{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30701P11A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30701P11A2200","canonicalUrl":"https://aoctrl.com/schneider/MH30701P11A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30701P11A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30701P11A2200 MH3 series servo motor, three-phase, 930 W continuous power, 1.38 N.m nominal torque, IP65, single-turn SinCos Hiperface encoder, without brake, 70 mm flange.","salesMarkdown":"## What this 930 W servo motor delivers on a motion axis The MH30701P11A2200 is a three-phase servo motor from Schneider Electric's MH3 series, rated for 930 W continuous power — enough for indexing, pick-and-place, or light machining axes where the load cycle stays under that ceiling. Nominal torque lands at 1.38 N.m when paired with an LXM52 drive on 115 V three-phase supply, and 1.27 N.m at 480 V — the torque curve stays tight across voltage variants, so the motor delivers consistent force regardless of the line voltage at the cabinet. Peak stall torque hits 4.2 N.m for short bursts — useful for accelerating a load through a quick move without oversizing the motor for the steady-state torque. ## Encoder feedback and position-loop fit The single-turn SinCos Hiperface encoder gives absolute position within one revolution — no battery-backed multiturn count, so the drive knows the shaft angle at power-up but loses multi-turn position after a power cycle. This encoder type suits applications where the axis homes on each power-up (conveyor diverters, rotary tables) rather than battery-backed multiturn setups for gantry systems. ## Mounting, cooling, and environmental sealing The 70 mm international standard flange (2.8 in) with four mounting holes and a 60 mm centring collar bolts directly to common gearbox or machine frames — no adapter plate needed for most NEMA or metric interfaces. IP65 rating means the motor body and shaft seal withstand washdown — suitable for food-and-bev lines or wet machining environments where coolant spray hits the motor housing. Natural convection cooling keeps the design simple — no fan or compressed air required, but the 930 W continuous rating assumes free airflow around the finned housing; derate if boxed into a tight enclosure. Rotatable right-angled connectors let the power and feedback cables exit in any of four orientations — a real time-saver when the motor sits against a panel wall or gearbox flange. ## No holding brake — plan the safety circuit This variant ships without a holding brake — the motor shaft spins freely when power is removed, so vertical-axis loads need an external brake or a drive with a safe torque-off function that holds the load via the motor's magnetic detent. The shaft end is parallel key with a 0.4 in (11 mm) diameter and 0.9 in (23 mm) length — standard metric keyway for coupling to pulleys, timing-belt sprockets, or direct-drive shafts. Maximum mechanical speed is 8000 rpm — the nominal speed depends on the drive voltage (1250 rpm at 115 V, up to 7000 rpm at 480 V), so the motor itself is not the speed limiter; the drive's bus voltage sets the ceiling. No stock-holding claim — quoted per RFQ. The sizing reference MH30701P groups this motor with compatible drives and cables — use that reference when ordering the mating power and feedback connectors to ensure the pinout matches.","metaTitle":"Schneider Electric MH30701P11A2200 Servo Motor, 930 W, IP65","metaDescription":"Schneider Electric MH30701P11A2200 servo motor, 930 W continuous power, 1.38 N.m nominal torque, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"4.8 in (122 mm)","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"1250 rpm LXM52 1.75 mA, 115 V, single phase 3000 rpm LXM52 1.75 mA, 230 V, single phase 5500 rpm LXM52 1.72 mA, 400 V, three phase 7000 rpm LXM52 1.7 mA, 480 V, three phase 1250 rpm LXM62 1.75 mA, 115 V, single phase 3000 rpm LXM62 1.75 mA, 230 V, single phase 5500 rpm LXM62 1.72 mA, 400 V, three phase 7000 rpm LXM62 1.7 mA, 480 V, three phase","Rotor inertia":"0.59 kg.cm²","Nominal torque":"12.21 lbf.in (1.38 N.m) LXM52 1.75 mA, 115 V, three phase 11.86 lbf.in (1.34 N.m) LXM52 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM52 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM52 1.7 mA, 480 V, three phase 12.21 lbf.in (1.38 N.m) LXM62 1.75 mA, 115 V, single phase 11.86 lbf.in (1.34 N.m) LXM62 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM62 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM62 1.7 mA, 480 V, three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.79 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"930 W","Mounting Support":"International standard flange","Sizing reference":"MH30701P","Back emf constant":"50.72 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"37.2 lbf.in (4.2 N.m), 115...480 V, three phase","Stator inductance":"23.4 mH","Stator resistance":"8.28 Ohm","Maximum current Irms":"5.97 A","Nominal output power":"0.18 W, 115 V 0.42 W, 230 V 0.75 W, 400 V 0.93 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"12.4 lbf.in (1.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.78 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"2.8 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/778af0ebb402a478406210e437b5171e.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH30701P11A2200/mh3-servomotor-70mm-1-stack-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30701P11A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to MH30701P11A2200 in the MH3 family?","answer":"The MH30701P sizing reference groups motors with the same flange size and shaft dimensions; a different encoder type or brake option would be a different order code within that group."},{"question":"What compliance documentation does Schneider Electric provide for this servo motor?","answer":"The evidence does not list specific compliance certificates (RoHS, REACH, UL, IEC) for this order code. Standard Schneider MH3 series motors typically carry CE and UL markings per the product family documentation — confirm the exact certificates with the order at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30701P11A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30701P11A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}