{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30701P16F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30701P16F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30701P16F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30701P16F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH30701P16F2200, 930 W continuous power, 1.38 Nm nominal torque, 1250 rpm nominal speed, three-phase, IP65, single-turn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## 930 W continuous power, 1.38 Nm — the real-world duty point The MH30701P16F2200 is a Schneider Electric MH3 series servo motor with a holding brake, rated for 930 W continuous power and 1.38 Nm nominal torque at 1250 rpm. That 1.38 Nm is the torque the motor can deliver continuously without overheating — the number that governs your duty cycle on a conveyor or spindle, not the peak figure. Three-phase winding, IP65-rated body, and a single-turn SinCos Hiperface encoder mean this motor is built for position-feedback applications in washdown or dusty environments — think food processing, packaging, or machine tool axes where you need both torque and positional accuracy. ## Torque and speed envelope — what the ratings actually allow Peak stall torque hits 4.2 Nm across the 115–480 V three-phase range — that's the torque available for acceleration or breaking a stuck load, but it's limited by the drive's current capability and thermal time constant, not a continuous figure. Nominal speed is 1250 rpm, but the motor can spin up to 7000 rpm depending on the drive and supply voltage (LXM52/LXM62 drives at 480 V three-phase). The torque constant is 0.79 Nm/A at 120 °C copper temperature — use that to size the drive's continuous current rating against your load's torque demand. ## Mounting and integration — 70 mm flange, IP65, right-angle connectors International standard flange, 70 mm square, with a 60 mm centring collar and 5.5 mm mounting holes. The 2.5 mm centring collar depth locates the motor precisely on the machine frame — no shimming needed if the pilot bore is within tolerance. Rotatable right-angle electrical connectors let you route the power and feedback cables close to the motor body — useful in tight enclosures or when the motor mounts vertically and the cable needs to exit downward. Sourced through independent distribution channels against an RFQ.","metaTitle":"Schneider Electric MH30701P16F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30701P16F2200 servo motor with brake, 930 W continuous power, 1.38 Nm nominal torque, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.3 in (161 mm)","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1250 rpm LXM52 1.75 mA, 115 V, single phase 3000 rpm LXM52 1.75 mA, 230 V, single phase 5500 rpm LXM52 1.72 mA, 400 V, three phase 7000 rpm LXM52 1.7 mA, 480 V, three phase 1250 rpm LXM62 1.75 mA, 115 V, single phase 3000 rpm LXM62 1.75 mA, 230 V, single phase 5500 rpm LXM62 1.72 mA, 400 V, three phase 7000 rpm LXM62 1.7 mA, 480 V, three phase","Rotor inertia":"0.7 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.21 lbf.in (1.38 N.m) LXM52 1.75 mA, 115 V, three phase 11.86 lbf.in (1.34 N.m) LXM52 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM52 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM52 1.7 mA, 480 V, three phase 12.21 lbf.in (1.38 N.m) LXM62 1.75 mA, 115 V, single phase 11.86 lbf.in (1.34 N.m) LXM62 1.75 mA, 230 V, single phase 11.5 lbf.in (1.3 N.m) LXM62 1.72 mA, 400 V, three phase 11.24 lbf.in (1.27 N.m) LXM62 1.7 mA, 480 V, three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.79 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"930 W","Mounting Support":"International standard flange","Sizing reference":"MH30701P","Back emf constant":"50.72 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"37.2 lbf.in (4.2 N.m), 115...480 V, three phase","Stator inductance":"23.4 mH","Stator resistance":"8.28 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.97 A","Nominal output power":"0.18 W, 115 V 0.42 W, 230 V 0.75 W, 400 V 0.93 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"12.4 lbf.in (1.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.78 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"2.8 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5e181cf76e1f58d0d3e4433a07f5156b.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH30701P16F2200/mh3-servomotor-70mm-1-stack-keyed-shaft-sincos-singleturn-16-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30701P16F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque and speed of MH30701P16F2200?","answer":"Nominal torque is 1.38 Nm at 1250 rpm nominal speed. Peak stall torque reaches 4.2 Nm for acceleration or overload events."},{"question":"What encoder type does MH30701P16F2200 use?","answer":"Single-turn SinCos Hiperface encoder — a high-resolution absolute feedback interface common on Schneider Lexium drives. It provides position and speed feedback without a separate home cycle."},{"question":"What is the IP rating and mounting flange size?","answer":"IP65 standard for dust and water-jet resistance. The flange is 70 mm (international standard) with a 60 mm centring collar and 5.5 mm mounting holes."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30701P16F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30701P16F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}