{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30702P07F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30702P07F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30702P07F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30702P07F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30702P07F2200 servo motor with holding brake, 1380 W, 5500 rpm, three-phase, IP65, Multiturn SinCos Hiperface encoder, smooth shaft, 7.6 in length.","salesMarkdown":"## Performance envelope — torque, speed, and power The MH30702P07F2200: Rated for 1380 W continuous output power at a nominal speed of 5500 rpm, this motor delivers a nominal torque of 2.37 N.m (20.98 lbf.in) when paired with an LXM52 drive at 115 V three-phase supply. The torque constant of 0.84 N.m/A and back EMF constant of 54.08 V/krpm define the drive tuning parameters — the drive's current loop must be set to match these values for stable torque control across the speed range. Peak stall torque reaches 7.4 N.m (65.5 lbf.in) across the 115...480 V three-phase range, giving a 3:1 overload margin over the continuous stall torque of 2.48 N.m. This headroom handles short-duration acceleration or load transients without tripping the drive. The maximum continuous current Irms is 9.65 A — the drive's rated output current must equal or exceed this figure to deliver full torque at rated speed. The 3-second peak current is also 9.65 A, so the overload capability is limited by the motor thermal time constant, not the current ceiling. ## Encoder and feedback — absolute position retention Equipped with a Multiturn SinCos Hiperface encoder, this motor provides absolute position feedback over multiple shaft revolutions. The SinCos analog tracks support high-resolution velocity and position loops, while the Hiperface digital interface carries the multiturn count — the drive retains the absolute position after a power cycle without needing a homing routine. ## Holding brake — vertical load security The integrated holding brake delivers 3 N.m (26.6 lbf.in) of holding torque, sufficient to secure a vertical-axis load when the drive is disabled. Brake pull-in power is 7 W — the drive's brake control output must supply this at the rated voltage, and the brake release time should be accounted for in the motion sequence to avoid dragging the load before the brake fully opens. ## Mounting and environmental sealing The motor flange size is 70 mm (2.8 in) with a centring collar diameter of 60 mm and a centring collar depth of 2.5 mm — this matches the standard IEC mounting pattern for servo motors in this power class. Four mounting holes of 5.5 mm diameter accept M5 bolts; the pilot diameter centres the motor on the machine frame. IP65 protection means the motor housing is dust-tight and protected against water jets from any direction. The rotatable right-angled connectors allow the cable exit to be oriented in 90° increments, simplifying cable routing in tight enclosures. Natural convection cooling requires unobstructed airflow around the frame — no fan is fitted, so derating applies if the motor is enclosed or mounted in a confined space. The maximum radial force at the shaft is 710 N at 1000 rpm, derating to 390 N at 6000 rpm. For belt-driven or direct-coupled loads, the applied radial load must stay below the curve at the operating speed to avoid bearing fatigue.","metaTitle":"Schneider Electric MH30702P07F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30702P07F2200 servo motor with brake, 1380 W continuous power, 5500 rpm nominal speed, IP65, Multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH30702P07F2200","Length":"7.6 in (193 mm)","Inertia":"0.11 kg.cm² of brake 1.13 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"servo motor MH3 070 2,2Nm,no key,multi 16 lines,brake,IP65/IP67,6kRPM","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"5500 rpm","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"20.98 lbf.in (2.37 N.m) LXM52 2.82 mA, 115 V, three phase 19.74 lbf.in (2.23 N.m) LXM52 2.7 mA, 230 V, single phase 17.79 lbf.in (2.01 N.m) LXM52 2.49 mA, 400 V, three phase 16.73 lbf.in (1.89 N.m) LXM52 2.36 mA, 480 V, three phase 20.98 lbf.in (2.37 N.m) LXM62 2.82 mA, 115 V, single phase 19.74 lbf.in (2.23 N.m) LXM62 2.7 mA, 230 V, single phase 17.79 lbf.in (2.01 N.m) LXM62 2.49 mA, 400 V, three phase 16.73 lbf.in (1.89 N.m) LXM62 2.36 mA, 480 V, three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1380 W","Mounting Support":"International standard flange","Sizing reference":"MH30702P","Back emf constant":"54.08 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"65.5 lbf.in (7.4 N.m), 115...480 V, three phase","Stator inductance":"12.19 mH","Stator resistance":"3.84 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"9.65 A","Nominal output power":"0.31 W, 115 V 0.7 W, 230 V 1.16 W, 400 V 1.38 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"9.65 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"21.95 lbf.in (2.48 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.94 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7cd7c877199db43cde1b39e920a478a3.pdf","sourceUrl":"https://www.se.com/ca/en/product/MH30702P07F2200/servo-motor-mh3-070-22nmno-keymulti-16-linesbrakeip65-ip676krpm/"},"ai":{"faq":[{"question":"What drives are compatible with the MH30702P07F2200?","answer":"The nominal torque values are specified for both LXM52 and LXM62 drive families across 115 V to 480 V supply voltages, single-phase or three-phase depending on the drive variant. The torque constant of 0.84 N.m/A and back EMF constant of 54.08 V/krpm are the key tuning parameters for the drive's current loop."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30702P07F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30702P07F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}