.42 W, 230 V 0.75 W, 400 V 0.93 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"5.97 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"12.4 lbf.in (1.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.78 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"2.8 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a6b507a1c48f75346ce314d92f5dfaf7.pdf","sourceUrl":"https://www.se.com/us/en/product/MH30701P07F2200/mh3-servomotor-70mm-1-stack-smooth-shaft-sincos-multiturn-16-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on MH30701P07F2200?","answer":"The holding brake delivers 3 N.m (26.6 lbf.in) static torque. Brake pull-in power is 7 W."},{"question":"What encoder type does MH30701P07F2200 use?","answer":"It uses a Multiturn SinCos Hiperface encoder, providing absolute position feedback over multiple revolutions — no homing cycle needed at power-up."},{"question":"What is the IP rating and cooling method?","answer":"IP65 standard — sealed against washdown. Cooling is natural convection (no fan)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30701P07F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30701P07F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}