{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30702P01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30702P01F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30702P01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30702P01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH30702P01F2200, 1380 W continuous power, three-phase, IP65, single-turn SinCos Hiperface encoder, 70 mm flange, smooth shaft.","salesMarkdown":"## Motor specs that decide the drive match The MH30702P01F2200: This is a three-phase servo motor from the MH3 family, sized for 1380 W continuous power and matched to Schneider's LXM52 or LXM62 drive series. The nominal speed is drive-voltage dependent — 1250 rpm at 115 V single-phase input, up to 7000 rpm at 480 V three-phase — so the drive selection sets the speed-torque envelope you actually get on the shaft. The holding brake is integrated, delivering 26.6 lbf.in (3 N.m) holding torque with a 7 W pull-in power — low enough that the drive's brake control circuit handles it without an external relay. For vertical-axis loads or Z-axis stages, that brake is what keeps the load from drifting when the drive is disabled. Encoder feedback is a single-turn SinCos Hiperface type — absolute position within one revolution, no homing cycle needed on power-up for rotary applications. The 10-pole motor design gives a smooth torque ripple profile at low speeds, which matters for contouring or indexing moves. ## Torque, inertia, and thermal limits for the motion profile Continuous stall torque is 21.95 lbf.in (2.48 N.m) across the 115–480 V three-phase range, with a continuous stall current of 2.94 A. Peak stall torque hits 65.5 lbf.in (7.4 N.m) — about 3× the continuous rating — so the motor can handle acceleration and deceleration transients without tripping the drive's current limit, as long as the duty cycle stays within the thermal time constant. Maximum mechanical speed is 8000 rpm, but the radial force the bearings can sustain drops with speed — 710 N at 1000 rpm down to 390 N at 6000 rpm. If your application has a heavy belt or gear load on the shaft, derate the speed or check the radial force curve against the load. ## Mounting, sealing, and wiring for the cabinet Mounts on an international standard flange with a 70 mm flange size and 60 mm centring collar diameter. The centring collar depth is 2.5 mm — enough to locate the motor squarely on the machine frame without shimming. Four mounting holes at 5.5 mm diameter on the flange face. IP65 standard protection means the motor body is sealed against dust ingress and low-pressure water jets — suitable for washdown areas in food processing or packaging lines. Cooling is natural convection, so no external fan or coolant lines needed; the continuous power rating assumes free air circulation around the motor housing. Electrical connection uses rotatable right-angled connectors — you can orient the cable exit to clear cabinet walls or adjacent motors. The shaft is smooth (no keyway), 11 mm diameter, 23 mm shaft length — typical for direct coupling to a load via a flexible jaw coupling or bellows coupling.","metaTitle":"Schneider Electric MH30702P01F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30702P01F2200 servo motor with brake, 1380 W continuous power, 3-phase, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.6 in (193 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1250 rpm LXM52 2.82 mA, 115 V, single phase 3000 rpm LXM52 2.7 mA, 230 V, single phase 5500 rpm LXM52 2.49 mA, 400 V, three phase 7000 rpm LXM52 2.36 mA, 480 V, three phase 1250 rpm LXM62 2.82 mA, 115 V, single phase 3000 rpm LXM62 2.7 mA, 230 V, single phase 5500 rpm LXM62 2.49 mA, 400 V, three phase 7000 rpm LXM62 2.36 mA, 480 V, three phase","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"20.98 lbf.in (2.37 N.m) LXM52 2.82 mA, 115 V, three phase 19.74 lbf.in (2.23 N.m) LXM52 2.7 mA, 230 V, single phase 17.79 lbf.in (2.01 N.m) LXM52 2.49 mA, 400 V, three phase 16.73 lbf.in (1.89 N.m) LXM52 2.36 mA, 480 V, three phase 20.98 lbf.in (2.37 N.m) LXM62 2.82 mA, 115 V, single phase 19.74 lbf.in (2.23 N.m) LXM62 2.7 mA, 230 V, single phase 17.79 lbf.in (2.01 N.m) LXM62 2.49 mA, 400 V, three phase 16.73 lbf.in (1.89 N.m) LXM62 2.36 mA, 480 V, three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1380 W","Mounting Support":"International standard flange","Sizing reference":"MH30702P","Back emf constant":"54.08 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"65.5 lbf.in (7.4 N.m), 115...480 V, three phase","Stator inductance":"12.19 mH","Stator resistance":"3.84 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"9.68 A","Nominal output power":"0.31 W, 115 V 0.7 W, 230 V 1.16 W, 400 V 1.38 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"21.95 lbf.in (2.48 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.94 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1d87bc8f959bbc58749bf7cdb2491bd2.pdf","sourceUrl":"https://www.se.com/us/en/product/MH30702P01F2200/servo-motor-mh3-070-22nmno-keysinglebrakeip65-ip676krpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30702P01F2200/alternatives.json"},"ai":{"faq":[{"question":"What drives is MH30702P01F2200 compatible with?","answer":"The motor is designed for Schneider's LXM52 and LXM62 drive series. The nominal speed varies with the drive's input voltage — from 1250 rpm at 115 V single-phase up to 7000 rpm at 480 V three-phase."},{"question":"What is the holding torque of the brake on MH30702P01F2200?","answer":"The integrated holding brake delivers 26.6 lbf.in (3 N.m) holding torque with a 7 W pull-in power."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30702P01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30702P01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}