{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30701P17F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30701P17F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30701P17F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30701P17F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30701P17F2200 MH3 series servo motor with brake, three-phase, 930 W continuous power, 5500 rpm nominal speed, 3 N.m holding brake, IP65, multiturn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## What this servo motor delivers for a motion axis The MH30701P17F2200 is a three-phase servo motor from the MH3 series, delivering 930 W continuous power at 5500 rpm nominal speed — suited for high-speed pick-and-place, small conveyor drives, or packaging machine axes where cycle time matters more than brute torque. Nominal torque depends on the drive voltage: 1.38 N.m with a Lexium 52/62 at 115 V three-phase, dropping to 1.27 N.m at 480 V three-phase. The peak stall torque of 4.2 N.m covers acceleration and breakaway friction without oversizing the motor frame. The integrated holding brake holds 3 N.m — enough to keep a vertical axis stationary when the drive is disabled, eliminating the need for an external mechanical brake or Z-axis counterbalance. ## Encoder feedback and absolute positioning A multiturn SinCos Hiperface encoder provides absolute position feedback — no homing sequence on power-up, which shaves seconds off each machine start and avoids collision risks during reference runs. The encoder resolution supports the 5500 rpm top speed without aliasing; the SinCos analog track gives sub-micron position interpolation when paired with a compatible Lexium drive. ## Mounting, cooling, and environmental sealing The motor mounts on an international standard flange with a 70 mm square face and 5.5 mm mounting holes — fits common servo gearbox and machine-frame patterns without adapter plates. IP65 standard sealing means the motor body and connector interface withstand washdown and airborne dust — suitable for food processing, beverage filling, or packaging lines where hose-down cleaning is routine. Cooling is by natural convection — no fan or external blower needed, which simplifies wiring and eliminates a failure point. The rotatable right-angled connectors let the cable exit in any of four orientations, easing routing in tight cable trays or drag chains. ## Bearing load and radial force limits Maximum permissible radial force on the shaft end derates with speed: 660 N at 1000 rpm, 520 N at 2000 rpm, down to 360 N at 6000 rpm. A belt-driven or direct-coupled load exceeding this curve at the operating speed will shorten bearing life — the curve is the limit for L10 life under continuous duty. The shaft is 11 mm diameter with a parallel key and 23 mm usable length — standard for coupling to small gearboxes or timing-belt pulleys in this power class. ## Sourcing and lifecycle status No pin-compatible alternative exists within the MH3 family — the MH30701P17F2200 is the specific variant with the 3 N.m brake and Hiperface encoder.","metaTitle":"Schneider Electric MH30701P17F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30701P17F2200 servo motor with brake, 930 W continuous power, 5500 rpm nominal speed, 3 N.m holding brake, IP65, multiturn Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Length":"6.3 in (161 mm)","IP Rating":"IP65","Encoder Type":"Multiturn SinCos Hiperface","Product Status":"Active","Shaft Diameter":"0.4 in (11 mm)","Shaft End Type":"Parallel key","Max Radial Force Fr N":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Centring Collar Diameter":"2.4 in (60 mm)","Main Product Or Component Type":"Servo motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b5955ceeb23df05bdcb9c7c651804af0.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH30701P17F2200/mh3-servomotor-70mm-1-stack-keyed-shaft-sincos-multiturn-16-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30701P17F2200/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30701P17F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30701P17F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}