{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30703P12F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30703P12F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30703P12F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30703P12F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH30703P12F2200, 1540 W continuous power, three-phase, IP65, multiturn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## Three-phase servo with holding brake — 1540 W continuous The MH30703P12F2200 is a three-phase servo motor from the Schneider Electric MH3 family, rated 1540 W continuous power with a holding brake and a multiturn SinCos Hiperface encoder for absolute position feedback. Nominal torque reaches 28.15 lbf.in (3.18 N.m) at 115 V three-phase supply, and the peak stall torque is 90.3 lbf.in (10.2 N.m) across the 115–480 V three-phase range — useful for sizing the drive's peak current capability. The IP65 rating means the motor body is dust-tight and protected against water jets, so it can be mounted in washdown zones or wet environments without a secondary cover. ## Speed-torque envelope and drive matching Nominal speed varies with supply voltage and drive model: 1250 rpm at 115 V single-phase, up to 6500 rpm at 480 V three-phase — the speed-torque curve shifts with the DC bus voltage, so the drive must be selected for the target operating point. The torque constant is 0.87 N.m/A at 120 °C copper temperature, which means the drive's current loop must deliver the commanded torque within the motor's thermal limit — the continuous stall current is 3.91 A, and the maximum RMS current is 12.57 A. ## Mounting and mechanical interface The motor flange is 70 mm (IEC standard), with a centring collar diameter of 60 mm and a depth of 2.5 mm — this mates directly with common gearbox input flanges and mounting brackets without an adapter plate. The shaft is 14 mm diameter with a parallel key, 30 mm shaft length, and the motor has no second shaft end — the load couples through the keyed shaft only. Electrical connection uses rotatable right-angled connectors — the connector orientation can be adjusted in the field to route cables away from moving parts or obstructions.","metaTitle":"Schneider Electric MH30703P12F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30703P12F2200 servo motor with brake, 1540 W continuous power, 3-phase, IP65, multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.9 in (225 mm)","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"1250 rpm LXM52 3.56 mA, 115 V, single phase 2500 rpm LXM52 3.47 mA, 230 V, single phase 5000 rpm LXM52 3.02 mA, 400 V, three phase 6500 rpm LXM52 2.74 mA, 480 V, three phase 1250 rpm LXM62 3.56 mA, 115 V, single phase 2500 rpm LXM62 3.47 mA, 230 V, single phase 5000 rpm LXM62 3.02 mA, 400 V, three phase 6500 rpm LXM62 2.74 mA, 480 V, three phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"28.15 lbf.in (3.18 N.m) LXM52 3.56 mA, 115 V, three phase 26.20 lbf.in (2.96 N.m) LXM52 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM52 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM52 2.74 mA, 480 V, three phase 28.15 lbf.in (3.18 N.m) LXM62 3.56 mA, 115 V, single phase 26.20 lbf.in (2.96 N.m) LXM62 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM62 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM62 2.74 mA, 480 V, three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.87 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1540 W","Mounting Support":"International standard flange","Sizing reference":"MH30703P","Back emf constant":"55 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"90.3 lbf.in (10.2 N.m), 115...480 V, three phase","Stator inductance":"8.64 mH","Stator resistance":"2.65 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"12.57 A","Nominal output power":"0.42 W, 115 V 0.75 W, 230 V 1.32 W, 400 V 1.54 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.91 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d0cc83d066ac1bdf3fec1663a5d22a43.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH30703P12F2200/mh3-servomotor-70mm-3-stacks-keyed-shaft-sincos-multiturn-128-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30703P12F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the MH30703P12F2200's continuous power rating?","answer":"The continuous power is 1540 W, with a continuous stall torque of 30.09 lbf.in (3.4 N.m) across the 115–480 V three-phase range."},{"question":"What encoder type does the MH30703P12F2200 use?","answer":"It uses a multiturn SinCos Hiperface encoder, which provides absolute position feedback over multiple revolutions — suitable for high-accuracy positioning without a home cycle on power-up."},{"question":"Does the MH30703P12F2200 include a holding brake?","answer":"Yes, it includes a holding brake with a holding torque of 26.6 lbf.in (3 N.m) and a brake pull-in power of 7 W — the brake engages on power loss to hold the load stationary."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30703P12F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30703P12F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}