{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30703P01A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30703P01A2200","canonicalUrl":"https://aoctrl.com/schneider/MH30703P01A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30703P01A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30703P01A2200 servo motor, three-phase, 1540 W continuous power, 5000 rpm nominal speed, 3.18 N.m nominal torque at 115 V, single-turn SinCos Hiperface encoder, IP65, smooth shaft, flange size 70 mm.","salesMarkdown":"## What this 1540 W servo motor fits The MH30703P01A2200 is a three-phase servo motor from Schneider Electric's MH3 series, delivering 1540 W continuous power at 5000 rpm nominal speed. It's sized for applications that need sustained torque at high speeds — think spindle drives, packaging machine axes, or any motion profile where the load cycle stays within the continuous stall torque of 3.4 N.m (30.09 lbf.in) across the 115...480 V range. The nominal torque varies with the drive voltage and phase configuration: 3.18 N.m at 115 V three-phase, dropping to 2.26 N.m at 480 V three-phase when paired with an LXM52 or LXM62 drive. That means the same motor body can serve different line voltages — useful if you're standardising on one frame size across multiple machine variants. ## Encoder, shaft, and environmental fit A single-turn SinCos Hiperface encoder provides absolute position feedback within one revolution — no homing sequence needed at power-up if the application only needs position within a single turn. The smooth shaft (14 mm diameter, 30 mm length) means the load coupling uses a clamp-type or shrink-fit connection rather than a keyway; budget for the correct shaft collar or coupling bore. The rotatable right-angled connectors let you route the power and feedback cables in tight enclosures without bending the cable below its minimum radius. For a retrofit into an existing machine, check that the flange size (70 mm, international standard) and centring collar (60 mm diameter, 2.5 mm depth) match your mounting bracket. The 5.5 mm mounting holes are standard M5 clearance; no adapter plate needed if the original motor used the same bolt pattern.","metaTitle":"Schneider Electric MH30703P01A2200 Servo Motor, 1540 W","metaDescription":"Schneider Electric MH30703P01A2200 servo motor, 1540 W continuous, 5000 rpm nominal, IP65, single-turn SinCos Hiperface encoder. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH30703P01A2200","Length":"7.3 in (186 mm)","Inertia":"0.0 kg.cm² of brake 1.67 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 70mm, 3 stacks, smooth Shaft, SinCos Singleturn 128, no Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"5000 rpm","Rotor inertia":"1.67 kg.cm²","Nominal torque":"28.15 lbf.in (3.18 N.m) LXM52 3.56 mA, 115 V, three phase 26.20 lbf.in (2.96 N.m) LXM52 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM52 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM52 2.74 mA, 480 V, three phase 28.15 lbf.in (3.18 N.m) LXM62 3.56 mA, 115 V, single phase 26.20 lbf.in (2.96 N.m) LXM62 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM62 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM62 2.74 mA, 480 V, three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.87 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1540 W","Mounting Support":"International standard flange","Sizing reference":"MH30703P","Back emf constant":"55 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"90.3 lbf.in (10.2 N.m), 115...480 V, three phase","Stator inductance":"8.64 mH","Stator resistance":"2.65 Ohm","Maximum current Irms":"12.57 A","Nominal output power":"0.42 W, 115 V 0.75 W, 230 V 1.32 W, 400 V 1.54 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"12.57 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.91 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/01b105458d9557c54ff32903a7098b15.pdf","sourceUrl":"https://www.se.com/us/en/product/MH30703P01A2200/mh3-servomotor-70mm-3-stacks-smooth-shaft-sincos-singleturn-128-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"Where can I buy MH30703P01A2200 and get a price?","answer":"The MH30703P01A2200 is available to order through independent distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30703P01A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30703P01A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}