{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30702P06F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30702P06F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30702P06F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30702P06F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30702P06F2200 servo motor with brake, three-phase, 5500 rpm nominal speed, 1380 W continuous power, 2.37 N.m nominal torque, IP65, single-turn SinCos Hiperface encoder, smooth shaft, 70 mm flange.","salesMarkdown":"The MH30702P06F2200: This motor spins at 5500 rpm nominal, which puts it in the high-speed servo class — direct-drive spindles or gearbox-coupled applications where you need speed over brute torque. The 1380 W continuous power figure is the thermal ceiling under natural convection cooling; exceed it for sustained periods and the winding temperature hits the 135 °C copper hot limit. Nominal torque drops with supply voltage: 2.37 N.m at 115 V three-phase, 2.23 N.m at 230 V single-phase, 2.01 N.m at 400 V three-phase, and 1.89 N.m at 480 V three-phase. Match your drive voltage to the torque you need — the motor doesn't care, but the available torque does. Peak stall torque hits 7.4 N.m across the 115–480 V range, good for acceleration transients. The holding brake locks at 3 N.m — enough to hold a vertical load without power, but check your static load against that number before trusting it for safety stops. ## Encoder feedback and integration notes Single-turn SinCos Hiperface encoder gives absolute position within one revolution — no homing sequence on power-up if your drive supports the protocol. The rotatable right-angle connectors let you route the cable in tight panels without a right-angle adapter. Smooth shaft, 11 mm diameter, 23 mm engagement length. The 70 mm flange with 60 mm centring collar and 5.5 mm mounting holes is the standard IEC metric pattern — bolts into most servo mounts without adapter plates. IP65 rating means the housing and shaft seal handle washdown and dust — fine for food processing or wet machining, but the connector must be mated with the matching IP65-rated cordset to keep the seal intact. The motor pairs with Lexium 52 and 62 drives — the nominal torque table lists performance with both families.","metaTitle":"Schneider Electric MH30702P06F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30702P06F2200 servo motor with brake, 5500 rpm, 1380 W continuous power, IP65, single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH30702P06F2200","Length":"7.6 in (193 mm)","Inertia":"0.11 kg.cm² of brake 1.13 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 70mm, 2 stacks, smooth Shaft, SinCos Singleturn 16, Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"5500 rpm","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"20.98 lbf.in (2.37 N.m) LXM52 2.82 mA, 115 V, three phase 19.74 lbf.in (2.23 N.m) LXM52 2.7 mA, 230 V, single phase 17.79 lbf.in (2.01 N.m) LXM52 2.49 mA, 400 V, three phase 16.73 lbf.in (1.89 N.m) LXM52 2.36 mA, 480 V, three phase 20.98 lbf.in (2.37 N.m) LXM62 2.82 mA, 115 V, single phase 19.74 lbf.in (2.23 N.m) LXM62 2.7 mA, 230 V, single phase 17.79 lbf.in (2.01 N.m) LXM62 2.49 mA, 400 V, three phase 16.73 lbf.in (1.89 N.m) LXM62 2.36 mA, 480 V, three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1380 W","Mounting Support":"International standard flange","Sizing reference":"MH30702P","Back emf constant":"54.08 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"65.5 lbf.in (7.4 N.m), 115...480 V, three phase","Stator inductance":"12.19 mH","Stator resistance":"3.84 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"9.65 A","Nominal output power":"0.31 W, 115 V 0.7 W, 230 V 1.16 W, 400 V 1.38 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"9.65 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"21.95 lbf.in (2.48 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.94 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1b425590276bc2fec4434cd3a9d031c3.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH30702P06F2200/mh3-servomotor-70mm-2-stacks-smooth-shaft-sincos-singleturn-16-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the MH30702P06F2200's nominal speed and torque?","answer":"Nominal speed is 5500 rpm. Nominal torque depends on the drive voltage: 2.37 N.m at 115 V three-phase, 2.23 N.m at 230 V single-phase, 2.01 N.m at 400 V three-phase, and 1.89 N.m at 480 V three-phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30702P06F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30702P06F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}