{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30703P11A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30703P11A2200","canonicalUrl":"https://aoctrl.com/schneider/MH30703P11A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30703P11A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30703P11A2200 servo motor, MH3 series, three-phase, 1540 W continuous power, IP65, single-turn SinCos Hiperface encoder, 70 mm flange, without brake.","salesMarkdown":"## Motor ratings that drive sizing The MH30703P11A2200 is a three-phase servo motor from the Schneider Electric MH3 family, delivering 1540 W continuous power. Nominal torque and speed depend on the drive voltage: at 115 V three-phase it delivers 28.15 lbf·in (3.18 N·m) at 1250 rpm; at 480 V three-phase it delivers 20.003 lbf·in (2.26 N·m) at 6500 rpm. Continuous stall torque is 30.09 lbf·in (3.4 N·m) across the 115...480 V three-phase range, with a continuous stall current of 3.91 A. Peak stall torque reaches 90.3 lbf·in (10.2 N·m) — useful for short-duration acceleration or overcoming static friction. Maximum mechanical speed is 8000 rpm, but the motor's nominal speed at rated torque tops out at 6500 rpm with a 480 V drive. The 10-pole design means the drive's electrical frequency at 6500 rpm is 541.7 Hz — check that the drive's output frequency range covers this. ## Feedback and electrical interface The encoder is a single-turn SinCos Hiperface type — an analog sine/cosine interface with absolute position within one revolution. This mates directly with Schneider Lexium 52 and 62 drives, which expect the Hiperface protocol. The motor has no holding brake and no second shaft end. Electrical connection uses rotatable right-angled connectors — useful when cable exit direction needs to be adjusted in a tight cabinet. Stator resistance is 2.65 Ω and inductance is 8.64 mH; these values go into the drive's auto-tuning routine for current loop gains. Maximum continuous current (Irms) is 12.57 A — the drive must be rated to supply this continuously at the operating voltage. The motor is cooled by natural convection, so no forced air or liquid cooling is required, but the mounting surface must allow free airflow around the frame. ## Mounting and mechanical fit The motor flange is 70 mm (2.8 in) with an international standard flange pattern — 4 mounting holes on a bolt circle, each 5.5 mm diameter. The centring collar is 60 mm diameter by 2.5 mm deep, which pilots the motor into the mating bore on the gearbox or machine frame. The shaft is 14 mm diameter with a parallel key, 30 mm long, and a 5 mm keyway width. Overall motor length is 186 mm (7.3 in). Maximum radial force at the shaft is 730 N at 1000 rpm, derating to 400 N at 6000 rpm — stay within these limits to avoid bearing damage. ## Environmental protection IP65 standard protection means the motor housing is dust-tight and protected against low-pressure water jets from any direction. This suits washdown environments in food processing or general industrial areas where coolant mist is present, but not full-pressure hose-down (IP66/IP67 would be needed for that).","metaTitle":"Schneider Electric MH30703P11A2200 Servo Motor, 1540 W","metaDescription":"Schneider Electric MH30703P11A2200 servo motor, 1540 W continuous power, 3-phase, IP65, single-turn SinCos Hiperface encoder, 70 mm flange.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.3 in (186 mm)","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"1250 rpm LXM52 3.56 mA, 115 V, single phase 2500 rpm LXM52 3.47 mA, 230 V, single phase 5000 rpm LXM52 3.02 mA, 400 V, three phase 6500 rpm LXM52 2.74 mA, 480 V, three phase 1250 rpm LXM62 3.56 mA, 115 V, single phase 2500 rpm LXM62 3.47 mA, 230 V, single phase 5000 rpm LXM62 3.02 mA, 400 V, three phase 6500 rpm LXM62 2.74 mA, 480 V, three phase","Rotor inertia":"1.67 kg.cm²","Nominal torque":"28.15 lbf.in (3.18 N.m) LXM52 3.56 mA, 115 V, three phase 26.20 lbf.in (2.96 N.m) LXM52 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM52 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM52 2.74 mA, 480 V, three phase 28.15 lbf.in (3.18 N.m) LXM62 3.56 mA, 115 V, single phase 26.20 lbf.in (2.96 N.m) LXM62 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM62 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM62 2.74 mA, 480 V, three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.87 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1540 W","Mounting Support":"International standard flange","Sizing reference":"MH30703P","Back emf constant":"55 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"90.3 lbf.in (10.2 N.m), 115...480 V, three phase","Stator inductance":"8.64 mH","Stator resistance":"2.65 Ohm","Maximum current Irms":"12.57 A","Nominal output power":"0.42 W, 115 V 0.75 W, 230 V 1.32 W, 400 V 1.54 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.91 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e547ef51fecbe9995c51c008cd3d1d6f.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH30703P11A2200/mh3-servomotor-70mm-3-stacks-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30703P11A2200/alternatives.json"},"ai":{"faq":[{"question":"What drive is compatible with the MH30703P11A2200's Hiperface encoder?","answer":"The single-turn SinCos Hiperface encoder is the standard feedback interface for Schneider Lexium 52 and Lexium 62 servo drives. Those drives have the Hiperface receiver built in and auto-configure the encoder parameters on power-up."},{"question":"What is the nominal torque at 400 V three-phase for MH30703P11A2200?","answer":"At 400 V three-phase, nominal torque is 22.39 lbf·in (2.53 N·m) at 5000 rpm nominal speed."},{"question":"Does the MH30703P11A2200 include a holding brake?","answer":"No, this variant is specified without a holding brake. For applications requiring a brake on the motor shaft, a different MH3 variant with brake would be needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30703P11A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30703P11A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}