{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30703P07F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30703P07F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30703P07F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30703P07F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH30703P07F2200, three-phase, 1.54 kW nominal output power at 480 V, 5000 rpm, Multiturn SinCos Hiperface encoder, IP65, smooth shaft, 70 mm flange.","salesMarkdown":"## Motor specs that decide the drive pair The MH30703P07F2200 is a three-phase servo motor from the MH3 family, sized for Lexium 52 and 62 drive platforms. Nominal torque and speed are supply-voltage dependent: at 480 V three-phase it delivers 2.26 N·m at 6500 rpm; at 400 V three-phase it delivers 2.53 N·m at 5000 rpm. The nominal output power reaches 1.54 kW at 480 V, with continuous stall torque of 3.4 N·m across the 115–480 V range. The holding brake (7 W pull-in power) locks the rotor at standstill — essential for vertical-axis loads where the Z-axis must not drift when power is removed. Smooth shaft, no second shaft end, so no room for an external encoder or handwheel on the rear. ## Encoder and feedback — absolute position without a home cycle Multiturn SinCos Hiperface encoder gives absolute position over multiple shaft revolutions. No need to re-reference on power-up — the drive knows the axis position as soon as the bus wakes. That saves a home-proximity sensor and a homing routine on every boot. The electrical connection uses rotatable right-angled connectors, which helps route the motor cable tight to the frame in a crowded cabinet or on a moving carriage. IP65 standard means the housing and connectors tolerate washdown spray and airborne dust — fine for food, beverage, or packaging lines. ## Thermal and mechanical limits for the commissioning log Natural convection cooling — no fan, so the continuous torque rating assumes free airflow around the frame. In a zero-airflow enclosure or with a rubber boot over the shaft, the thermal limit drops. Stator resistance is 2.65 Ω, inductance 8.64 mH — these set the current-loop bandwidth and the maximum switching frequency the drive can push into the windings.","metaTitle":"Schneider Electric MH30703P07F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30703P07F2200 servo motor with brake, 1.54 kW nominal at 480 V, 5000 rpm, Multiturn SinCos Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.9 in (225 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"1250 rpm LXM52 3.56 mA, 115 V, single phase 2500 rpm LXM52 3.47 mA, 230 V, single phase 5000 rpm LXM52 3.02 mA, 400 V, three phase 6500 rpm LXM52 2.74 mA, 480 V, three phase 1250 rpm LXM62 3.56 mA, 115 V, single phase 2500 rpm LXM62 3.47 mA, 230 V, single phase 5000 rpm LXM62 3.02 mA, 400 V, three phase 6500 rpm LXM62 2.74 mA, 480 V, three phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"28.15 lbf.in (3.18 N.m) LXM52 3.56 mA, 115 V, three phase 26.20 lbf.in (2.96 N.m) LXM52 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM52 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM52 2.74 mA, 480 V, three phase 28.15 lbf.in (3.18 N.m) LXM62 3.56 mA, 115 V, single phase 26.20 lbf.in (2.96 N.m) LXM62 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM62 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM62 2.74 mA, 480 V, three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.87 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1540 W","Mounting Support":"International standard flange","Sizing reference":"MH30703P","Back emf constant":"55 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"90.3 lbf.in (10.2 N.m), 115...480 V, three phase","Stator inductance":"8.64 mH","Stator resistance":"2.65 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"12.57 A","Nominal output power":"0.42 W, 115 V 0.75 W, 230 V 1.32 W, 400 V 1.54 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.91 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6ad2a83219ea4e34376158714541a160.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH30703P07F2200/mh3-servomotor-70mm-3-stacks-smooth-shaft-sincos-multiturn-16-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30703P07F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of the MH30703P07F2200 at 480 V?","answer":"At 480 V three-phase supply, the nominal torque is 2.26 N·m at 6500 rpm. At 400 V three-phase it delivers 2.53 N·m at 5000 rpm."},{"question":"Does the MH30703P07F2200 include a holding brake?","answer":"Yes — the motor is fitted with a holding brake (7 W pull-in power) that locks the rotor at standstill. This is critical for vertical-axis applications where the load must not drop when power is removed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30703P07F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30703P07F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}