{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30702P17F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30702P17F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30702P17F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30702P17F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30702P17F2200 MH3 series servo motor with brake, 1380 W continuous power, 5500 rpm nominal speed, 2.37 N.m nominal torque, IP65, multiturn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"The MH30702P17F2200: The holding brake delivers 3 N.m static torque — enough to hold a vertical-axis load at standstill without the drive having to maintain a holding current. Brake pull-in power is only 7 W, so the thermal load on the motor end-bell stays modest even with frequent engage/release cycles. Torque output depends on which LXM5x or LXM6x drive supplies it: at 115 V three-phase you get the full 2.37 N.m; at 480 V three-phase it derates to 1.89 N.m. The peak stall torque is 7.4 N.m across the voltage range — useful for acceleration transients or breaking away a stuck load. ## Encoder, feedback, and position-hold for safety circuits The multiturn SinCos Hiperface encoder gives absolute position over multiple shaft revolutions — no homing sequence needed after a power cycle. This matters for applications where the axis must resume from the last known position after an E-stop or unplanned shutdown. IP65 rating on the motor body and the rotatable right-angled connectors means the assembly withstands washdown and airborne particulates. The connector rotates to orient the cable exit — useful when the motor mounts in a tight enclosure corner and the cable needs to route without a tight bend radius. ## Mounting interface and mechanical limits The 70 mm IEC flange (2.8 in) with a 0.2 in (5.5 mm) mounting hole pattern and 0.10 in (2.5 mm) centring collar depth matches standard metric servo mounting dimensions. Shaft is 11 mm diameter with a parallel key, 23 mm engagement length — fits standard couplings and pulleys. Maximum radial force on the shaft drops with speed: 710 N at 1000 rpm, 390 N at 6000 rpm. If this motor drives a belt or a direct-mounted pulley, the belt tension must stay below the speed-dependent limit or the front bearing life shortens. ## Electrical parameters for drive matching Stator resistance is 3.84 Ohm and inductance is 12.19 mH — the electrical time constant (L/R) is about 3.2 ms, which sets the current-loop bandwidth ceiling. The torque constant is 0.84 N.m/A at 120 °C copper temperature, and the back EMF constant is 54.08 V/krpm — both needed to calculate the drive's voltage and current requirements at top speed. Maximum continuous current is 9.65 A RMS; the 3-second peak current is also 9.65 A, so the drive's peak-current rating must match or exceed this for acceleration transients. Natural convection cooling means no external fan or air supply — the motor sheds heat through the flange and housing surface.","metaTitle":"Schneider Electric MH30702P17F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30702P17F2200 servo motor with brake, 1380 W continuous power, 5500 rpm nominal speed, 2.37 N.m torque, IP65, multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Length":"7.6 in (193 mm)","IP Rating":"IP65","Encoder Type":"Multiturn SinCos Hiperface","Product Status":"Active","Shaft Diameter":"0.4 in (11 mm)","Shaft End Type":"Parallel key","Max Radial Force Fr N":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Centring Collar Diameter":"2.4 in (60 mm)","Main Product Or Component Type":"Servo motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/362137fdae6448a0195ed2509d849a7f.pdf","sourceUrl":"https://www.se.com/ca/en/product/MH30702P17F2200/servo-motor-mh3-070-22nmkeymulti-16-linesbrakeip65-ip676krpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30702P17F2200/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30702P17F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30702P17F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}